[Sat Oct  1 16:50:33 2011] Detection parameters:
  Position = (237.4, 538.0) = 20 34 30.16 41 31 6.0
  Extent = 0.5" x 0.5", rotation angle = 94 degrees
  Source counts = 31.0 +/- 5.7
  Background counts = 1.0
  Rate = 0.001 +/- 0.0002

[Sat Oct  1 16:50:37 2011] Off-axis axis estimate = 1.86'
[Sat Oct  1 16:52:14 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 16:52:14 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sat Oct  1 16:52:14 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.825
[Sat Oct  1 16:52:14 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.42"
[Sat Oct  1 16:52:15 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src11.ximg exists
[Sat Oct  1 16:52:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src11.csv
[Sat Oct  1 16:52:15 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src11_1.ximg exists
[Sat Oct  1 16:52:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src11.csv
[Sat Oct  1 16:52:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 16:52:19 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sat Oct  1 16:52:19 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Oct  1 16:52:19 2011] Fit fullrun_ccd3_acisf10966_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Oct  1 16:52:42 2011] Spatial fit model total counts = 34.936300, observed total counts = 35.000000
[Sat Oct  1 16:52:42 2011] Offset between fit and detection position for source 5 = 0.704710 pixels
[Sat Oct  1 16:52:42 2011] 35.223420 total counts/ 3.807620 bgd. counts: snr = 16.099831
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.704710 pixels
  Position = (237.9, 538.5) = 20 34 30.16 41 31 6.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 31.4 +/- 5.9
  Background counts = 3.8
  Rate = 0.001 +/- 0.0002
[Sat Oct  1 16:52:42 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 16:52:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 16:52:42 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 16:52:42 2011] Source does appear to be extended
[Sat Oct  1 16:52:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 16:53:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 16:53:23 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Sat Oct  1 16:53:23 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.873
[Sat Oct  1 16:53:23 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.40"
[Sat Oct  1 16:53:24 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src11.ximg exists
[Sat Oct  1 16:53:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src11.csv
[Sat Oct  1 16:53:24 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src11_1.ximg exists
[Sat Oct  1 16:53:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src11.csv
[Sat Oct  1 16:53:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 16:53:31 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sat Oct  1 16:53:31 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Oct  1 16:53:31 2011] Fit fullrun_ccd3_acisf10966_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Oct  1 16:53:54 2011] Spatial fit model total counts = 32.392200, observed total counts = 35.000000
[Sat Oct  1 16:53:54 2011] Offset between fit and detection position for source 5 = 0.004531 pixels
[Sat Oct  1 16:53:54 2011] 33.115670 total counts/ 1.519770 bgd. counts: snr = 25.629598
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.004531 pixels
  Position = (237.9, 538.5) = 20 34 30.16 41 31 6.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 31.6 +/- 5.8
  Background counts = 1.5
  Rate = 0.001 +/- 0.0002
[Sat Oct  1 16:53:54 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 16:53:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 16:53:54 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 16:53:54 2011] Source does appear to be extended
[Sat Oct  1 16:53:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 16:57:49 2011] Not overwriting source region fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src5_src.reg
[Sat Oct  1 16:57:49 2011] Extracting stamp from image fullrun_ccd3_acisf10966_pi14-548_cl_sm2.00.img.gz, (219, 520) - (257, 557)
[Sat Oct  1 16:57:49 2011] Writing fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src5.gif
[Sat Oct  1 16:58:24 2011] ../../acisf10966/products/events/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src5_src.evt and ../../acisf10966/products/events/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sat Oct  1 16:58:24 2011] Size of ../../acisf10966/products/events/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src5_src.evt.gz[events] = 32 counts
[Sat Oct  1 16:58:24 2011] Mean chipx,y = (934.00, 796.81)
[Sat Oct  1 16:58:24 2011] Mean tdetx,y = (4335.19, 3995.00)
[Sat Oct  1 16:58:24 2011] chipx,y range = (915.00-951.00, 783.00-816.00)
[Sat Oct  1 16:58:24 2011] Size of ../../acisf10966/products/events/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 11 counts
[Sat Oct  1 16:58:24 2011] ../../acisf10966/products/images/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src5_src.img and ../../acisf10966/products/images/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sat Oct  1 16:58:24 2011] ../../acisf10966/products/spectra/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src5_src.pi and ../../acisf10966/products/spectra/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sat Oct  1 16:58:24 2011] Not generating rmf since there are only 31 counts
[Sat Oct  1 16:58:27 2011] ../../acisf10966/products/lightcurves/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src5_src.lc and ../../acisf10966/products/lightcurves/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sat Oct  1 17:00:31 2011] 201.514
[Sat Oct  1 17:00:40 2011] Updating aperture counts using extracted products
[Sat Oct  1 17:00:40 2011] Error reading totcts from fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src5_src.pi.gz
[Sat Oct  1 17:00:41 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 17:00:41 2011] Using photon index=1.80, rate=0.00108, arf fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src5.arf
[Sat Oct  1 17:00:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 17:00:41 2011] Updating source flux to 1.6e-14
[Sat Oct  1 17:01:00 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting