[Thu Oct 20 22:08:03 2011] Detection parameters:
  Position = (260.0, 956.0) = 20 34 30.00 41 17 35.7
  Extent = 0.9" x 0.5", rotation angle = 56 degrees
  Source counts = 10.1 +/- 3.3
  Background counts = 0.9
  Rate = 0.0003 +/- 0.0001

[Thu Oct 20 22:08:03 2011] Off-axis axis estimate = 3.89'
[Thu Oct 20 22:09:06 2011] Using EEF radius (= 0.80 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:06 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Thu Oct 20 22:09:06 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.889
[Thu Oct 20 22:09:06 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 0.80"
[Thu Oct 20 22:09:08 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src37.ximg exists
[Thu Oct 20 22:09:08 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src37_1.ximg exists
[Thu Oct 20 22:09:08 2011] Fit fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src37 appears to have run properly
[Thu Oct 20 22:09:09 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Thu Oct 20 22:09:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src37.csv
[Thu Oct 20 22:09:09 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Thu Oct 20 22:09:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src37.csv
[Thu Oct 20 22:09:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:09:24 2011] Spatial fit model total counts = 14.543100, observed total counts = 14.000000
[Thu Oct 20 22:09:24 2011] Offset between fit and detection position for source 52 = 0.995975 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.995975 pixels
  Position = (259.7, 956.9) = 20 34 30.04 41 17 35.9
  Extent = 1.4 (0.9-1.6)" x 0.5 (0.3-0.7)", rotation angle = 218 (200-234) degrees
  Source counts = 14.5 +/- 3.8
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Thu Oct 20 22:09:24 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:09:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:09:24 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 22:09:24 2011] Source does appear to be extended
[Thu Oct 20 22:09:24 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.22
[Thu Oct 20 22:09:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:51 2011] Initial guess for spatial extent in simple fitting = 0.95"
[Thu Oct 20 22:09:51 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.058
[Thu Oct 20 22:09:51 2011] Giving source the simple spatial ID 36 for pass 1, mean size = 0.95"
[Thu Oct 20 22:09:52 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src36.ximg exists
[Thu Oct 20 22:09:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src36.csv
[Thu Oct 20 22:09:52 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src36_1.ximg exists
[Thu Oct 20 22:09:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src36.csv
[Thu Oct 20 22:09:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:09:53 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src36.ximg exists
[Thu Oct 20 22:09:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src36.csv
[Thu Oct 20 22:09:53 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src36_1.ximg exists
[Thu Oct 20 22:09:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src36.csv
[Thu Oct 20 22:09:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:10:08 2011] Spatial fit model total counts = 9.436180, observed total counts = 14.000000
[Thu Oct 20 22:10:08 2011] Poor agreement between spatial fit and data for source 52
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Oct 20 22:10:08 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:10:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:10:08 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 22:10:08 2011] Source does appear to be extended
[Thu Oct 20 22:10:08 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.22
[Thu Oct 20 22:14:53 2011] Not overwriting source region fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src52_src.reg
[Thu Oct 20 22:14:53 2011] Extracting stamp from image fullrun_ccd3_acisf10963_pi14-548_cl_sm2.00.img.gz, (197, 895) - (322, 1019)
[Thu Oct 20 22:14:53 2011] Writing fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src52.gif
[Thu Oct 20 22:16:44 2011] ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src52_src.evt and ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src52_bgd.evt exist, delete to re-create
[Thu Oct 20 22:16:44 2011] Size of ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src52_src.evt.gz[events] = 12 counts
[Thu Oct 20 22:16:44 2011] Mean chipx,y = (471.75, 1009.83)
[Thu Oct 20 22:16:44 2011] Mean tdetx,y = (4122.17, 3532.75)
[Thu Oct 20 22:16:44 2011] chipx,y range = (453.00-485.00, 1002.00-1021.00)
[Thu Oct 20 22:16:44 2011] Size of ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src52_bgd.evt.gz[events] = 31 counts
[Thu Oct 20 22:16:44 2011] ../../acisf10963/products/images/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src52_src.img and ../../acisf10963/products/images/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src52_bgd.img exist, delete to re-create
[Thu Oct 20 22:16:44 2011] ../../acisf10963/products/spectra/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src52_src.pi and ../../acisf10963/products/spectra/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src52_bgd.pi exist, delete to re-create
[Thu Oct 20 22:16:44 2011] Not generating rmf since there are only 14 counts
[Thu Oct 20 22:16:47 2011] ../../acisf10963/products/lightcurves/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src52_src.lc and ../../acisf10963/products/lightcurves/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src52_bgd.lc exist, delete to re-create
[Thu Oct 20 22:17:56 2011] 96.5738
[Thu Oct 20 22:18:25 2011] Updating aperture counts using extracted products
[Thu Oct 20 22:18:25 2011] Error reading totcts from fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src52_src.pi.gz
[Thu Oct 20 22:18:26 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 22:18:26 2011] Using photon index=1.80, rate=0.000495, arf fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src52.arf
[Thu Oct 20 22:18:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 22:18:26 2011] Updating source flux to 1.5e-14
[Thu Oct 20 22:18:43 2011] Flag p found in src. 52 procflags, skipping spectral fitting
[Thu Oct 20 22:18:43 2011] Source 52 has fewer than 100.000000 counts, skipping spectral fitting