[Mon Oct 24 17:48:23 2011] Detection parameters:
  Position = (275.6, 576.9) = 20 34 8.87 41 39 33.9
  Extent = 0.5" x 0.5", rotation angle = 149 degrees
  Source counts = 46.1 +/- 6.9
  Background counts = 0.9
  Rate = 0.002 +/- 0.0002

[Mon Oct 24 17:48:24 2011] Off-axis axis estimate = 1.99'
[Mon Oct 24 17:49:24 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 17:49:24 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Mon Oct 24 17:49:24 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.796
[Mon Oct 24 17:49:24 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.43"
[Mon Oct 24 17:49:25 2011] fullrun_ccd3_acisf10965_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 24 17:49:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10965_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 17:49:25 2011] fullrun_ccd3_acisf10965_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 24 17:49:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10965_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 17:49:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10965_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10965_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 17:49:25 2011] fullrun_ccd3_acisf10965_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 24 17:49:25 2011] fullrun_ccd3_acisf10965_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 24 17:49:25 2011] Fit fullrun_ccd3_acisf10965_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 24 17:49:38 2011] Spatial fit model total counts = 49.018200, observed total counts = 49.000000
[Mon Oct 24 17:49:38 2011] Offset between fit and detection position for source 2 = 0.789933 pixels
[Mon Oct 24 17:49:38 2011] 48.792130 total counts/ 4.643230 bgd. counts: snr = 20.488482
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.789933 pixels
  Position = (276.3, 577.4) = 20 34 8.87 41 39 33.9
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 44.1 +/- 7.0
  Background counts = 4.6
  Rate = 0.001 +/- 0.0002
[Mon Oct 24 17:49:38 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 17:49:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 17:49:38 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 17:49:38 2011] Source does appear to be extended
[Mon Oct 24 17:49:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 17:50:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 17:50:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 17:50:06 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Mon Oct 24 17:50:06 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.897
[Mon Oct 24 17:50:06 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.53"
[Mon Oct 24 17:50:07 2011] fullrun_ccd3_acisf10965_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 24 17:50:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10965_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 17:50:07 2011] fullrun_ccd3_acisf10965_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 24 17:50:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10965_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 17:50:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10965_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10965_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 17:50:07 2011] fullrun_ccd3_acisf10965_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 24 17:50:07 2011] fullrun_ccd3_acisf10965_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 24 17:50:07 2011] Fit fullrun_ccd3_acisf10965_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 24 17:50:22 2011] Spatial fit model total counts = 48.912700, observed total counts = 49.000000
[Mon Oct 24 17:50:22 2011] Offset between fit and detection position for source 2 = 0.009818 pixels
[Mon Oct 24 17:50:22 2011] 48.705730 total counts/ 4.613530 bgd. counts: snr = 20.527927
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.009818 pixels
  Position = (276.3, 577.4) = 20 34 8.87 41 39 33.9
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 44.1 +/- 7.0
  Background counts = 4.6
  Rate = 0.001 +/- 0.0002
[Mon Oct 24 17:50:22 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 17:50:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 17:50:22 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 17:50:22 2011] Source does appear to be extended
[Mon Oct 24 17:50:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 17:54:19 2011] Not overwriting source region fullrun_ccd3_acisf10965_pi14-548_pass1_cl_src2_src.reg
[Mon Oct 24 17:54:19 2011] Extracting stamp from image fullrun_ccd3_acisf10965_pi14-548_cl_sm2.00.img.gz, (252, 553) - (301, 602)
[Mon Oct 24 17:54:19 2011] Writing fullrun_ccd3_acisf10965_pi14-548_pass1_cl_src2.gif
[Mon Oct 24 17:54:20 2011] ../../acisf10965/products/events/fullrun_ccd3_acisf10965_pi14-548_pass1_cl_src2_src.evt and ../../acisf10965/products/events/fullrun_ccd3_acisf10965_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Oct 24 17:54:20 2011] Size of ../../acisf10965/products/events/fullrun_ccd3_acisf10965_pi14-548_pass1_cl_src2_src.evt.gz[events] = 45 counts
[Mon Oct 24 17:54:20 2011] Mean chipx,y = (795.96, 832.09)
[Mon Oct 24 17:54:20 2011] Mean tdetx,y = (4299.91, 3856.96)
[Mon Oct 24 17:54:20 2011] chipx,y range = (778.00-812.00, 814.00-846.00)
[Mon Oct 24 17:54:20 2011] Size of ../../acisf10965/products/events/fullrun_ccd3_acisf10965_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 7 counts
[Mon Oct 24 17:54:20 2011] ../../acisf10965/products/images/fullrun_ccd3_acisf10965_pi14-548_pass1_cl_src2_src.img and ../../acisf10965/products/images/fullrun_ccd3_acisf10965_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Oct 24 17:54:20 2011] ../../acisf10965/products/spectra/fullrun_ccd3_acisf10965_pi14-548_pass1_cl_src2_src.pi and ../../acisf10965/products/spectra/fullrun_ccd3_acisf10965_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Oct 24 17:54:20 2011] Not generating rmf since there are only 44 counts
[Mon Oct 24 17:54:23 2011] ../../acisf10965/products/lightcurves/fullrun_ccd3_acisf10965_pi14-548_pass1_cl_src2_src.lc and ../../acisf10965/products/lightcurves/fullrun_ccd3_acisf10965_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Oct 24 17:55:26 2011] 199.206
[Mon Oct 24 17:55:35 2011] Updating aperture counts using extracted products
[Mon Oct 24 17:55:35 2011] Error reading totcts from fullrun_ccd3_acisf10965_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Oct 24 17:55:35 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 17:55:35 2011] Using photon index=1.80, rate=0.00149, arf fullrun_ccd3_acisf10965_pi14-548_pass1_cl_src2.arf
[Mon Oct 24 17:55:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 17:55:35 2011] Updating source flux to 2.3e-14
[Mon Oct 24 17:56:04 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 24 17:56:05 2011] acisf10965/analysis//spectral/fullrun_ccd3_acisf10965_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete