[Sun Oct 23 04:49:32 2011] Detection parameters:
  Position = (611.3, 1036.4) = 20 33 1.68 41 11 10.3
  Extent = 0.8" x 0.6", rotation angle = 147 degrees
  Source counts = 16.1 +/- 5.7
  Background counts = 16.9
  Rate = 0.0005 +/- 0.0002

[Sun Oct 23 04:49:35 2011] Off-axis axis estimate = 8.48'
[Sun Oct 23 04:51:50 2011] Using EEF radius (= 3.18 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:51:50 2011] Initial guess for spatial extent in simple fitting = 3.18"
[Sun Oct 23 04:51:50 2011] source mask rpix=6.5, npix_max = 193, mask sum = 172, frac = 0.887
[Sun Oct 23 04:51:50 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 3.18"
[Sun Oct 23 04:51:53 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src24.ximg exists
[Sun Oct 23 04:51:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src24.csv
[Sun Oct 23 04:51:53 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src24_1.ximg exists
[Sun Oct 23 04:51:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src24.csv
[Sun Oct 23 04:51:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:51:54 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_tfrozen_src24.ximg exists
[Sun Oct 23 04:51:54 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_tfrozen_src24_1.ximg exists
[Sun Oct 23 04:51:54 2011] Fit fullrun_ccd2_acisf10964_pi14-548_cl_pass0_tfrozen_src24 appears to have run properly
[Sun Oct 23 04:52:28 2011] Spatial fit model total counts = 53.313000, observed total counts = 55.000000
[Sun Oct 23 04:52:28 2011] Offset between fit and detection position for source 36 = 0.616157 pixels
[Sun Oct 23 04:52:28 2011] 53.845420 total counts/ 45.490900 bgd. counts: snr = 1.238680
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.616157 pixels
  Position = (611.7, 1036.9) = 20 33 1.68 41 11 10.3
  Extent = 0.9 (0.8-1.4)", rotation angle = 0
  Source counts = 8.4 +/- 7.3
  Background counts = 45.5
  Rate = 0.0003 +/- 0.0002
  Deleting source due to low Poisson probability