[Sat Oct  1 16:50:35 2011] Detection parameters:
  Position = (709.0, 920.2) = 20 34 9.47 41 34 13.8
  Extent = 0.9" x 0.5", rotation angle = 111 degrees
  Source counts = 19.8 +/- 4.6
  Background counts = 1.2
  Rate = 0.0007 +/- 0.0002

[Sat Oct  1 16:50:37 2011] Off-axis axis estimate = 5.83'
[Sat Oct  1 16:52:14 2011] Using EEF radius (= 1.54 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 16:52:14 2011] Initial guess for spatial extent in simple fitting = 1.54"
[Sat Oct  1 16:52:14 2011] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.057
[Sat Oct  1 16:52:14 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 1.54"
[Sat Oct  1 16:52:16 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src18.ximg exists
[Sat Oct  1 16:52:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src18.csv
[Sat Oct  1 16:52:16 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src18_1.ximg exists
[Sat Oct  1 16:52:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src18.csv
[Sat Oct  1 16:52:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 16:52:20 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Sat Oct  1 16:52:20 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Oct  1 16:52:20 2011] Fit fullrun_ccd3_acisf10966_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Sat Oct  1 16:52:42 2011] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 17.191729 pixels away
[Sat Oct  1 16:52:42 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 16:52:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 16:52:42 2011] Assessing source extent using major
[Sat Oct  1 16:52:42 2011] Source does appear to be extended
[Sat Oct  1 16:52:42 2011] Computing asymmetry using major and minor axis, asym = 1.67
[Sat Oct  1 16:52:42 2011] Source is asymmetric
[Sat Oct  1 16:53:23 2011] Using EEF radius (= 1.54 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 16:53:23 2011] Initial guess for spatial extent in simple fitting = 1.54"
[Sat Oct  1 16:53:23 2011] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.057
[Sat Oct  1 16:53:23 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 1.54"
[Sat Oct  1 16:53:25 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src18.ximg exists
[Sat Oct  1 16:53:25 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src18_1.ximg exists
[Sat Oct  1 16:53:25 2011] Fit fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src18 appears to have run properly
[Sat Oct  1 16:53:32 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Sat Oct  1 16:53:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10966_pi14-548_cl_pass1_tfrozen_src18.csv
[Sat Oct  1 16:53:32 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Oct  1 16:53:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10966_pi14-548_cl_pass1_tfrozen_src18.csv
[Sat Oct  1 16:53:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10966_pi14-548_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10966_pi14-548_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 16:53:54 2011] Spatial fit model total counts = 25.028600, observed total counts = 28.000000
[Sat Oct  1 16:53:54 2011] Offset between fit and detection position for source 17 = 0.651178 pixels
[Sat Oct  1 16:53:54 2011] 25.438720 total counts/ 6.162720 bgd. counts: snr = 7.764808
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.651178 pixels
  Position = (709.7, 920.3) = 20 34 9.47 41 34 13.6
  Extent = 0.9 (0.7-1.2)", rotation angle = 0
  Source counts = 19.3 +/- 5.0
  Background counts = 6.2
  Rate = 0.0007 +/- 0.0002
[Sat Oct  1 16:53:54 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 16:53:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 16:53:54 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 16:53:54 2011] Source does appear to be extended
[Sat Oct  1 16:53:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 16:57:49 2011] Not overwriting source region fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src17_src.reg
[Sat Oct  1 16:57:49 2011] Extracting stamp from image fullrun_ccd3_acisf10966_pi14-548_cl_sm2.00.img.gz, (669, 880) - (750, 961)
[Sat Oct  1 16:57:49 2011] Writing fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src17.gif
[Sat Oct  1 16:58:47 2011] ../../acisf10966/products/events/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src17_src.evt and ../../acisf10966/products/events/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Sat Oct  1 16:58:47 2011] Size of ../../acisf10966/products/events/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src17_src.evt.gz[events] = 21 counts
[Sat Oct  1 16:58:47 2011] Mean chipx,y = (345.48, 649.52)
[Sat Oct  1 16:58:47 2011] Mean tdetx,y = (4482.48, 3406.48)
[Sat Oct  1 16:58:47 2011] chipx,y range = (323.00-357.00, 631.00-669.00)
[Sat Oct  1 16:58:48 2011] Size of ../../acisf10966/products/events/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 18 counts
[Sat Oct  1 16:58:48 2011] ../../acisf10966/products/images/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src17_src.img and ../../acisf10966/products/images/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Sat Oct  1 16:58:48 2011] ../../acisf10966/products/spectra/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src17_src.pi and ../../acisf10966/products/spectra/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src17_bgd.pi exist, delete to re-create
[Sat Oct  1 16:58:48 2011] Not generating rmf since there are only 19 counts
[Sat Oct  1 16:58:51 2011] ../../acisf10966/products/lightcurves/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src17_src.lc and ../../acisf10966/products/lightcurves/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Sat Oct  1 17:00:32 2011] 178.059
[Sat Oct  1 17:00:40 2011] Updating aperture counts using extracted products
[Sat Oct  1 17:00:40 2011] Error reading totcts from fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src17_src.pi.gz
[Sat Oct  1 17:00:41 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 17:00:41 2011] Using photon index=1.80, rate=0.000661, arf fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src17.arf
[Sat Oct  1 17:00:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 17:00:41 2011] Updating source flux to 1.1e-14
[Sat Oct  1 17:01:00 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting