[Fri Sep 30 05:19:17 2011] Detection parameters:
  Position = (1126.7, 651.5) = 20 34 47.56 41 29 52.5
  Extent = 0.8" x 0.5", rotation angle = 141 degrees
  Source counts = 12.2 +/- 3.6
  Background counts = 0.8
  Rate = 0.0004 +/- 0.0001

[Fri Sep 30 05:19:18 2011] Off-axis axis estimate = 5.25'
[Fri Sep 30 05:20:22 2011] Using EEF radius (= 1.28 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 05:20:22 2011] Initial guess for spatial extent in simple fitting = 1.28"
[Fri Sep 30 05:20:22 2011] source mask rpix=2.6, npix_max = 38, mask sum = 35, frac = 0.906
[Fri Sep 30 05:20:22 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 1.28"
[Fri Sep 30 05:20:24 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass0_src12.ximg exists
[Fri Sep 30 05:20:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10967_pi14-548_cl_pass0_src12.csv
[Fri Sep 30 05:20:24 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass0_src12_1.ximg exists
[Fri Sep 30 05:20:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10967_pi14-548_cl_pass0_src12.csv
[Fri Sep 30 05:20:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10967_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10967_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 05:20:24 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Fri Sep 30 05:20:24 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Sep 30 05:20:24 2011] Fit fullrun_ccd2_acisf10967_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Sep 30 05:20:38 2011] Spatial fit model total counts = 16.943000, observed total counts = 19.000000
[Fri Sep 30 05:20:38 2011] Offset between fit and detection position for source 12 = 1.115755 pixels
[Fri Sep 30 05:20:38 2011] 16.214801 total counts/ 0.339801 bgd. counts: snr = 27.233371
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.115755 pixels
  Position = (1126.4, 652.6) = 20 34 47.59 41 29 52.8
  Extent = 1.5 (1.3-3.0)" x 0.5 (0.3-0.8)", rotation angle = 220 (206-232) degrees
  Source counts = 15.9 +/- 4.0
  Background counts = 0.3
  Rate = 0.0005 +/- 0.0001
[Fri Sep 30 05:20:38 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 05:20:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 05:20:38 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 05:20:38 2011] Source does appear to be extended
[Fri Sep 30 05:20:38 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.70
[Fri Sep 30 05:20:38 2011] Source is asymmetric
[Fri Sep 30 05:21:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 05:21:05 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Fri Sep 30 05:21:05 2011] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.817
[Fri Sep 30 05:21:05 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 1.00"
[Fri Sep 30 05:21:05 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass1_src11.ximg exists
[Fri Sep 30 05:21:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10967_pi14-548_cl_pass1_src11.csv
[Fri Sep 30 05:21:05 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass1_src11_1.ximg exists
[Fri Sep 30 05:21:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10967_pi14-548_cl_pass1_src11.csv
[Fri Sep 30 05:21:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10967_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10967_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 05:21:06 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Fri Sep 30 05:21:06 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Sep 30 05:21:06 2011] Fit fullrun_ccd2_acisf10967_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Sep 30 05:21:15 2011] Spatial fit model total counts = 19.090100, observed total counts = 19.000000
[Fri Sep 30 05:21:15 2011] Offset between fit and detection position for source 12 = 0.533034 pixels
[Fri Sep 30 05:21:15 2011] 18.319640 total counts/ 7.115140 bgd. counts: snr = 4.200498
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.533034 pixels
  Position = (1126.9, 652.3) = 20 34 47.57 41 29 52.6
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 11.2 +/- 4.3
  Background counts = 7.1
  Rate = 0.0004 +/- 0.0001
[Fri Sep 30 05:21:15 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 05:21:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 05:21:15 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 05:21:15 2011] Source does appear to be extended
[Fri Sep 30 05:21:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 05:22:37 2011] Not overwriting source region fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src12_src.reg
[Fri Sep 30 05:22:37 2011] Extracting stamp from image fullrun_ccd2_acisf10967_pi14-548_cl_sm2.00.img.gz, (1097, 623) - (1156, 682)
[Fri Sep 30 05:22:37 2011] Writing fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src12.gif
[Fri Sep 30 05:23:12 2011] ../../acisf10967/products/events/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src12_src.evt and ../../acisf10967/products/events/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Fri Sep 30 05:23:12 2011] Size of ../../acisf10967/products/events/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src12_src.evt.gz[events] = 14 counts
[Fri Sep 30 05:23:12 2011] Mean chipx,y = (697.43, 875.93)
[Fri Sep 30 05:23:12 2011] Mean tdetx,y = (3936.93, 3388.57)
[Fri Sep 30 05:23:12 2011] chipx,y range = (685.00-710.00, 862.00-897.00)
[Fri Sep 30 05:23:12 2011] Size of ../../acisf10967/products/events/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 9 counts
[Fri Sep 30 05:23:12 2011] ../../acisf10967/products/images/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src12_src.img and ../../acisf10967/products/images/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Fri Sep 30 05:23:12 2011] ../../acisf10967/products/spectra/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src12_src.pi and ../../acisf10967/products/spectra/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Fri Sep 30 05:23:12 2011] Not generating rmf since there are only 11 counts
[Fri Sep 30 05:23:16 2011] ../../acisf10967/products/lightcurves/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src12_src.lc and ../../acisf10967/products/lightcurves/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Fri Sep 30 05:24:35 2011] 174.296
[Fri Sep 30 05:27:33 2011] Updating aperture counts using extracted products
[Fri Sep 30 05:27:33 2011] Error reading totcts from fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src12_src.pi.gz
[Fri Sep 30 05:27:33 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 05:27:33 2011] Using photon index=1.80, rate=0.000388, arf fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src12.arf
[Fri Sep 30 05:27:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 05:27:33 2011] Updating source flux to 6.5e-15
[Fri Sep 30 05:27:45 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting