[Sun Oct 23 04:49:31 2011] Detection parameters:
  Position = (1104.7, 806.8) = 20 32 40.18 41 9 17.4
  Extent = 1.7" x 1.0", rotation angle = 136 degrees
  Source counts = 26.3 +/- 5.7
  Background counts = 6.7
  Rate = 0.0009 +/- 0.0002

[Sun Oct 23 04:49:35 2011] Off-axis axis estimate = 6.19'
[Sun Oct 23 04:51:50 2011] Using EEF radius (= 1.72 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:51:50 2011] Initial guess for spatial extent in simple fitting = 1.72"
[Sun Oct 23 04:51:50 2011] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.997
[Sun Oct 23 04:51:50 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 1.72"
[Sun Oct 23 04:51:53 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src14.ximg exists
[Sun Oct 23 04:51:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src14.csv
[Sun Oct 23 04:51:53 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src14_1.ximg exists
[Sun Oct 23 04:51:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src14.csv
[Sun Oct 23 04:51:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:51:53 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Sun Oct 23 04:51:53 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Sun Oct 23 04:51:53 2011] Fit fullrun_ccd2_acisf10964_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Sun Oct 23 04:52:28 2011] Spatial fit model total counts = 32.032500, observed total counts = 33.000000
[Sun Oct 23 04:52:28 2011] Offset between fit and detection position for source 30 = 0.286152 pixels
[Sun Oct 23 04:52:28 2011] 32.815870 total counts/ 1.450070 bgd. counts: snr = 26.047250
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.286152 pixels
  Position = (1105.0, 806.9) = 20 32 40.19 41 9 17.2
  Extent = 1.7 (1.5-2.3)", rotation angle = 0
  Source counts = 31.4 +/- 5.7
  Background counts = 1.5
  Rate = 0.001 +/- 0.0002
[Sun Oct 23 04:52:28 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 04:52:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 04:52:28 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 04:52:28 2011] Source does appear to be extended
[Sun Oct 23 04:52:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 04:53:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:53:08 2011] Initial guess for spatial extent in simple fitting = 1.75"
[Sun Oct 23 04:53:08 2011] source mask rpix=3.6, npix_max = 65, mask sum = 64, frac = 0.974
[Sun Oct 23 04:53:08 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 1.75"
[Sun Oct 23 04:53:10 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src13.ximg exists
[Sun Oct 23 04:53:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src13.csv
[Sun Oct 23 04:53:10 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src13_1.ximg exists
[Sun Oct 23 04:53:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src13.csv
[Sun Oct 23 04:53:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:53:11 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sun Oct 23 04:53:11 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Oct 23 04:53:11 2011] Fit fullrun_ccd2_acisf10964_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Sun Oct 23 04:53:38 2011] Spatial fit model total counts = 31.840600, observed total counts = 33.000000
[Sun Oct 23 04:53:38 2011] Offset between fit and detection position for source 30 = 0.142907 pixels
[Sun Oct 23 04:53:38 2011] 32.691600 total counts/ 1.929900 bgd. counts: snr = 22.143330
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.142907 pixels
  Position = (1104.9, 806.7) = 20 32 40.19 41 9 17.1
  Extent = 1.7 (1.1-2.3)", rotation angle = 0
  Source counts = 30.8 +/- 5.7
  Background counts = 1.9
  Rate = 0.001 +/- 0.0002
[Sun Oct 23 04:53:38 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 04:53:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 04:53:38 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 04:53:38 2011] Source does appear to be extended
[Sun Oct 23 04:53:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 04:58:43 2011] Not overwriting source region fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src30_src.reg
[Sun Oct 23 04:58:43 2011] Extracting stamp from image fullrun_ccd2_acisf10964_pi14-548_cl_sm2.00.img.gz, (1025, 727) - (1185, 886)
[Sun Oct 23 04:58:43 2011] Writing fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src30.gif
[Sun Oct 23 04:59:22 2011] ../../acisf10964/products/events/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src30_src.evt and ../../acisf10964/products/events/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Sun Oct 23 04:59:22 2011] Size of ../../acisf10964/products/events/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src30_src.evt.gz[events] = 36 counts
[Sun Oct 23 04:59:22 2011] Mean chipx,y = (796.61, 830.44)
[Sun Oct 23 04:59:22 2011] Mean tdetx,y = (3891.44, 3289.39)
[Sun Oct 23 04:59:22 2011] chipx,y range = (780.00-816.00, 812.00-844.00)
[Sun Oct 23 04:59:22 2011] Size of ../../acisf10964/products/events/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 147 counts
[Sun Oct 23 04:59:22 2011] ../../acisf10964/products/images/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src30_src.img and ../../acisf10964/products/images/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Sun Oct 23 04:59:22 2011] ../../acisf10964/products/spectra/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src30_src.pi and ../../acisf10964/products/spectra/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Sun Oct 23 04:59:22 2011] Not generating rmf since there are only 30 counts
[Sun Oct 23 04:59:25 2011] ../../acisf10964/products/lightcurves/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src30_src.lc and ../../acisf10964/products/lightcurves/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Sun Oct 23 05:01:34 2011] 173.132
[Sun Oct 23 05:03:22 2011] Updating aperture counts using extracted products
[Sun Oct 23 05:03:22 2011] Error reading totcts from fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src30_src.pi.gz
[Sun Oct 23 05:03:23 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 05:03:23 2011] Using photon index=1.80, rate=0.00104, arf fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src30.arf
[Sun Oct 23 05:03:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 05:03:23 2011] Updating source flux to 1.8e-14
[Sun Oct 23 05:10:35 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting