[Sat Oct  1 16:50:30 2011] Detection parameters:
  Position = (412.3, 570.5) = 20 34 58.75 41 36 17.6
  Extent = 0.8" x 0.6", rotation angle = 167 degrees
  Source counts = 120.1 +/- 11.2
  Background counts = 4.9
  Rate = 0.004 +/- 0.0004

[Sat Oct  1 16:50:32 2011] Off-axis axis estimate = 5.64'
[Sat Oct  1 16:52:11 2011] Using EEF radius (= 1.46 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 16:52:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 16:52:11 2011] Initial guess for spatial extent in simple fitting = 1.46"
[Sat Oct  1 16:52:11 2011] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.024
[Sat Oct  1 16:52:11 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.46"
[Sat Oct  1 16:52:13 2011] fullrun_ccd2_acisf10966_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct  1 16:52:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10966_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 16:52:13 2011] fullrun_ccd2_acisf10966_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct  1 16:52:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10966_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 16:52:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10966_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10966_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 16:52:13 2011] fullrun_ccd2_acisf10966_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  1 16:52:13 2011] fullrun_ccd2_acisf10966_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  1 16:52:13 2011] Fit fullrun_ccd2_acisf10966_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  1 16:52:38 2011] Spatial fit model total counts = 138.813000, observed total counts = 136.000000
[Sat Oct  1 16:52:38 2011] Offset between fit and detection position for source 2 = 0.905191 pixels
[Sat Oct  1 16:52:38 2011] 137.612900 total counts/ 14.894900 bgd. counts: snr = 31.797244
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.905191 pixels
  Position = (413.1, 570.9) = 20 34 58.74 41 36 17.5
  Extent = 1.4 (1.2-1.6)", rotation angle = 0
  Source counts = 122.7 +/- 11.7
  Background counts = 14.9
  Rate = 0.004 +/- 0.0004
[Sat Oct  1 16:52:38 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 16:52:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 16:52:38 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 16:52:38 2011] Source does appear to be extended
[Sat Oct  1 16:52:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 16:53:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 16:53:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 16:53:22 2011] Initial guess for spatial extent in simple fitting = 1.37"
[Sat Oct  1 16:53:22 2011] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.836
[Sat Oct  1 16:53:22 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.37"
[Sat Oct  1 16:53:22 2011] fullrun_ccd2_acisf10966_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct  1 16:53:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10966_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 16:53:22 2011] fullrun_ccd2_acisf10966_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct  1 16:53:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10966_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 16:53:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10966_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10966_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 16:53:23 2011] fullrun_ccd2_acisf10966_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  1 16:53:23 2011] fullrun_ccd2_acisf10966_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  1 16:53:23 2011] Fit fullrun_ccd2_acisf10966_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct  1 16:53:50 2011] Spatial fit model total counts = 132.040000, observed total counts = 132.000000
[Sat Oct  1 16:53:50 2011] Offset between fit and detection position for source 2 = 0.071670 pixels
[Sat Oct  1 16:53:50 2011] 131.085610 total counts/ 7.485610 bgd. counts: snr = 45.175698
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.071670 pixels
  Position = (413.1, 570.9) = 20 34 58.74 41 36 17.5
  Extent = 1.4 (1.2-1.6)", rotation angle = 0
  Source counts = 123.6 +/- 11.4
  Background counts = 7.5
  Rate = 0.004 +/- 0.0004
[Sat Oct  1 16:53:50 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 16:53:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 16:53:50 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 16:53:50 2011] Source does appear to be extended
[Sat Oct  1 16:53:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 16:56:22 2011] Not overwriting source region fullrun_ccd2_acisf10966_pi14-548_pass1_cl_src2_src.reg
[Sat Oct  1 16:56:22 2011] Extracting stamp from image fullrun_ccd2_acisf10966_pi14-548_cl_sm2.00.img.gz, (349, 506) - (478, 635)
[Sat Oct  1 16:56:22 2011] Writing fullrun_ccd2_acisf10966_pi14-548_pass1_cl_src2.gif
[Sat Oct  1 16:56:23 2011] ../../acisf10966/products/events/fullrun_ccd2_acisf10966_pi14-548_pass1_cl_src2_src.evt and ../../acisf10966/products/events/fullrun_ccd2_acisf10966_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct  1 16:56:23 2011] Size of ../../acisf10966/products/events/fullrun_ccd2_acisf10966_pi14-548_pass1_cl_src2_src.evt.gz[events] = 130 counts
[Sat Oct  1 16:56:23 2011] Mean chipx,y = (213.58, 367.97)
[Sat Oct  1 16:56:23 2011] Mean tdetx,y = (3428.97, 3872.42)
[Sat Oct  1 16:56:23 2011] chipx,y range = (187.00-233.00, 344.00-395.00)
[Sat Oct  1 16:56:23 2011] Size of ../../acisf10966/products/events/fullrun_ccd2_acisf10966_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 70 counts
[Sat Oct  1 16:56:23 2011] ../../acisf10966/products/images/fullrun_ccd2_acisf10966_pi14-548_pass1_cl_src2_src.img and ../../acisf10966/products/images/fullrun_ccd2_acisf10966_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct  1 16:56:23 2011] ../../acisf10966/products/spectra/fullrun_ccd2_acisf10966_pi14-548_pass1_cl_src2_src.pi and ../../acisf10966/products/spectra/fullrun_ccd2_acisf10966_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Oct  1 16:56:26 2011] ../../acisf10966/products/lightcurves/fullrun_ccd2_acisf10966_pi14-548_pass1_cl_src2_src.lc and ../../acisf10966/products/lightcurves/fullrun_ccd2_acisf10966_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct  1 16:57:47 2011] Keeping rmf generated by specextract
[Sat Oct  1 16:57:48 2011] 169.266
[Sat Oct  1 17:00:40 2011] Updating aperture counts using extracted products
[Sat Oct  1 17:00:40 2011] Error reading totcts from fullrun_ccd2_acisf10966_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct  1 17:00:40 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 17:00:40 2011] Using photon index=1.80, rate=0.00424, arf fullrun_ccd2_acisf10966_pi14-548_pass1_cl_src2.arf
[Sat Oct  1 17:00:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 17:00:40 2011] Updating source flux to 7.3e-14
[Sat Oct  1 17:01:00 2011] Reading fit data from acisf10966/analysis//spectral/fullrun_ccd2_acisf10966_pi14-548_pass1_cl_src2_pl.csv
[Sat Oct  1 17:01:00 2011] Spectral fit parameter nH value = 8.1545e+20
[Sat Oct  1 17:01:00 2011] Spectral fit parameter PhoIndex value = 1.88898
[Sat Oct  1 17:01:00 2011] Failed to get F(0.3-8.0) from acisf10966/analysis//spectral/fullrun_ccd2_acisf10966_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Oct  1 17:01:00 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 17:01:00 2011] Using Nh = 8.2e+20, photon index=1.89, rate=0.00424, arf fullrun_ccd2_acisf10966_pi14-548_pass1_cl_src2.arf
[Sat Oct  1 17:01:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 17:01:00 2011] Updating source flux to 5.5e-14