[Sun Oct 23 04:49:30 2011] Detection parameters:
  Position = (614.9, 1237.9) = 20 33 1.53 41 12 49.4
  Extent = 4.0" x 2.3", rotation angle = 87 degrees
  Source counts = 28.8 +/- 7.0
  Background counts = 20.2
  Rate = 0.001 +/- 0.0002

[Sun Oct 23 04:49:35 2011] Off-axis axis estimate = 10.04'
[Sun Oct 23 04:51:50 2011] Using EEF radius (= 4.47 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:51:50 2011] Initial guess for spatial extent in simple fitting = 4.47"
[Sun Oct 23 04:51:50 2011] source mask rpix=9.1, npix_max = 367, mask sum = 370, frac = 1.008
[Sun Oct 23 04:51:50 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 4.47"
[Sun Oct 23 04:51:53 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src11.ximg exists
[Sun Oct 23 04:51:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src11.csv
[Sun Oct 23 04:51:53 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src11_1.ximg exists
[Sun Oct 23 04:51:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src11.csv
[Sun Oct 23 04:51:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10964_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:51:53 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sun Oct 23 04:51:53 2011] fullrun_ccd2_acisf10964_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Oct 23 04:51:53 2011] Fit fullrun_ccd2_acisf10964_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Oct 23 04:52:28 2011] Spatial fit model total counts = 87.255000, observed total counts = 84.000000
[Sun Oct 23 04:52:28 2011] Offset between fit and detection position for source 10 = 2.308001 pixels
[Sun Oct 23 04:52:28 2011] 86.801000 total counts/ 73.790800 bgd. counts: snr = 1.514547
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 2.308001 pixels
  Position = (612.8, 1238.8) = 20 33 1.64 41 12 49.6
  Extent = 1.1" x 1.1", rotation angle = 0
  Source counts = 13.0 +/- 9.3
  Background counts = 73.8
  Rate = 0.0004 +/- 0.0003
  Deleting source due to low Poisson probability