[Sun Oct 23 04:49:34 2011] Detection parameters:
  Position = (871.4, 105.6) = 20 32 50.34 41 3 32.4
  Extent = 0.8" x 0.5", rotation angle = 96 degrees
  Source counts = 11.9 +/- 3.9
  Background counts = 3.1
  Rate = 0.0004 +/- 0.0001

[Sun Oct 23 04:49:35 2011] Off-axis axis estimate = 0.85'
[Sun Oct 23 04:51:50 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:51:50 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Oct 23 04:51:50 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.385
[Sun Oct 23 04:51:50 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 0.38"
[Sun Oct 23 04:51:53 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src41.ximg exists
[Sun Oct 23 04:51:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src41.csv
[Sun Oct 23 04:51:53 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src41_1.ximg exists
[Sun Oct 23 04:51:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src41.csv
[Sun Oct 23 04:51:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:51:54 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_tfrozen_src41.ximg exists
[Sun Oct 23 04:51:54 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_tfrozen_src41_1.ximg exists
[Sun Oct 23 04:51:54 2011] Fit fullrun_ccd2_acisf10964_pi14-548_cl_pass0_tfrozen_src41 appears to have run properly
[Sun Oct 23 04:52:28 2011] Spatial fit model total counts = 23.995100, observed total counts = 24.000000
[Sun Oct 23 04:52:28 2011] Offset between fit and detection position for source 72 = 0.814779 pixels
[Sun Oct 23 04:52:28 2011] 23.771200 total counts/ 13.051300 bgd. counts: snr = 2.967316
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.814779 pixels
  Position = (872.2, 105.5) = 20 32 50.32 41 3 32.1
  Extent = 0.5 (0.3-0.9)", rotation angle = 0
  Source counts = 10.7 +/- 4.9
  Background counts = 13.1
  Rate = 0.0004 +/- 0.0002
[Sun Oct 23 04:52:28 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 04:52:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 04:52:28 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 04:52:28 2011] Source does appear to be extended
[Sun Oct 23 04:52:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 04:53:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:53:08 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Sun Oct 23 04:53:08 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.923
[Sun Oct 23 04:53:08 2011] Giving source the simple spatial ID 39 for pass 1, mean size = 0.52"
[Sun Oct 23 04:53:10 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src39.ximg exists
[Sun Oct 23 04:53:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src39.csv
[Sun Oct 23 04:53:10 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src39_1.ximg exists
[Sun Oct 23 04:53:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src39.csv
[Sun Oct 23 04:53:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:53:11 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass1_tfrozen_src39.ximg exists
[Sun Oct 23 04:53:11 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass1_tfrozen_src39_1.ximg exists
[Sun Oct 23 04:53:11 2011] Fit fullrun_ccd2_acisf10964_pi14-548_cl_pass1_tfrozen_src39 appears to have run properly
[Sun Oct 23 04:53:38 2011] Spatial fit model total counts = 23.995700, observed total counts = 24.000000
[Sun Oct 23 04:53:38 2011] Offset between fit and detection position for source 72 = 0.007123 pixels
[Sun Oct 23 04:53:38 2011] 23.871700 total counts/ 13.111100 bgd. counts: snr = 2.971782
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.007123 pixels
  Position = (872.2, 105.5) = 20 32 50.32 41 3 32.1
  Extent = 0.5 (0.3-0.9)", rotation angle = 0
  Source counts = 10.8 +/- 4.9
  Background counts = 13.1
  Rate = 0.0004 +/- 0.0002
[Sun Oct 23 04:53:38 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 04:53:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 04:53:38 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 04:53:38 2011] Source does appear to be extended
[Sun Oct 23 04:53:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 04:58:43 2011] Not overwriting source region fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src72_src.reg
[Sun Oct 23 04:58:43 2011] Extracting stamp from image fullrun_ccd2_acisf10964_pi14-548_cl_sm2.00.img.gz, (848, 82) - (896, 129)
[Sun Oct 23 04:58:43 2011] Writing fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src72.gif
[Sun Oct 23 05:00:38 2011] ../../acisf10964/products/events/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src72_src.evt and ../../acisf10964/products/events/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src72_bgd.evt exist, delete to re-create
[Sun Oct 23 05:00:38 2011] Size of ../../acisf10964/products/events/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src72_src.evt.gz[events] = 13 counts
[Sun Oct 23 05:00:38 2011] Mean chipx,y = (68.23, 945.77)
[Sun Oct 23 05:00:38 2011] Mean tdetx,y = (4006.77, 4017.77)
[Sun Oct 23 05:00:38 2011] chipx,y range = (50.00-84.00, 929.00-961.00)
[Sun Oct 23 05:00:38 2011] Size of ../../acisf10964/products/events/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src72_bgd.evt.gz[events] = 32 counts
[Sun Oct 23 05:00:38 2011] ../../acisf10964/products/images/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src72_src.img and ../../acisf10964/products/images/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src72_bgd.img exist, delete to re-create
[Sun Oct 23 05:00:38 2011] ../../acisf10964/products/spectra/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src72_src.pi and ../../acisf10964/products/spectra/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src72_bgd.pi exist, delete to re-create
[Sun Oct 23 05:00:38 2011] Not generating rmf since there are only 10 counts
[Sun Oct 23 05:00:41 2011] ../../acisf10964/products/lightcurves/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src72_src.lc and ../../acisf10964/products/lightcurves/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src72_bgd.lc exist, delete to re-create
[Sun Oct 23 05:01:35 2011] 202.105
[Sun Oct 23 05:03:22 2011] Updating aperture counts using extracted products
[Sun Oct 23 05:03:22 2011] Error reading totcts from fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src72_src.pi.gz
[Sun Oct 23 05:03:23 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 05:03:23 2011] Using photon index=1.80, rate=0.000363, arf fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src72.arf
[Sun Oct 23 05:03:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 05:03:23 2011] Updating source flux to 5.5e-15
[Sun Oct 23 05:10:35 2011] Source 72 has fewer than 100.000000 counts, skipping spectral fitting