[Fri Sep 30 05:19:17 2011] Detection parameters:
  Position = (789.8, 457.3) = 20 35 2.31 41 28 16.9
  Extent = 0.7" x 0.5", rotation angle = 156 degrees
  Source counts = 175.1 +/- 13.3
  Background counts = 2.9
  Rate = 0.006 +/- 0.0005

[Fri Sep 30 05:19:18 2011] Off-axis axis estimate = 3.38'
[Fri Sep 30 05:20:22 2011] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 05:20:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 05:20:22 2011] Initial guess for spatial extent in simple fitting = 0.66"
[Fri Sep 30 05:20:22 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.170
[Fri Sep 30 05:20:22 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.66"
[Fri Sep 30 05:20:24 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 05:20:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10967_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 05:20:24 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 05:20:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10967_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 05:20:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10967_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10967_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 05:20:24 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 05:20:24 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 05:20:24 2011] Fit fullrun_ccd2_acisf10967_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 05:20:38 2011] Spatial fit model total counts = 179.598000, observed total counts = 179.000000
[Fri Sep 30 05:20:38 2011] Offset between fit and detection position for source 1 = 0.720351 pixels
[Fri Sep 30 05:20:38 2011] 178.963900 total counts/ 11.786900 bgd. counts: snr = 48.694143
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.720351 pixels
  Position = (790.3, 457.8) = 20 35 2.31 41 28 16.9
  Extent = 0.7 (0.7-0.9)", rotation angle = 0
  Source counts = 167.2 +/- 13.4
  Background counts = 11.8
  Rate = 0.006 +/- 0.0005
[Fri Sep 30 05:20:38 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 05:20:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 05:20:38 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 05:20:38 2011] Source does appear to be extended
[Fri Sep 30 05:20:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 05:21:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 05:21:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 05:21:05 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Fri Sep 30 05:21:05 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.978
[Fri Sep 30 05:21:05 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.75"
[Fri Sep 30 05:21:05 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 05:21:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10967_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 05:21:05 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 05:21:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10967_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 05:21:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10967_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10967_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 05:21:05 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 05:21:05 2011] fullrun_ccd2_acisf10967_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 05:21:05 2011] Fit fullrun_ccd2_acisf10967_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 05:21:15 2011] Spatial fit model total counts = 178.822000, observed total counts = 179.000000
[Fri Sep 30 05:21:15 2011] Offset between fit and detection position for source 1 = 0.019839 pixels
[Fri Sep 30 05:21:15 2011] 178.177000 total counts/ 10.730000 bgd. counts: snr = 51.118430
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.019839 pixels
  Position = (790.3, 457.8) = 20 35 2.31 41 28 16.9
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 167.4 +/- 13.3
  Background counts = 10.7
  Rate = 0.006 +/- 0.0005
[Fri Sep 30 05:21:15 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 05:21:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 05:21:15 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 05:21:15 2011] Source does appear to be extended
[Fri Sep 30 05:21:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 05:22:37 2011] Not overwriting source region fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 30 05:22:37 2011] Extracting stamp from image fullrun_ccd2_acisf10967_pi14-548_cl_sm2.00.img.gz, (756, 423) - (825, 493)
[Fri Sep 30 05:22:37 2011] Writing fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src1.gif
[Fri Sep 30 05:22:38 2011] ../../acisf10967/products/events/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src1_src.evt and ../../acisf10967/products/events/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 30 05:22:38 2011] Size of ../../acisf10967/products/events/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src1_src.evt.gz[events] = 177 counts
[Fri Sep 30 05:22:38 2011] Mean chipx,y = (342.75, 725.26)
[Fri Sep 30 05:22:38 2011] Mean tdetx,y = (3786.26, 3743.25)
[Fri Sep 30 05:22:38 2011] chipx,y range = (325.00-362.00, 704.00-745.00)
[Fri Sep 30 05:22:38 2011] Size of ../../acisf10967/products/events/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 27 counts
[Fri Sep 30 05:22:38 2011] ../../acisf10967/products/images/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src1_src.img and ../../acisf10967/products/images/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 30 05:22:38 2011] ../../acisf10967/products/spectra/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src1_src.pi and ../../acisf10967/products/spectra/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 30 05:22:41 2011] ../../acisf10967/products/lightcurves/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src1_src.lc and ../../acisf10967/products/lightcurves/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 30 05:24:34 2011] Keeping rmf generated by specextract
[Fri Sep 30 05:24:34 2011] 189.478
[Fri Sep 30 05:27:33 2011] Updating aperture counts using extracted products
[Fri Sep 30 05:27:33 2011] Error reading totcts from fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 30 05:27:33 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 05:27:33 2011] Using photon index=1.80, rate=0.0058, arf fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 05:27:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 05:27:33 2011] Updating source flux to 9e-14
[Fri Sep 30 05:27:50 2011] Reading fit data from acisf10967/analysis//spectral/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src1_pl.csv
[Fri Sep 30 05:27:50 2011] Spectral fit parameter nH value = 1.23642e+22
[Fri Sep 30 05:27:50 2011] Spectral fit parameter PhoIndex value = 2.35775
[Fri Sep 30 05:27:50 2011] Failed to get F(0.3-8.0) from acisf10967/analysis//spectral/fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 05:27:50 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 05:27:50 2011] Using Nh = 1.2e+22, photon index=2.36, rate=0.0058, arf fullrun_ccd2_acisf10967_pi14-548_pass1_cl_src1.arf
[Fri Sep 30 05:27:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 05:27:50 2011] Updating source flux to 7.6e-14