[Sun Oct 23 04:49:37 2011] Detection parameters:
  Position = (519.0, 1228.7) = 20 32 25.49 41 8 47.7
  Extent = 1.9" x 1.4", rotation angle = 157 degrees
  Source counts = 14.5 +/- 4.7
  Background counts = 7.5
  Rate = 0.0005 +/- 0.0002

[Sun Oct 23 04:49:37 2011] Off-axis axis estimate = 6.81'
[Sun Oct 23 04:51:54 2011] Using EEF radius (= 2.07 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:51:54 2011] Initial guess for spatial extent in simple fitting = 2.07"
[Sun Oct 23 04:51:54 2011] source mask rpix=4.2, npix_max = 88, mask sum = 90, frac = 1.016
[Sun Oct 23 04:51:54 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 2.07"
[Sun Oct 23 04:51:56 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass0_src19.ximg exists
[Sun Oct 23 04:51:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10964_pi14-548_cl_pass0_src19.csv
[Sun Oct 23 04:51:56 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass0_src19_1.ximg exists
[Sun Oct 23 04:51:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10964_pi14-548_cl_pass0_src19.csv
[Sun Oct 23 04:51:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10964_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10964_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:51:58 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Sun Oct 23 04:51:58 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Oct 23 04:51:58 2011] Fit fullrun_ccd3_acisf10964_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Sun Oct 23 04:52:31 2011] Spatial fit model total counts = 24.981700, observed total counts = 25.000000
[Sun Oct 23 04:52:31 2011] Offset between fit and detection position for source 30 = 0.793533 pixels
[Sun Oct 23 04:52:31 2011] 25.026650 total counts/ 8.471550 bgd. counts: snr = 5.687879
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.793533 pixels
  Position = (518.7, 1229.4) = 20 32 25.53 41 8 47.8
  Extent = 2.1 (1.2-2.9)", rotation angle = 0
  Source counts = 16.6 +/- 5.0
  Background counts = 8.5
  Rate = 0.0006 +/- 0.0002
[Sun Oct 23 04:52:31 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 04:52:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 04:52:31 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 04:52:31 2011] Source does appear to be extended
[Sun Oct 23 04:52:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 04:53:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:53:11 2011] Initial guess for spatial extent in simple fitting = 2.11"
[Sun Oct 23 04:53:11 2011] source mask rpix=4.3, npix_max = 91, mask sum = 81, frac = 0.884
[Sun Oct 23 04:53:11 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 2.11"
[Sun Oct 23 04:53:12 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass1_src19.ximg exists
[Sun Oct 23 04:53:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10964_pi14-548_cl_pass1_src19.csv
[Sun Oct 23 04:53:12 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass1_src19_1.ximg exists
[Sun Oct 23 04:53:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10964_pi14-548_cl_pass1_src19.csv
[Sun Oct 23 04:53:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10964_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10964_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:53:13 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Sun Oct 23 04:53:13 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Oct 23 04:53:13 2011] Fit fullrun_ccd3_acisf10964_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Sun Oct 23 04:53:42 2011] Spatial fit model total counts = 25.999300, observed total counts = 26.000000
[Sun Oct 23 04:53:42 2011] Offset between fit and detection position for source 30 = 0.193452 pixels
[Sun Oct 23 04:53:42 2011] 26.261300 total counts/ 10.768200 bgd. counts: snr = 4.721356
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.193452 pixels
  Position = (518.7, 1229.2) = 20 32 25.52 41 8 47.7
  Extent = 2.0 (1.1-3.9)", rotation angle = 0
  Source counts = 15.5 +/- 5.1
  Background counts = 10.8
  Rate = 0.0005 +/- 0.0002
[Sun Oct 23 04:53:42 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 04:53:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 04:53:42 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 04:53:42 2011] Source does appear to be extended
[Sun Oct 23 04:53:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 05:01:37 2011] Not overwriting source region fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src30_src.reg
[Sun Oct 23 05:01:37 2011] Extracting stamp from image fullrun_ccd3_acisf10964_pi14-548_cl_sm2.00.img.gz, (426, 1137) - (611, 1322)
[Sun Oct 23 05:01:37 2011] Writing fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src30.gif
[Sun Oct 23 05:02:36 2011] ../../acisf10964/products/events/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src30_src.evt and ../../acisf10964/products/events/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Sun Oct 23 05:02:36 2011] Size of ../../acisf10964/products/events/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src30_src.evt.gz[events] = 28 counts
[Sun Oct 23 05:02:36 2011] Mean chipx,y = (121.04, 910.93)
[Sun Oct 23 05:02:36 2011] Mean tdetx,y = (4221.07, 3182.04)
[Sun Oct 23 05:02:36 2011] chipx,y range = (96.00-142.00, 890.00-933.00)
[Sun Oct 23 05:02:36 2011] Size of ../../acisf10964/products/events/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 238 counts
[Sun Oct 23 05:02:36 2011] ../../acisf10964/products/images/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src30_src.img and ../../acisf10964/products/images/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Sun Oct 23 05:02:36 2011] ../../acisf10964/products/spectra/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src30_src.pi and ../../acisf10964/products/spectra/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Sun Oct 23 05:02:36 2011] Not generating rmf since there are only 15 counts
[Sun Oct 23 05:02:39 2011] ../../acisf10964/products/lightcurves/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src30_src.lc and ../../acisf10964/products/lightcurves/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Sun Oct 23 05:03:05 2011] 168.806
[Sun Oct 23 05:03:24 2011] Updating aperture counts using extracted products
[Sun Oct 23 05:03:24 2011] Error reading totcts from fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src30_src.pi.gz
[Sun Oct 23 05:03:24 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 05:03:24 2011] Using photon index=1.80, rate=0.000522, arf fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src30.arf
[Sun Oct 23 05:03:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 05:03:24 2011] Updating source flux to 9.2e-15
[Sun Oct 23 05:10:43 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 23 05:10:44 2011] acisf10964/analysis//spectral/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete