[Sun Oct 23 04:49:35 2011] Detection parameters:
  Position = (165.9, 541.9) = 20 32 40.88 41 3 9.9
  Extent = 0.9" x 0.6", rotation angle = 138 degrees
  Source counts = 15.3 +/- 4.5
  Background counts = 4.7
  Rate = 0.0005 +/- 0.0002

[Sun Oct 23 04:49:37 2011] Off-axis axis estimate = 1.00'
[Sun Oct 23 04:51:54 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:51:54 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Oct 23 04:51:54 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.618
[Sun Oct 23 04:51:54 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.38"
[Sun Oct 23 04:51:56 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass0_src18.ximg exists
[Sun Oct 23 04:51:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10964_pi14-548_cl_pass0_src18.csv
[Sun Oct 23 04:51:56 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass0_src18_1.ximg exists
[Sun Oct 23 04:51:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10964_pi14-548_cl_pass0_src18.csv
[Sun Oct 23 04:51:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10964_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10964_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:51:58 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Sun Oct 23 04:51:58 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Oct 23 04:51:58 2011] Fit fullrun_ccd3_acisf10964_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Sun Oct 23 04:52:31 2011] Spatial fit model total counts = 32.995300, observed total counts = 33.000000
[Sun Oct 23 04:52:31 2011] Offset between fit and detection position for source 9 = 1.129521 pixels
[Sun Oct 23 04:52:31 2011] 32.323000 total counts/ 21.525800 bgd. counts: snr = 2.327188
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.129521 pixels
  Position = (166.3, 542.9) = 20 32 40.88 41 3 10.1
  Extent = 0.4 (0.1-0.7)", rotation angle = 0
  Source counts = 10.8 +/- 5.7
  Background counts = 21.5
  Rate = 0.0004 +/- 0.0002
[Sun Oct 23 04:52:31 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 04:52:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 04:52:31 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 04:52:31 2011] Source does appear to be extended
[Sun Oct 23 04:52:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 04:53:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:53:11 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sun Oct 23 04:53:11 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.818
[Sun Oct 23 04:53:11 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.42"
[Sun Oct 23 04:53:12 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass1_src18.ximg exists
[Sun Oct 23 04:53:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10964_pi14-548_cl_pass1_src18.csv
[Sun Oct 23 04:53:12 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass1_src18_1.ximg exists
[Sun Oct 23 04:53:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10964_pi14-548_cl_pass1_src18.csv
[Sun Oct 23 04:53:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10964_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10964_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:53:13 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Sun Oct 23 04:53:13 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Oct 23 04:53:13 2011] Fit fullrun_ccd3_acisf10964_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Sun Oct 23 04:53:42 2011] Spatial fit model total counts = 31.996000, observed total counts = 32.000000
[Sun Oct 23 04:53:42 2011] Offset between fit and detection position for source 9 = 0.024084 pixels
[Sun Oct 23 04:53:42 2011] 31.169200 total counts/ 20.259100 bgd. counts: snr = 2.423922
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.024084 pixels
  Position = (166.3, 542.9) = 20 32 40.88 41 3 10.1
  Extent = 0.4 (0.1-0.7)", rotation angle = 0
  Source counts = 10.9 +/- 5.6
  Background counts = 20.3
  Rate = 0.0004 +/- 0.0002
[Sun Oct 23 04:53:42 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 04:53:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 04:53:42 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 04:53:42 2011] Source does appear to be extended
[Sun Oct 23 04:53:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 05:01:37 2011] Not overwriting source region fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src9_src.reg
[Sun Oct 23 05:01:37 2011] Extracting stamp from image fullrun_ccd3_acisf10964_pi14-548_cl_sm2.00.img.gz, (147, 523) - (186, 563)
[Sun Oct 23 05:01:37 2011] Writing fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src9.gif
[Sun Oct 23 05:02:33 2011] ../../acisf10964/products/events/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src9_src.evt and ../../acisf10964/products/events/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sun Oct 23 05:02:33 2011] Size of ../../acisf10964/products/events/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src9_src.evt.gz[events] = 14 counts
[Sun Oct 23 05:02:33 2011] Mean chipx,y = (894.71, 915.07)
[Sun Oct 23 05:02:33 2011] Mean tdetx,y = (4216.93, 3955.71)
[Sun Oct 23 05:02:33 2011] chipx,y range = (880.00-914.00, 895.00-930.00)
[Sun Oct 23 05:02:33 2011] Size of ../../acisf10964/products/events/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 32 counts
[Sun Oct 23 05:02:33 2011] ../../acisf10964/products/images/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src9_src.img and ../../acisf10964/products/images/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Sun Oct 23 05:02:33 2011] ../../acisf10964/products/spectra/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src9_src.pi and ../../acisf10964/products/spectra/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sun Oct 23 05:02:33 2011] Not generating rmf since there are only 10 counts
[Sun Oct 23 05:02:36 2011] ../../acisf10964/products/lightcurves/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src9_src.lc and ../../acisf10964/products/lightcurves/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sun Oct 23 05:03:05 2011] 201.472
[Sun Oct 23 05:03:24 2011] Updating aperture counts using extracted products
[Sun Oct 23 05:03:24 2011] Error reading totcts from fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src9_src.pi.gz
[Sun Oct 23 05:03:24 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 05:03:24 2011] Using photon index=1.80, rate=0.000368, arf fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src9.arf
[Sun Oct 23 05:03:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 05:03:24 2011] Updating source flux to 5.6e-15
[Sun Oct 23 05:10:43 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 23 05:10:44 2011] acisf10964/analysis//spectral/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete