[Sun Oct 23 04:49:36 2011] Detection parameters:
  Position = (353.2, 580.7) = 20 32 32.73 41 3 28.9
  Extent = 0.7" x 0.5", rotation angle = 121 degrees
  Source counts = 14.0 +/- 4.2
  Background counts = 4.0
  Rate = 0.0005 +/- 0.0001

[Sun Oct 23 04:49:37 2011] Off-axis axis estimate = 2.55'
[Sun Oct 23 04:51:54 2011] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:51:54 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Sun Oct 23 04:51:54 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.978
[Sun Oct 23 04:51:54 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.50"
[Sun Oct 23 04:51:56 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass0_src21.ximg exists
[Sun Oct 23 04:51:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10964_pi14-548_cl_pass0_src21.csv
[Sun Oct 23 04:51:56 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass0_src21_1.ximg exists
[Sun Oct 23 04:51:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10964_pi14-548_cl_pass0_src21.csv
[Sun Oct 23 04:51:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10964_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10964_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:51:58 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Sun Oct 23 04:51:58 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Oct 23 04:51:58 2011] Fit fullrun_ccd3_acisf10964_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Oct 23 04:52:31 2011] Spatial fit model total counts = 28.832800, observed total counts = 29.000000
[Sun Oct 23 04:52:31 2011] Offset between fit and detection position for source 10 = 0.702289 pixels
[Sun Oct 23 04:52:31 2011] 27.566300 total counts/ 12.759600 bgd. counts: snr = 4.145145
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.702289 pixels
  Position = (353.9, 580.8) = 20 32 32.72 41 3 28.7
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 14.8 +/- 5.3
  Background counts = 12.8
  Rate = 0.0005 +/- 0.0002
[Sun Oct 23 04:52:31 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 04:52:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 04:52:31 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 04:52:31 2011] Source does appear to be extended
[Sun Oct 23 04:52:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 04:53:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:53:11 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Sun Oct 23 04:53:11 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.265
[Sun Oct 23 04:53:11 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 0.63"
[Sun Oct 23 04:53:12 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass1_src21.ximg exists
[Sun Oct 23 04:53:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10964_pi14-548_cl_pass1_src21.csv
[Sun Oct 23 04:53:12 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass1_src21_1.ximg exists
[Sun Oct 23 04:53:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10964_pi14-548_cl_pass1_src21.csv
[Sun Oct 23 04:53:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10964_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10964_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:53:13 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Sun Oct 23 04:53:13 2011] fullrun_ccd3_acisf10964_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Oct 23 04:53:13 2011] Fit fullrun_ccd3_acisf10964_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Oct 23 04:53:42 2011] Spatial fit model total counts = 31.447000, observed total counts = 31.000000
[Sun Oct 23 04:53:42 2011] Offset between fit and detection position for source 10 = 0.064140 pixels
[Sun Oct 23 04:53:42 2011] 30.629600 total counts/ 16.771300 bgd. counts: snr = 3.383971
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.064140 pixels
  Position = (353.8, 580.7) = 20 32 32.72 41 3 28.7
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 13.9 +/- 5.5
  Background counts = 16.8
  Rate = 0.0005 +/- 0.0002
[Sun Oct 23 04:53:42 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 04:53:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 04:53:42 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 04:53:42 2011] Source does appear to be extended
[Sun Oct 23 04:53:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 05:01:37 2011] Not overwriting source region fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src10_src.reg
[Sun Oct 23 05:01:37 2011] Extracting stamp from image fullrun_ccd3_acisf10964_pi14-548_cl_sm2.00.img.gz, (327, 554) - (381, 608)
[Sun Oct 23 05:01:37 2011] Writing fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src10.gif
[Sun Oct 23 05:02:42 2011] ../../acisf10964/products/events/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src10_src.evt and ../../acisf10964/products/events/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sun Oct 23 05:02:42 2011] Size of ../../acisf10964/products/events/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src10_src.evt.gz[events] = 17 counts
[Sun Oct 23 05:02:42 2011] Mean chipx,y = (773.53, 763.00)
[Sun Oct 23 05:02:42 2011] Mean tdetx,y = (4369.00, 3834.53)
[Sun Oct 23 05:02:42 2011] chipx,y range = (758.00-795.00, 746.00-779.00)
[Sun Oct 23 05:02:42 2011] Size of ../../acisf10964/products/events/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 60 counts
[Sun Oct 23 05:02:42 2011] ../../acisf10964/products/images/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src10_src.img and ../../acisf10964/products/images/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Sun Oct 23 05:02:42 2011] ../../acisf10964/products/spectra/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src10_src.pi and ../../acisf10964/products/spectra/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sun Oct 23 05:02:42 2011] Not generating rmf since there are only 13 counts
[Sun Oct 23 05:02:45 2011] ../../acisf10964/products/lightcurves/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src10_src.lc and ../../acisf10964/products/lightcurves/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sun Oct 23 05:03:05 2011] 189.017
[Sun Oct 23 05:03:24 2011] Updating aperture counts using extracted products
[Sun Oct 23 05:03:24 2011] Error reading totcts from fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src10_src.pi.gz
[Sun Oct 23 05:03:24 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 05:03:24 2011] Using photon index=1.80, rate=0.000467, arf fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src10.arf
[Sun Oct 23 05:03:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 05:03:24 2011] Updating source flux to 7.6e-15
[Sun Oct 23 05:10:43 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 23 05:10:44 2011] acisf10964/analysis//spectral/fullrun_ccd3_acisf10964_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete