[Sat Oct  1 16:50:36 2011] Detection parameters:
  Position = (486.8, 1121.4) = 20 34 19.21 41 35 52.9
  Extent = 0.7" x 0.5", rotation angle = 85 degrees
  Source counts = 10.8 +/- 3.5
  Background counts = 1.2
  Rate = 0.0004 +/- 0.0001

[Sat Oct  1 16:50:37 2011] Off-axis axis estimate = 5.22'
[Sat Oct  1 16:52:14 2011] Using EEF radius (= 1.27 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 16:52:14 2011] Initial guess for spatial extent in simple fitting = 1.27"
[Sat Oct  1 16:52:14 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.950
[Sat Oct  1 16:52:14 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 1.27"
[Sat Oct  1 16:52:16 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src30.ximg exists
[Sat Oct  1 16:52:16 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src30_1.ximg exists
[Sat Oct  1 16:52:16 2011] Fit fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src30 appears to have run properly
[Sat Oct  1 16:52:21 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Sat Oct  1 16:52:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10966_pi14-548_cl_pass0_tfrozen_src30.csv
[Sat Oct  1 16:52:21 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Sat Oct  1 16:52:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10966_pi14-548_cl_pass0_tfrozen_src30.csv
[Sat Oct  1 16:52:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10966_pi14-548_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10966_pi14-548_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 16:52:42 2011] Spatial fit model total counts = 12.681600, observed total counts = 15.000000
[Sat Oct  1 16:52:42 2011] Offset between fit and detection position for source 36 = 0.943705 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.943705 pixels
  Position = (487.3, 1122.2) = 20 34 19.21 41 35 53.1
  Extent = 0.7 (0.6-1.2)", rotation angle = 0
  Source counts = 12.1 +/- 3.5
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Sat Oct  1 16:52:42 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 16:52:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 16:52:42 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 16:52:42 2011] Source does appear to be extended
[Sat Oct  1 16:52:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 16:53:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 16:53:23 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Sat Oct  1 16:53:23 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.978
[Sat Oct  1 16:53:23 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 0.75"
[Sat Oct  1 16:53:31 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src30.ximg exists
[Sat Oct  1 16:53:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src30.csv
[Sat Oct  1 16:53:31 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src30_1.ximg exists
[Sat Oct  1 16:53:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src30.csv
[Sat Oct  1 16:53:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 16:53:36 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Sat Oct  1 16:53:36 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Sat Oct  1 16:53:36 2011] Fit fullrun_ccd3_acisf10966_pi14-548_cl_pass1_tfrozen_src30 appears to have run properly
[Sat Oct  1 16:53:54 2011] Spatial fit model total counts = 15.996900, observed total counts = 16.000000
[Sat Oct  1 16:53:54 2011] Offset between fit and detection position for source 36 = 0.242602 pixels
[Sat Oct  1 16:53:54 2011] 15.742260 total counts/ 5.376060 bgd. counts: snr = 4.470824
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.242602 pixels
  Position = (487.4, 1122.1) = 20 34 19.20 41 35 53.0
  Extent = 0.7 (0.5-1.2)", rotation angle = 0
  Source counts = 10.4 +/- 4.0
  Background counts = 5.4
  Rate = 0.0004 +/- 0.0001
[Sat Oct  1 16:53:54 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 16:53:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 16:53:54 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 16:53:54 2011] Source does appear to be extended
[Sat Oct  1 16:53:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 16:57:49 2011] Not overwriting source region fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src36_src.reg
[Sat Oct  1 16:57:49 2011] Extracting stamp from image fullrun_ccd3_acisf10966_pi14-548_cl_sm2.00.img.gz, (453, 1088) - (521, 1156)
[Sat Oct  1 16:57:49 2011] Writing fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src36.gif
[Sat Oct  1 16:59:27 2011] ../../acisf10966/products/events/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src36_src.evt and ../../acisf10966/products/events/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src36_bgd.evt exist, delete to re-create
[Sat Oct  1 16:59:27 2011] Size of ../../acisf10966/products/events/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src36_src.evt.gz[events] = 13 counts
[Sat Oct  1 16:59:27 2011] Mean chipx,y = (313.92, 947.85)
[Sat Oct  1 16:59:27 2011] Mean tdetx,y = (4184.15, 3374.92)
[Sat Oct  1 16:59:27 2011] chipx,y range = (298.00-332.00, 931.00-964.00)
[Sat Oct  1 16:59:27 2011] Size of ../../acisf10966/products/events/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 21 counts
[Sat Oct  1 16:59:27 2011] ../../acisf10966/products/images/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src36_src.img and ../../acisf10966/products/images/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src36_bgd.img exist, delete to re-create
[Sat Oct  1 16:59:27 2011] ../../acisf10966/products/spectra/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src36_src.pi and ../../acisf10966/products/spectra/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src36_bgd.pi exist, delete to re-create
[Sat Oct  1 16:59:27 2011] Not generating rmf since there are only 10 counts
[Sat Oct  1 16:59:30 2011] ../../acisf10966/products/lightcurves/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src36_src.lc and ../../acisf10966/products/lightcurves/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src36_bgd.lc exist, delete to re-create
[Sat Oct  1 17:00:33 2011] 177.796
[Sat Oct  1 17:00:41 2011] Updating aperture counts using extracted products
[Sat Oct  1 17:00:41 2011] Error reading totcts from fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src36_src.pi.gz
[Sat Oct  1 17:00:41 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 17:00:41 2011] Using photon index=1.80, rate=0.000355, arf fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src36.arf
[Sat Oct  1 17:00:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 17:00:41 2011] Updating source flux to 5.9e-15
[Sat Oct  1 17:01:00 2011] Source 36 has fewer than 100.000000 counts, skipping spectral fitting