[Sat Oct  1 16:50:34 2011] Detection parameters:
  Position = (250.4, 737.2) = 20 34 29.58 41 32 44.0
  Extent = 0.5" x 0.5", rotation angle = 102 degrees
  Source counts = 23.3 +/- 4.9
  Background counts = 0.7
  Rate = 0.0008 +/- 0.0002

[Sat Oct  1 16:50:37 2011] Off-axis axis estimate = 1.78'
[Sat Oct  1 16:52:14 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 16:52:14 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sat Oct  1 16:52:14 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.264
[Sat Oct  1 16:52:14 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.41"
[Sat Oct  1 16:52:16 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src15.ximg exists
[Sat Oct  1 16:52:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src15.csv
[Sat Oct  1 16:52:16 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src15_1.ximg exists
[Sat Oct  1 16:52:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src15.csv
[Sat Oct  1 16:52:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10966_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 16:52:20 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Sat Oct  1 16:52:20 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Oct  1 16:52:20 2011] Fit fullrun_ccd3_acisf10966_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Sat Oct  1 16:52:42 2011] Spatial fit model total counts = 26.329300, observed total counts = 26.000000
[Sat Oct  1 16:52:42 2011] Offset between fit and detection position for source 10 = 0.744673 pixels
[Sat Oct  1 16:52:42 2011] 25.843390 total counts/ 2.756590 bgd. counts: snr = 13.905213
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.744673 pixels
  Position = (250.9, 737.8) = 20 34 29.58 41 32 44.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 23.1 +/- 5.1
  Background counts = 2.8
  Rate = 0.0008 +/- 0.0002
[Sat Oct  1 16:52:42 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 16:52:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 16:52:42 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 16:52:42 2011] Source does appear to be extended
[Sat Oct  1 16:52:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 16:53:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 16:53:23 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Sat Oct  1 16:53:23 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.575
[Sat Oct  1 16:53:23 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.40"
[Sat Oct  1 16:53:24 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src15.ximg exists
[Sat Oct  1 16:53:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src15.csv
[Sat Oct  1 16:53:25 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src15_1.ximg exists
[Sat Oct  1 16:53:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src15.csv
[Sat Oct  1 16:53:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10966_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 16:53:32 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Sat Oct  1 16:53:32 2011] fullrun_ccd3_acisf10966_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Oct  1 16:53:32 2011] Fit fullrun_ccd3_acisf10966_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Oct  1 16:53:54 2011] Spatial fit model total counts = 25.060600, observed total counts = 26.000000
[Sat Oct  1 16:53:54 2011] Offset between fit and detection position for source 10 = 0.007302 pixels
[Sat Oct  1 16:53:54 2011] 24.118248 total counts/ 0.864548 bgd. counts: snr = 25.009068
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.007302 pixels
  Position = (250.9, 737.8) = 20 34 29.58 41 32 44.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 23.3 +/- 4.9
  Background counts = 0.9
  Rate = 0.0008 +/- 0.0002
[Sat Oct  1 16:53:54 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 16:53:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 16:53:54 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 16:53:54 2011] Source does appear to be extended
[Sat Oct  1 16:53:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 16:57:49 2011] Not overwriting source region fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src10_src.reg
[Sat Oct  1 16:57:49 2011] Extracting stamp from image fullrun_ccd3_acisf10966_pi14-548_cl_sm2.00.img.gz, (232, 719) - (270, 757)
[Sat Oct  1 16:57:49 2011] Writing fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src10.gif
[Sat Oct  1 16:58:37 2011] ../../acisf10966/products/events/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src10_src.evt and ../../acisf10966/products/events/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sat Oct  1 16:58:37 2011] Size of ../../acisf10966/products/events/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src10_src.evt.gz[events] = 24 counts
[Sat Oct  1 16:58:37 2011] Mean chipx,y = (762.38, 909.17)
[Sat Oct  1 16:58:37 2011] Mean tdetx,y = (4222.83, 3823.38)
[Sat Oct  1 16:58:37 2011] chipx,y range = (749.00-783.00, 893.00-925.00)
[Sat Oct  1 16:58:37 2011] Size of ../../acisf10966/products/events/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 8 counts
[Sat Oct  1 16:58:37 2011] ../../acisf10966/products/images/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src10_src.img and ../../acisf10966/products/images/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Sat Oct  1 16:58:37 2011] ../../acisf10966/products/spectra/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src10_src.pi and ../../acisf10966/products/spectra/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sat Oct  1 16:58:37 2011] Not generating rmf since there are only 23 counts
[Sat Oct  1 16:58:40 2011] ../../acisf10966/products/lightcurves/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src10_src.lc and ../../acisf10966/products/lightcurves/fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sat Oct  1 17:00:31 2011] 190.799
[Sat Oct  1 17:00:40 2011] Updating aperture counts using extracted products
[Sat Oct  1 17:00:40 2011] Error reading totcts from fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src10_src.pi.gz
[Sat Oct  1 17:00:41 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 17:00:41 2011] Using photon index=1.80, rate=0.000797, arf fullrun_ccd3_acisf10966_pi14-548_pass1_cl_src10.arf
[Sat Oct  1 17:00:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 17:00:41 2011] Updating source flux to 1.3e-14
[Sat Oct  1 17:01:00 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting