[Sun Oct 23 04:49:31 2011] Detection parameters:
  Position = (556.7, 637.8) = 20 33 4.05 41 7 54.2
  Extent = 0.8" x 0.5", rotation angle = 1 degrees
  Source counts = 16.8 +/- 4.4
  Background counts = 2.2
  Rate = 0.0006 +/- 0.0001

[Sun Oct 23 04:49:35 2011] Off-axis axis estimate = 5.78'
[Sun Oct 23 04:51:50 2011] Using EEF radius (= 1.52 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:51:50 2011] Initial guess for spatial extent in simple fitting = 1.52"
[Sun Oct 23 04:51:50 2011] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.949
[Sun Oct 23 04:51:50 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 1.52"
[Sun Oct 23 04:51:53 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src20.ximg exists
[Sun Oct 23 04:51:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src20.csv
[Sun Oct 23 04:51:53 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src20_1.ximg exists
[Sun Oct 23 04:51:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src20.csv
[Sun Oct 23 04:51:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:51:54 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Sun Oct 23 04:51:54 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Oct 23 04:51:54 2011] Fit fullrun_ccd2_acisf10964_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Sun Oct 23 04:52:28 2011] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 18.127203 pixels away
[Sun Oct 23 04:52:28 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 04:52:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 04:52:28 2011] Assessing source extent using major
[Sun Oct 23 04:52:28 2011] Source does appear to be extended
[Sun Oct 23 04:52:28 2011] Computing asymmetry using major and minor axis, asym = 1.44
[Sun Oct 23 04:53:08 2011] Using EEF radius (= 1.52 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:53:08 2011] Initial guess for spatial extent in simple fitting = 1.52"
[Sun Oct 23 04:53:08 2011] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.949
[Sun Oct 23 04:53:08 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 1.52"
[Sun Oct 23 04:53:10 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src19.ximg exists
[Sun Oct 23 04:53:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src19.csv
[Sun Oct 23 04:53:10 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src19_1.ximg exists
[Sun Oct 23 04:53:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src19.csv
[Sun Oct 23 04:53:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10964_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:53:11 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Sun Oct 23 04:53:11 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Oct 23 04:53:11 2011] Fit fullrun_ccd2_acisf10964_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Sun Oct 23 04:53:38 2011] Spatial fit model total counts = 29.999800, observed total counts = 30.000000
[Sun Oct 23 04:53:38 2011] Offset between fit and detection position for source 26 = 0.919247 pixels
[Sun Oct 23 04:53:38 2011] 29.595800 total counts/ 13.894400 bgd. counts: snr = 4.212292
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.919247 pixels
  Position = (557.5, 638.3) = 20 33 4.03 41 7 54.2
  Extent = 0.8 (0.5-1.1)", rotation angle = 0
  Source counts = 15.7 +/- 5.4
  Background counts = 13.9
  Rate = 0.0005 +/- 0.0002
[Sun Oct 23 04:53:38 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 04:53:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 04:53:38 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 04:53:38 2011] Source does appear to be extended
[Sun Oct 23 04:53:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 04:58:43 2011] Not overwriting source region fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src26_src.reg
[Sun Oct 23 04:58:43 2011] Extracting stamp from image fullrun_ccd2_acisf10964_pi14-548_cl_sm2.00.img.gz, (520, 601) - (595, 676)
[Sun Oct 23 04:58:43 2011] Writing fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src26.gif
[Sun Oct 23 04:59:40 2011] ../../acisf10964/products/events/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src26_src.evt and ../../acisf10964/products/events/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Sun Oct 23 04:59:40 2011] Size of ../../acisf10964/products/events/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src26_src.evt.gz[events] = 20 counts
[Sun Oct 23 04:59:40 2011] Mean chipx,y = (394.25, 416.40)
[Sun Oct 23 04:59:40 2011] Mean tdetx,y = (3477.40, 3691.75)
[Sun Oct 23 04:59:40 2011] chipx,y range = (377.00-416.00, 401.00-440.00)
[Sun Oct 23 04:59:40 2011] Size of ../../acisf10964/products/events/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 37 counts
[Sun Oct 23 04:59:40 2011] ../../acisf10964/products/images/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src26_src.img and ../../acisf10964/products/images/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Sun Oct 23 04:59:40 2011] ../../acisf10964/products/spectra/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src26_src.pi and ../../acisf10964/products/spectra/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Sun Oct 23 04:59:40 2011] Not generating rmf since there are only 15 counts
[Sun Oct 23 04:59:43 2011] ../../acisf10964/products/lightcurves/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src26_src.lc and ../../acisf10964/products/lightcurves/fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Sun Oct 23 05:01:34 2011] 178.109
[Sun Oct 23 05:03:22 2011] Updating aperture counts using extracted products
[Sun Oct 23 05:03:22 2011] Error reading totcts from fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src26_src.pi.gz
[Sun Oct 23 05:03:23 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 05:03:23 2011] Using photon index=1.80, rate=0.00053, arf fullrun_ccd2_acisf10964_pi14-548_pass1_cl_src26.arf
[Sun Oct 23 05:03:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 05:03:23 2011] Updating source flux to 8.8e-15
[Sun Oct 23 05:10:35 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting