[Sun Oct 23 04:49:21 2011] Detection parameters:
  Position = (1007.5, 760.5) = 20 32 25.40 40 57 27.7
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 39036.7 +/- 252.8
  Background counts = 24892.3
  Rate = 1 +/- 0.009

[Sun Oct 23 04:49:29 2011] Off-axis axis estimate = 6.96'
[Sun Oct 23 04:51:42 2011] Using EEF radius (= 2.15 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:51:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 04:51:42 2011] Initial guess for spatial extent in simple fitting = 2.15"
[Sun Oct 23 04:51:42 2011] source mask rpix=4.4, npix_max = 95, mask sum = 72, frac = 0.757
[Sun Oct 23 04:51:42 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.15"
[Sun Oct 23 04:51:44 2011] fullrun_ccd1_acisf10964_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 23 04:51:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10964_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 04:51:44 2011] fullrun_ccd1_acisf10964_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 23 04:51:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10964_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 04:51:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10964_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10964_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:51:46 2011] fullrun_ccd1_acisf10964_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 23 04:51:46 2011] fullrun_ccd1_acisf10964_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 23 04:51:46 2011] Fit fullrun_ccd1_acisf10964_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 23 04:52:22 2011] Spatial fit model total counts = 91585.700000, observed total counts = 90560.000000
[Sun Oct 23 04:52:22 2011] Offset between fit and detection position for source 1 = 5.667544 pixels
[Sun Oct 23 04:52:22 2011] 79422.200000 total counts/ 60952.400000 bgd. counts: snr = 74.811229
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 5.667544 pixels
  Position = (1008.4, 766.1) = 20 32 25.38 40 57 30.2
  Extent = 2.1 (2.1-2.2)", rotation angle = 0
  Source counts = 18469.8 +/- 281.8
  Background counts = 60952.4
  Rate = 0.6 +/- 0.01
[Sun Oct 23 04:52:22 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 04:52:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 04:52:22 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 04:52:22 2011] Source does appear to be extended
[Sun Oct 23 04:52:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 04:52:22 2011] Source is confused with source 5
[Sun Oct 23 04:53:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:53:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 04:53:02 2011] Initial guess for spatial extent in simple fitting = 2.13"
[Sun Oct 23 04:53:02 2011] source mask rpix=4.3, npix_max = 93, mask sum = 83, frac = 0.888
[Sun Oct 23 04:53:02 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.13"
[Sun Oct 23 04:53:03 2011] fullrun_ccd1_acisf10964_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 23 04:53:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10964_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 04:53:03 2011] fullrun_ccd1_acisf10964_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 23 04:53:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10964_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 04:53:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10964_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10964_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:53:05 2011] fullrun_ccd1_acisf10964_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 23 04:53:05 2011] fullrun_ccd1_acisf10964_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 23 04:53:05 2011] Fit fullrun_ccd1_acisf10964_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 23 04:53:33 2011] Spatial fit model total counts = 78496.500000, observed total counts = 78305.000000
[Sun Oct 23 04:53:33 2011] Offset between fit and detection position for source 1 = 2.626515 pixels
[Sun Oct 23 04:53:33 2011] 76600.600000 total counts/ 62551.600000 bgd. counts: snr = 56.172817
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.626515 pixels
  Position = (1007.7, 768.6) = 20 32 25.41 40 57 31.4
  Extent = 1.7 (1.7-1.8)", rotation angle = 0
  Source counts = 14049.0 +/- 276.8
  Background counts = 62551.6
  Rate = 0.5 +/- 0.009
[Sun Oct 23 04:53:33 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 04:53:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 04:53:33 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 04:53:33 2011] Source does appear to be extended
[Sun Oct 23 04:53:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 04:55:41 2011] Not overwriting source region fullrun_ccd1_acisf10964_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 23 04:55:41 2011] Extracting stamp from image fullrun_ccd1_acisf10964_pi14-548_cl_sm2.00.img.gz, (928, 689) - (1087, 848)
[Sun Oct 23 04:55:41 2011] Writing fullrun_ccd1_acisf10964_pi14-548_pass1_cl_src1.gif
[Sun Oct 23 04:55:51 2011] ../../acisf10964/products/events/fullrun_ccd1_acisf10964_pi14-548_pass1_cl_src1_src.evt and ../../acisf10964/products/events/fullrun_ccd1_acisf10964_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 23 04:55:51 2011] Size of ../../acisf10964/products/events/fullrun_ccd1_acisf10964_pi14-548_pass1_cl_src1_src.evt.gz[events] = 46150 counts
[Sun Oct 23 04:55:51 2011] Mean chipx,y = (298.63, 276.40)
[Sun Oct 23 04:55:51 2011] Mean tdetx,y = (4855.60, 4405.63)
[Sun Oct 23 04:55:51 2011] chipx,y range = (267.00-330.00, 245.00-309.00)
[Sun Oct 23 04:55:51 2011] Size of ../../acisf10964/products/events/fullrun_ccd1_acisf10964_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 199 counts
[Sun Oct 23 04:55:51 2011] ../../acisf10964/products/images/fullrun_ccd1_acisf10964_pi14-548_pass1_cl_src1_src.img and ../../acisf10964/products/images/fullrun_ccd1_acisf10964_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 23 04:55:51 2011] ../../acisf10964/products/spectra/fullrun_ccd1_acisf10964_pi14-548_pass1_cl_src1_src.pi and ../../acisf10964/products/spectra/fullrun_ccd1_acisf10964_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct 23 04:55:54 2011] ../../acisf10964/products/lightcurves/fullrun_ccd1_acisf10964_pi14-548_pass1_cl_src1_src.lc and ../../acisf10964/products/lightcurves/fullrun_ccd1_acisf10964_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 23 04:58:41 2011] Keeping rmf generated by specextract
[Sun Oct 23 04:58:41 2011] 175.26
[Sun Oct 23 05:03:19 2011] Updating aperture counts using extracted products
[Sun Oct 23 05:03:19 2011] Error reading totcts from fullrun_ccd1_acisf10964_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 23 05:03:21 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 05:03:21 2011] Using photon index=1.80, rate=0.474, arf fullrun_ccd1_acisf10964_pi14-548_pass1_cl_src1.arf
[Sun Oct 23 05:03:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 05:03:21 2011] Updating source flux to 8.1e-12
[Sun Oct 23 05:03:44 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Oct 23 05:10:35 2011] Reading fit data from acisf10964/analysis//spectral/fullrun_ccd1_acisf10964_pi14-548_pass1_cl_src1_pl.csv
[Sun Oct 23 05:10:35 2011] Spectral fit parameter nH value = 1.56116e+22
[Sun Oct 23 05:10:35 2011] Spectral fit parameter PhoIndex value = -0.881596
[Sun Oct 23 05:10:35 2011] Failed to get F(0.3-8.0) from acisf10964/analysis//spectral/fullrun_ccd1_acisf10964_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Oct 23 05:10:35 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 05:10:35 2011] Using Nh = 1.6e+22, photon index=-0.88, rate=0.474, arf fullrun_ccd1_acisf10964_pi14-548_pass1_cl_src1.arf
[Sun Oct 23 05:10:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 05:10:35 2011] Updating source flux to 2.1e-11