[Mon Oct 24 17:48:21 2011] Detection parameters:
  Position = (90.5, 643.5) = 20 34 57.92 41 43 56.1
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 128.2 +/- 12.2
  Background counts = 21.8
  Rate = 0.004 +/- 0.0004

[Mon Oct 24 17:48:22 2011] Off-axis axis estimate = 8.63'
[Mon Oct 24 17:49:23 2011] Using EEF radius (= 3.29 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 17:49:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 17:49:23 2011] Initial guess for spatial extent in simple fitting = 3.29"
[Mon Oct 24 17:49:23 2011] source mask rpix=6.7, npix_max = 206, mask sum = 107, frac = 0.518
[Mon Oct 24 17:49:23 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.29"
[Mon Oct 24 17:49:24 2011] fullrun_ccd2_acisf10965_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 24 17:49:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10965_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 17:49:24 2011] fullrun_ccd2_acisf10965_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 24 17:49:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10965_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 17:49:24 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10965_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10965_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 17:49:24 2011] fullrun_ccd2_acisf10965_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 24 17:49:24 2011] fullrun_ccd2_acisf10965_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 24 17:49:24 2011] Fit fullrun_ccd2_acisf10965_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 24 17:49:36 2011] Spatial fit model total counts = 278.672000, observed total counts = 288.000000
[Mon Oct 24 17:49:36 2011] Offset between fit and detection position for source 1 = 5.490637 pixels
[Mon Oct 24 17:49:36 2011] 277.845400 total counts/ 44.298400 bgd. counts: snr = 35.089750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 5.490637 pixels
  Position = (95.9, 642.5) = 20 34 57.70 41 43 55.3
  Extent = 3.2 (2.5-3.8)", rotation angle = 0
  Source counts = 233.5 +/- 16.7
  Background counts = 44.3
  Rate = 0.008 +/- 0.0006
[Mon Oct 24 17:49:36 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 17:49:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 17:49:36 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 17:49:36 2011] Source does appear to be extended
[Mon Oct 24 17:49:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 17:50:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 17:50:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 17:50:05 2011] Initial guess for spatial extent in simple fitting = 3.16"
[Mon Oct 24 17:50:05 2011] source mask rpix=6.4, npix_max = 191, mask sum = 159, frac = 0.830
[Mon Oct 24 17:50:05 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.16"
[Mon Oct 24 17:50:06 2011] fullrun_ccd2_acisf10965_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 24 17:50:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10965_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 17:50:06 2011] fullrun_ccd2_acisf10965_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 24 17:50:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10965_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 17:50:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10965_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10965_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 17:50:06 2011] fullrun_ccd2_acisf10965_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 24 17:50:06 2011] fullrun_ccd2_acisf10965_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 24 17:50:06 2011] Fit fullrun_ccd2_acisf10965_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 24 17:50:19 2011] Spatial fit model total counts = 296.933000, observed total counts = 294.000000
[Mon Oct 24 17:50:19 2011] Offset between fit and detection position for source 1 = 0.480393 pixels
[Mon Oct 24 17:50:19 2011] 296.356800 total counts/ 86.390800 bgd. counts: snr = 22.589948
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.480393 pixels
  Position = (96.1, 642.1) = 20 34 57.69 41 43 55.1
  Extent = 2.9 (2.3-3.6)", rotation angle = 0
  Source counts = 210.0 +/- 17.2
  Background counts = 86.4
  Rate = 0.007 +/- 0.0006
[Mon Oct 24 17:50:19 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 17:50:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 17:50:19 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 17:50:19 2011] Source does appear to be extended
[Mon Oct 24 17:50:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 17:53:33 2011] Not overwriting source region fullrun_ccd2_acisf10965_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 24 17:53:33 2011] Extracting stamp from image fullrun_ccd2_acisf10965_pi14-548_cl_sm2.00.img.gz, (0, 508) - (230, 776)
[Mon Oct 24 17:53:33 2011] Writing fullrun_ccd2_acisf10965_pi14-548_pass1_cl_src1.gif
[Mon Oct 24 17:53:34 2011] ../../acisf10965/products/events/fullrun_ccd2_acisf10965_pi14-548_pass1_cl_src1_src.evt and ../../acisf10965/products/events/fullrun_ccd2_acisf10965_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 24 17:53:34 2011] Size of ../../acisf10965/products/events/fullrun_ccd2_acisf10965_pi14-548_pass1_cl_src1_src.evt.gz[events] = 287 counts
[Mon Oct 24 17:53:34 2011] Mean chipx,y = (188.36, 17.64)
[Mon Oct 24 17:53:34 2011] Mean tdetx,y = (3078.64, 3897.64)
[Mon Oct 24 17:53:34 2011] chipx,y range = (158.00-222.00, 5.00-44.00)
[Mon Oct 24 17:53:34 2011] Size of ../../acisf10965/products/events/fullrun_ccd2_acisf10965_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 104 counts
[Mon Oct 24 17:53:34 2011] ../../acisf10965/products/images/fullrun_ccd2_acisf10965_pi14-548_pass1_cl_src1_src.img and ../../acisf10965/products/images/fullrun_ccd2_acisf10965_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 24 17:53:34 2011] ../../acisf10965/products/spectra/fullrun_ccd2_acisf10965_pi14-548_pass1_cl_src1_src.pi and ../../acisf10965/products/spectra/fullrun_ccd2_acisf10965_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 24 17:53:36 2011] ../../acisf10965/products/lightcurves/fullrun_ccd2_acisf10965_pi14-548_pass1_cl_src1_src.lc and ../../acisf10965/products/lightcurves/fullrun_ccd2_acisf10965_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 24 17:54:18 2011] Keeping rmf generated by specextract
[Mon Oct 24 17:54:18 2011] 94.2056
[Mon Oct 24 17:55:34 2011] Updating aperture counts using extracted products
[Mon Oct 24 17:55:34 2011] Error reading totcts from fullrun_ccd2_acisf10965_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 24 17:55:34 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 17:55:34 2011] Using photon index=1.80, rate=0.00708, arf fullrun_ccd2_acisf10965_pi14-548_pass1_cl_src1.arf
[Mon Oct 24 17:55:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 17:55:35 2011] Updating source flux to 2.2e-13
[Mon Oct 24 17:56:04 2011] Reading fit data from acisf10965/analysis//spectral/fullrun_ccd2_acisf10965_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 24 17:56:04 2011] Spectral fit parameter nH value = 2.19659e+22
[Mon Oct 24 17:56:04 2011] Spectral fit parameter PhoIndex value = 3.30965
[Mon Oct 24 17:56:04 2011] Failed to get F(0.3-8.0) from acisf10965/analysis//spectral/fullrun_ccd2_acisf10965_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 24 17:56:04 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 17:56:04 2011] Using Nh = 2.2e+22, photon index=3.31, rate=0.00708, arf fullrun_ccd2_acisf10965_pi14-548_pass1_cl_src1.arf
[Mon Oct 24 17:56:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 17:56:04 2011] Updating source flux to 1.7e-13