[Fri Sep 30 05:19:23 2011] Detection parameters:
  Position = (566.0, 1012.1) = 20 34 35.47 41 27 49.2
  Extent = 0.9" x 0.7", rotation angle = 67 degrees
  Source counts = 22.2 +/- 4.9
  Background counts = 1.8
  Rate = 0.0008 +/- 0.0002

[Fri Sep 30 05:19:25 2011] Off-axis axis estimate = 5.07'
[Fri Sep 30 05:20:24 2011] Using EEF radius (= 1.21 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 05:20:24 2011] Initial guess for spatial extent in simple fitting = 1.21"
[Fri Sep 30 05:20:24 2011] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.029
[Fri Sep 30 05:20:24 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.21"
[Fri Sep 30 05:20:25 2011] fullrun_ccd3_acisf10967_pi14-548_cl_pass0_src3.ximg exists
[Fri Sep 30 05:20:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10967_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 05:20:25 2011] fullrun_ccd3_acisf10967_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Sep 30 05:20:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10967_pi14-548_cl_pass0_src3.csv
[Fri Sep 30 05:20:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10967_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10967_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 05:20:25 2011] fullrun_ccd3_acisf10967_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Sep 30 05:20:25 2011] fullrun_ccd3_acisf10967_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Sep 30 05:20:25 2011] Fit fullrun_ccd3_acisf10967_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Sep 30 05:20:40 2011] Spatial fit model total counts = 26.691100, observed total counts = 27.000000
[Fri Sep 30 05:20:40 2011] Offset between fit and detection position for source 31 = 0.333451 pixels
[Fri Sep 30 05:20:40 2011] 26.522090 total counts/ 5.928590 bgd. counts: snr = 8.457742
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.333451 pixels
  Position = (566.2, 1012.4) = 20 34 35.48 41 27 49.1
  Extent = 0.9 (0.6-1.4)", rotation angle = 0
  Source counts = 20.6 +/- 5.1
  Background counts = 5.9
  Rate = 0.0007 +/- 0.0002
[Fri Sep 30 05:20:40 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 05:20:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 05:20:40 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 05:20:40 2011] Source does appear to be extended
[Fri Sep 30 05:20:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 05:21:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 05:21:06 2011] Initial guess for spatial extent in simple fitting = 0.94"
[Fri Sep 30 05:21:06 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.069
[Fri Sep 30 05:21:06 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.94"
[Fri Sep 30 05:21:06 2011] fullrun_ccd3_acisf10967_pi14-548_cl_pass1_src3.ximg exists
[Fri Sep 30 05:21:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10967_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 05:21:06 2011] fullrun_ccd3_acisf10967_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Sep 30 05:21:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10967_pi14-548_cl_pass1_src3.csv
[Fri Sep 30 05:21:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10967_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10967_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 05:21:06 2011] fullrun_ccd3_acisf10967_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Sep 30 05:21:06 2011] fullrun_ccd3_acisf10967_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Sep 30 05:21:06 2011] Fit fullrun_ccd3_acisf10967_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Sep 30 05:21:17 2011] Spatial fit model total counts = 27.321000, observed total counts = 27.000000
[Fri Sep 30 05:21:17 2011] Offset between fit and detection position for source 31 = 0.014544 pixels
[Fri Sep 30 05:21:17 2011] 27.139160 total counts/ 6.370760 bgd. counts: snr = 8.228249
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.014544 pixels
  Position = (566.2, 1012.4) = 20 34 35.48 41 27 49.1
  Extent = 0.9 (0.6-1.4)", rotation angle = 0
  Source counts = 20.8 +/- 5.2
  Background counts = 6.4
  Rate = 0.0007 +/- 0.0002
[Fri Sep 30 05:21:17 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 05:21:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 05:21:17 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 05:21:17 2011] Source does appear to be extended
[Fri Sep 30 05:21:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 05:24:35 2011] Not overwriting source region fullrun_ccd3_acisf10967_pi14-548_pass1_cl_src31_src.reg
[Fri Sep 30 05:24:35 2011] Extracting stamp from image fullrun_ccd3_acisf10967_pi14-548_cl_sm2.00.img.gz, (524, 970) - (609, 1055)
[Fri Sep 30 05:24:35 2011] Writing fullrun_ccd3_acisf10967_pi14-548_pass1_cl_src31.gif
[Fri Sep 30 05:24:46 2011] ../../acisf10967/products/events/fullrun_ccd3_acisf10967_pi14-548_pass1_cl_src31_src.evt and ../../acisf10967/products/events/fullrun_ccd3_acisf10967_pi14-548_pass1_cl_src31_bgd.evt exist, delete to re-create
[Fri Sep 30 05:24:46 2011] Size of ../../acisf10967/products/events/fullrun_ccd3_acisf10967_pi14-548_pass1_cl_src31_src.evt.gz[events] = 25 counts
[Fri Sep 30 05:24:46 2011] Mean chipx,y = (363.36, 816.40)
[Fri Sep 30 05:24:46 2011] Mean tdetx,y = (4315.60, 3424.36)
[Fri Sep 30 05:24:46 2011] chipx,y range = (345.00-377.00, 800.00-839.00)
[Fri Sep 30 05:24:46 2011] Size of ../../acisf10967/products/events/fullrun_ccd3_acisf10967_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 27 counts
[Fri Sep 30 05:24:46 2011] ../../acisf10967/products/images/fullrun_ccd3_acisf10967_pi14-548_pass1_cl_src31_src.img and ../../acisf10967/products/images/fullrun_ccd3_acisf10967_pi14-548_pass1_cl_src31_bgd.img exist, delete to re-create
[Fri Sep 30 05:24:46 2011] ../../acisf10967/products/spectra/fullrun_ccd3_acisf10967_pi14-548_pass1_cl_src31_src.pi and ../../acisf10967/products/spectra/fullrun_ccd3_acisf10967_pi14-548_pass1_cl_src31_bgd.pi exist, delete to re-create
[Fri Sep 30 05:24:46 2011] Not generating rmf since there are only 20 counts
[Fri Sep 30 05:24:50 2011] ../../acisf10967/products/lightcurves/fullrun_ccd3_acisf10967_pi14-548_pass1_cl_src31_src.lc and ../../acisf10967/products/lightcurves/fullrun_ccd3_acisf10967_pi14-548_pass1_cl_src31_bgd.lc exist, delete to re-create
[Fri Sep 30 05:27:14 2011] 180.288
[Fri Sep 30 05:27:34 2011] Updating aperture counts using extracted products
[Fri Sep 30 05:27:34 2011] Error reading totcts from fullrun_ccd3_acisf10967_pi14-548_pass1_cl_src31_src.pi.gz
[Fri Sep 30 05:27:34 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 05:27:34 2011] Using photon index=1.80, rate=0.000719, arf fullrun_ccd3_acisf10967_pi14-548_pass1_cl_src31.arf
[Fri Sep 30 05:27:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 05:27:34 2011] Updating source flux to 1.2e-14
[Fri Sep 30 05:27:50 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 30 05:27:51 2011] acisf10967/analysis//spectral/fullrun_ccd3_acisf10967_pi14-548_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete