[Fri Sep 30 05:19:17 2011] Detection parameters:
  Position = (1059.4, 383.5) = 20 34 50.51 41 27 40.6
  Extent = 0.6" x 0.5", rotation angle = 168 degrees
  Source counts = 29.0 +/- 5.5
  Background counts = 1.0
  Rate = 0.001 +/- 0.0002

[Fri Sep 30 05:19:18 2011] Off-axis axis estimate = 3.02'
[Fri Sep 30 05:20:22 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 05:20:22 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Fri Sep 30 05:20:22 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.791
[Fri Sep 30 05:20:22 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.58"
[Fri Sep 30 05:20:24 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass0_src2.ximg exists
[Fri Sep 30 05:20:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10967_pi14-548_cl_pass0_src2.csv
[Fri Sep 30 05:20:24 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Sep 30 05:20:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10967_pi14-548_cl_pass0_src2.csv
[Fri Sep 30 05:20:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10967_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10967_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 05:20:24 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Sep 30 05:20:24 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Sep 30 05:20:24 2011] Fit fullrun_ccd2_acisf10967_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Sep 30 05:20:38 2011] Spatial fit model total counts = 29.191000, observed total counts = 31.000000
[Fri Sep 30 05:20:38 2011] Offset between fit and detection position for source 10 = 0.753800 pixels
[Fri Sep 30 05:20:38 2011] 28.668900 total counts/ 0.000000 bgd. counts: snr = 663468429637205.625000
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.753800 pixels
  Position = (1059.9, 384.0) = 20 34 50.51 41 27 40.6
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 28.7 +/- 5.4
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Fri Sep 30 05:20:38 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 05:20:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 05:20:38 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 05:20:38 2011] Source does appear to be extended
[Fri Sep 30 05:20:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 05:21:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 05:21:05 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Fri Sep 30 05:21:05 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.142
[Fri Sep 30 05:21:05 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.67"
[Fri Sep 30 05:21:05 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass1_src2.ximg exists
[Fri Sep 30 05:21:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10967_pi14-548_cl_pass1_src2.csv
[Fri Sep 30 05:21:05 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Sep 30 05:21:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10967_pi14-548_cl_pass1_src2.csv
[Fri Sep 30 05:21:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10967_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10967_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 05:21:05 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Sep 30 05:21:05 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Sep 30 05:21:05 2011] Fit fullrun_ccd2_acisf10967_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Sep 30 05:21:15 2011] Spatial fit model total counts = 30.796200, observed total counts = 32.000000
[Fri Sep 30 05:21:15 2011] Offset between fit and detection position for source 10 = 0.044158 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.044158 pixels
  Position = (1059.9, 384.0) = 20 34 50.51 41 27 40.6
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 30.3 +/- 5.5
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Fri Sep 30 05:21:15 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 05:21:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 05:21:15 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 05:21:15 2011] Source does appear to be extended
[Fri Sep 30 05:21:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 05:22:37 2011] Not overwriting source region fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src10_src.reg
[Fri Sep 30 05:22:37 2011] Extracting stamp from image fullrun_ccd2_acisf10967_pi14-548_cl_sm2.00.img.gz, (1030, 354) - (1090, 414)
[Fri Sep 30 05:22:37 2011] Writing fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src10.gif
[Fri Sep 30 05:22:41 2011] ../../acisf10967/products/events/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src10_src.evt and ../../acisf10967/products/events/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Sep 30 05:22:41 2011] Size of ../../acisf10967/products/events/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src10_src.evt.gz[events] = 30 counts
[Fri Sep 30 05:22:41 2011] Mean chipx,y = (444.37, 984.60)
[Fri Sep 30 05:22:41 2011] Mean tdetx,y = (4045.60, 3641.63)
[Fri Sep 30 05:22:41 2011] chipx,y range = (429.00-462.00, 968.00-1002.00)
[Fri Sep 30 05:22:41 2011] Size of ../../acisf10967/products/events/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 15 counts
[Fri Sep 30 05:22:41 2011] ../../acisf10967/products/images/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src10_src.img and ../../acisf10967/products/images/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Sep 30 05:22:41 2011] ../../acisf10967/products/spectra/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src10_src.pi and ../../acisf10967/products/spectra/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Sep 30 05:22:41 2011] Not generating rmf since there are only 30 counts
[Fri Sep 30 05:22:44 2011] ../../acisf10967/products/lightcurves/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src10_src.lc and ../../acisf10967/products/lightcurves/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Sep 30 05:24:34 2011] 184.578
[Fri Sep 30 05:27:33 2011] Updating aperture counts using extracted products
[Fri Sep 30 05:27:33 2011] Error reading totcts from fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Sep 30 05:27:33 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 05:27:33 2011] Using photon index=1.80, rate=0.00105, arf fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src10.arf
[Fri Sep 30 05:27:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 05:27:33 2011] Updating source flux to 1.7e-14
[Fri Sep 30 05:27:45 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting