[Sun Oct 23 04:49:32 2011] Detection parameters:
  Position = (712.9, 289.9) = 20 32 57.24 41 5 3.0
  Extent = 0.6" x 0.5", rotation angle = 82 degrees
  Source counts = 12.2 +/- 3.7
  Background counts = 1.8
  Rate = 0.0004 +/- 0.0001

[Sun Oct 23 04:49:35 2011] Off-axis axis estimate = 2.78'
[Sun Oct 23 04:51:50 2011] Using EEF radius (= 0.54 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:51:50 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Sun Oct 23 04:51:50 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.884
[Sun Oct 23 04:51:50 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 0.54"
[Sun Oct 23 04:51:53 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src39.ximg exists
[Sun Oct 23 04:51:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src39.csv
[Sun Oct 23 04:51:53 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src39_1.ximg exists
[Sun Oct 23 04:51:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src39.csv
[Sun Oct 23 04:51:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:51:54 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_tfrozen_src39.ximg exists
[Sun Oct 23 04:51:54 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_tfrozen_src39_1.ximg exists
[Sun Oct 23 04:51:54 2011] Fit fullrun_ccd2_acisf10964_pi14-548_cl_pass0_tfrozen_src39 appears to have run properly
[Sun Oct 23 04:52:28 2011] Spatial fit model total counts = 21.642200, observed total counts = 21.000000
[Sun Oct 23 04:52:28 2011] Offset between fit and detection position for source 38 = 1.079871 pixels
[Sun Oct 23 04:52:28 2011] 21.592970 total counts/ 9.948970 bgd. counts: snr = 3.691587
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 1.079871 pixels
  Position = (713.5, 290.7) = 20 32 57.23 41 5 3.2
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 11.6 +/- 4.6
  Background counts = 9.9
  Rate = 0.0004 +/- 0.0002
[Sun Oct 23 04:52:28 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 04:52:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 04:52:28 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 04:52:28 2011] Source does appear to be extended
[Sun Oct 23 04:52:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 04:53:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:53:08 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Sun Oct 23 04:53:08 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.002
[Sun Oct 23 04:53:08 2011] Giving source the simple spatial ID 37 for pass 1, mean size = 0.49"
[Sun Oct 23 04:53:10 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src37.ximg exists
[Sun Oct 23 04:53:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src37.csv
[Sun Oct 23 04:53:10 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src37_1.ximg exists
[Sun Oct 23 04:53:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src37.csv
[Sun Oct 23 04:53:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:53:11 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass1_tfrozen_src37.ximg exists
[Sun Oct 23 04:53:11 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass1_tfrozen_src37_1.ximg exists
[Sun Oct 23 04:53:11 2011] Fit fullrun_ccd2_acisf10964_pi14-548_cl_pass1_tfrozen_src37 appears to have run properly
[Sun Oct 23 04:53:38 2011] Spatial fit model total counts = 21.639300, observed total counts = 21.000000
[Sun Oct 23 04:53:38 2011] Offset between fit and detection position for source 38 = 0.007161 pixels
[Sun Oct 23 04:53:38 2011] 21.587910 total counts/ 9.996510 bgd. counts: snr = 3.666162
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.007161 pixels
  Position = (713.5, 290.8) = 20 32 57.23 41 5 3.2
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 11.6 +/- 4.6
  Background counts = 10.0
  Rate = 0.0004 +/- 0.0002
[Sun Oct 23 04:53:38 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 04:53:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 04:53:38 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 04:53:38 2011] Source does appear to be extended
[Sun Oct 23 04:53:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 04:58:43 2011] Not overwriting source region fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src38_src.reg
[Sun Oct 23 04:58:43 2011] Extracting stamp from image fullrun_ccd2_acisf10964_pi14-548_cl_sm2.00.img.gz, (691, 269) - (736, 313)
[Sun Oct 23 04:58:43 2011] Writing fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src38.gif
[Sun Oct 23 05:00:32 2011] ../../acisf10964/products/events/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src38_src.evt and ../../acisf10964/products/events/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src38_bgd.evt exist, delete to re-create
[Sun Oct 23 05:00:32 2011] Size of ../../acisf10964/products/events/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src38_src.evt.gz[events] = 13 counts
[Sun Oct 23 05:00:32 2011] Mean chipx,y = (161.15, 721.46)
[Sun Oct 23 05:00:32 2011] Mean tdetx,y = (3782.46, 3924.85)
[Sun Oct 23 05:00:32 2011] chipx,y range = (143.00-177.00, 702.00-737.00)
[Sun Oct 23 05:00:32 2011] Size of ../../acisf10964/products/events/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src38_bgd.evt.gz[events] = 15 counts
[Sun Oct 23 05:00:32 2011] ../../acisf10964/products/images/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src38_src.img and ../../acisf10964/products/images/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src38_bgd.img exist, delete to re-create
[Sun Oct 23 05:00:32 2011] ../../acisf10964/products/spectra/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src38_src.pi and ../../acisf10964/products/spectra/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src38_bgd.pi exist, delete to re-create
[Sun Oct 23 05:00:32 2011] Not generating rmf since there are only 11 counts
[Sun Oct 23 05:00:35 2011] ../../acisf10964/products/lightcurves/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src38_src.lc and ../../acisf10964/products/lightcurves/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src38_bgd.lc exist, delete to re-create
[Sun Oct 23 05:01:35 2011] 190.938
[Sun Oct 23 05:03:22 2011] Updating aperture counts using extracted products
[Sun Oct 23 05:03:22 2011] Error reading totcts from fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src38_src.pi.gz
[Sun Oct 23 05:03:23 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 05:03:23 2011] Using photon index=1.80, rate=0.000391, arf fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src38.arf
[Sun Oct 23 05:03:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 05:03:23 2011] Updating source flux to 6.2e-15
[Sun Oct 23 05:10:35 2011] Source 38 has fewer than 100.000000 counts, skipping spectral fitting