[Mon Oct 24 17:48:18 2011] Detection parameters:
  Position = (753.3, 865.4) = 20 34 9.52 41 34 14.4
  Extent = 1.0" x 0.6", rotation angle = 73 degrees
  Source counts = 120.2 +/- 11.1
  Background counts = 2.8
  Rate = 0.004 +/- 0.0004

[Mon Oct 24 17:48:21 2011] Off-axis axis estimate = 5.27'
[Mon Oct 24 17:49:21 2011] Using EEF radius (= 1.29 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 17:49:21 2011] Initial guess for spatial extent in simple fitting = 1.29"
[Mon Oct 24 17:49:21 2011] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.074
[Mon Oct 24 17:49:21 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.29"
[Mon Oct 24 17:49:22 2011] fullrun_ccd1_acisf10965_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 24 17:49:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10965_pi14-548_cl_pass0_src3.csv
[Mon Oct 24 17:49:22 2011] fullrun_ccd1_acisf10965_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 24 17:49:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10965_pi14-548_cl_pass0_src3.csv
[Mon Oct 24 17:49:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10965_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10965_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 17:49:23 2011] fullrun_ccd1_acisf10965_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 24 17:49:23 2011] fullrun_ccd1_acisf10965_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 24 17:49:23 2011] Fit fullrun_ccd1_acisf10965_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Oct 24 17:49:35 2011] Spatial fit model total counts = 124.530000, observed total counts = 126.000000
[Mon Oct 24 17:49:35 2011] Offset between fit and detection position for source 2 = 0.523044 pixels
[Mon Oct 24 17:49:35 2011] 125.220500 total counts/ 19.370500 bgd. counts: snr = 24.050297
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.523044 pixels
  Position = (753.6, 865.8) = 20 34 9.52 41 34 14.3
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 105.8 +/- 11.2
  Background counts = 19.4
  Rate = 0.004 +/- 0.0004
[Mon Oct 24 17:49:35 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 17:49:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 17:49:35 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 17:49:35 2011] Source does appear to be extended
[Mon Oct 24 17:49:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 17:50:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 17:50:01 2011] Initial guess for spatial extent in simple fitting = 0.91"
[Mon Oct 24 17:50:01 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.125
[Mon Oct 24 17:50:01 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.91"
[Mon Oct 24 17:50:03 2011] fullrun_ccd1_acisf10965_pi14-548_cl_pass1_src3.ximg exists
[Mon Oct 24 17:50:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10965_pi14-548_cl_pass1_src3.csv
[Mon Oct 24 17:50:03 2011] fullrun_ccd1_acisf10965_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Oct 24 17:50:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10965_pi14-548_cl_pass1_src3.csv
[Mon Oct 24 17:50:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10965_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10965_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 17:50:05 2011] fullrun_ccd1_acisf10965_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Oct 24 17:50:05 2011] fullrun_ccd1_acisf10965_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Oct 24 17:50:05 2011] Fit fullrun_ccd1_acisf10965_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Oct 24 17:50:17 2011] Spatial fit model total counts = 123.503000, observed total counts = 126.000000
[Mon Oct 24 17:50:17 2011] Offset between fit and detection position for source 2 = 0.030822 pixels
[Mon Oct 24 17:50:17 2011] 124.363400 total counts/ 15.639400 bgd. counts: snr = 27.492572
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.030822 pixels
  Position = (753.6, 865.8) = 20 34 9.52 41 34 14.3
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 108.7 +/- 11.2
  Background counts = 15.6
  Rate = 0.004 +/- 0.0004
[Mon Oct 24 17:50:17 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 17:50:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 17:50:17 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 17:50:17 2011] Source does appear to be extended
[Mon Oct 24 17:50:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 17:51:46 2011] Not overwriting source region fullrun_ccd1_acisf10965_pi14-548_pass1_cl_src2_src.reg
[Mon Oct 24 17:51:46 2011] Extracting stamp from image fullrun_ccd1_acisf10965_pi14-548_cl_sm2.00.img.gz, (711, 823) - (797, 909)
[Mon Oct 24 17:51:46 2011] Writing fullrun_ccd1_acisf10965_pi14-548_pass1_cl_src2.gif
[Mon Oct 24 17:51:55 2011] ../../acisf10965/products/events/fullrun_ccd1_acisf10965_pi14-548_pass1_cl_src2_src.evt and ../../acisf10965/products/events/fullrun_ccd1_acisf10965_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Oct 24 17:51:55 2011] Size of ../../acisf10965/products/events/fullrun_ccd1_acisf10965_pi14-548_pass1_cl_src2_src.evt.gz[events] = 123 counts
[Mon Oct 24 17:51:55 2011] Mean chipx,y = (333.51, 542.74)
[Mon Oct 24 17:51:55 2011] Mean tdetx,y = (4589.26, 4440.51)
[Mon Oct 24 17:51:55 2011] chipx,y range = (314.00-353.00, 524.00-561.00)
[Mon Oct 24 17:51:55 2011] Size of ../../acisf10965/products/events/fullrun_ccd1_acisf10965_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 19 counts
[Mon Oct 24 17:51:55 2011] ../../acisf10965/products/images/fullrun_ccd1_acisf10965_pi14-548_pass1_cl_src2_src.img and ../../acisf10965/products/images/fullrun_ccd1_acisf10965_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Oct 24 17:51:55 2011] ../../acisf10965/products/spectra/fullrun_ccd1_acisf10965_pi14-548_pass1_cl_src2_src.pi and ../../acisf10965/products/spectra/fullrun_ccd1_acisf10965_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Oct 24 17:51:57 2011] ../../acisf10965/products/lightcurves/fullrun_ccd1_acisf10965_pi14-548_pass1_cl_src2_src.lc and ../../acisf10965/products/lightcurves/fullrun_ccd1_acisf10965_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Oct 24 17:53:31 2011] Keeping rmf generated by specextract
[Mon Oct 24 17:53:32 2011] 185.753
[Mon Oct 24 17:55:34 2011] Updating aperture counts using extracted products
[Mon Oct 24 17:55:34 2011] Error reading totcts from fullrun_ccd1_acisf10965_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Oct 24 17:55:34 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 17:55:34 2011] Using photon index=1.80, rate=0.00367, arf fullrun_ccd1_acisf10965_pi14-548_pass1_cl_src2.arf
[Mon Oct 24 17:55:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 17:55:34 2011] Updating source flux to 5.9e-14