[Thu Sep 29 22:23:29 2011] Detection parameters:
  Position = (867.0, 561.4) = 20 32 59.60 40 48 21.3
  Extent = 0.6" x 0.5", rotation angle = 74 degrees
  Source counts = 24.6 +/- 5.8
  Background counts = 9.4
  Rate = 0.0008 +/- 0.0002

[Thu Sep 29 22:23:29 2011] Off-axis axis estimate = 7.88'
[Thu Sep 29 22:26:05 2011] Using EEF radius (= 2.75 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 22:26:05 2011] Initial guess for spatial extent in simple fitting = 2.75"
[Thu Sep 29 22:26:05 2011] source mask rpix=5.6, npix_max = 148, mask sum = 140, frac = 0.945
[Thu Sep 29 22:26:05 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.75"
[Thu Sep 29 22:26:12 2011] fullrun_ccd1_acisf10970_pi14-548_cl_pass0_src3.ximg exists
[Thu Sep 29 22:26:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10970_pi14-548_cl_pass0_src3.csv
[Thu Sep 29 22:26:12 2011] fullrun_ccd1_acisf10970_pi14-548_cl_pass0_src3_1.ximg exists
[Thu Sep 29 22:26:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10970_pi14-548_cl_pass0_src3.csv
[Thu Sep 29 22:26:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10970_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10970_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 22:26:13 2011] fullrun_ccd1_acisf10970_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Thu Sep 29 22:26:13 2011] fullrun_ccd1_acisf10970_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Sep 29 22:26:13 2011] Fit fullrun_ccd1_acisf10970_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Sep 29 22:27:18 2011] Spatial fit model total counts = 67.256200, observed total counts = 70.000000
[Thu Sep 29 22:27:18 2011] Offset between fit and detection position for source 19 = 2.731411 pixels
[Thu Sep 29 22:27:18 2011] 67.799100 total counts/ 54.126100 bgd. counts: snr = 1.858491
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 2.731411 pixels
  Position = (869.1, 563.1) = 20 32 59.53 40 48 21.9
  Extent = 1.0 (0.7-2.0)", rotation angle = 0
  Source counts = 13.7 +/- 8.2
  Background counts = 54.1
  Rate = 0.0005 +/- 0.0003
[Thu Sep 29 22:27:18 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 22:27:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 22:27:18 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 22:27:18 2011] Source does appear to be extended
[Thu Sep 29 22:27:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 22:28:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 22:28:13 2011] Initial guess for spatial extent in simple fitting = 0.99"
[Thu Sep 29 22:28:13 2011] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.945
[Thu Sep 29 22:28:13 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.99"
[Thu Sep 29 22:28:14 2011] fullrun_ccd1_acisf10970_pi14-548_cl_pass1_src3.ximg exists
[Thu Sep 29 22:28:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10970_pi14-548_cl_pass1_src3.csv
[Thu Sep 29 22:28:14 2011] fullrun_ccd1_acisf10970_pi14-548_cl_pass1_src3_1.ximg exists
[Thu Sep 29 22:28:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10970_pi14-548_cl_pass1_src3.csv
[Thu Sep 29 22:28:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10970_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10970_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 22:28:14 2011] fullrun_ccd1_acisf10970_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Thu Sep 29 22:28:14 2011] fullrun_ccd1_acisf10970_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Sep 29 22:28:14 2011] Fit fullrun_ccd1_acisf10970_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Sep 29 22:28:59 2011] Spatial fit model total counts = 27.130100, observed total counts = 29.000000
[Thu Sep 29 22:28:59 2011] Offset between fit and detection position for source 19 = 1.269159 pixels
[Thu Sep 29 22:28:59 2011] 25.936810 total counts/ 6.181310 bgd. counts: snr = 7.945985
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 1.269159 pixels
  Position = (870.2, 563.8) = 20 32 59.48 40 48 22.2
  Extent = 1.4 (0.4-2.0)", rotation angle = 0
  Source counts = 19.8 +/- 5.1
  Background counts = 6.2
  Rate = 0.0007 +/- 0.0002
[Thu Sep 29 22:28:59 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 22:28:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 22:28:59 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 22:28:59 2011] Source does appear to be extended
[Thu Sep 29 22:28:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 22:31:33 2011] Not overwriting source region fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src19_src.reg
[Thu Sep 29 22:31:33 2011] Extracting stamp from image fullrun_ccd1_acisf10970_pi14-548_cl_sm2.00.img.gz, (808, 502) - (932, 626)
[Thu Sep 29 22:31:33 2011] Writing fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src19.gif
[Thu Sep 29 22:31:44 2011] ../../acisf10970/products/events/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src19_src.evt and ../../acisf10970/products/events/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Thu Sep 29 22:31:44 2011] Size of ../../acisf10970/products/events/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src19_src.evt.gz[events] = 36 counts
[Thu Sep 29 22:31:44 2011] Mean chipx,y = (521.08, 295.50)
[Thu Sep 29 22:31:44 2011] Mean tdetx,y = (4836.50, 4628.08)
[Thu Sep 29 22:31:44 2011] chipx,y range = (501.00-548.00, 273.00-314.00)
[Thu Sep 29 22:31:44 2011] Size of ../../acisf10970/products/events/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 116 counts
[Thu Sep 29 22:31:44 2011] ../../acisf10970/products/images/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src19_src.img and ../../acisf10970/products/images/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Thu Sep 29 22:31:44 2011] ../../acisf10970/products/spectra/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src19_src.pi and ../../acisf10970/products/spectra/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src19_bgd.pi exist, delete to re-create
[Thu Sep 29 22:31:44 2011] Not generating rmf since there are only 19 counts
[Thu Sep 29 22:31:51 2011] ../../acisf10970/products/lightcurves/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src19_src.lc and ../../acisf10970/products/lightcurves/fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Thu Sep 29 22:33:04 2011] 162.682
[Thu Sep 29 22:42:23 2011] Updating aperture counts using extracted products
[Thu Sep 29 22:42:23 2011] Error reading totcts from fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src19_src.pi.gz
[Thu Sep 29 22:42:23 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 22:42:23 2011] Using photon index=1.80, rate=0.00067, arf fullrun_ccd1_acisf10970_pi14-548_pass1_cl_src19.arf
[Thu Sep 29 22:42:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 22:42:23 2011] Updating source flux to 1.2e-14
[Thu Sep 29 22:42:37 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting