[Thu Oct 20 22:08:02 2011] Detection parameters:
  Position = (970.1, 415.3) = 20 33 59.05 41 13 9.3
  Extent = 2.0" x 1.1", rotation angle = 10 degrees
  Source counts = 16.7 +/- 4.6
  Background counts = 4.3
  Rate = 0.0006 +/- 0.0002

[Thu Oct 20 22:08:03 2011] Off-axis axis estimate = 7.74'
[Thu Oct 20 22:09:06 2011] Using EEF radius (= 2.65 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:06 2011] Initial guess for spatial extent in simple fitting = 2.65"
[Thu Oct 20 22:09:06 2011] source mask rpix=5.4, npix_max = 138, mask sum = 144, frac = 1.037
[Thu Oct 20 22:09:06 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 2.65"
[Thu Oct 20 22:09:07 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src23.ximg exists
[Thu Oct 20 22:09:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src23.csv
[Thu Oct 20 22:09:07 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src23_1.ximg exists
[Thu Oct 20 22:09:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src23.csv
[Thu Oct 20 22:09:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:09:09 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Thu Oct 20 22:09:09 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Oct 20 22:09:09 2011] Fit fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Oct 20 22:09:24 2011] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 30.130278 pixels away
[Thu Oct 20 22:09:24 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:09:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:09:24 2011] Assessing source extent using major
[Thu Oct 20 22:09:24 2011] Source does appear to be extended
[Thu Oct 20 22:09:24 2011] Computing asymmetry using major and minor axis, asym = 1.87
[Thu Oct 20 22:09:24 2011] Source is asymmetric
[Thu Oct 20 22:09:51 2011] Using EEF radius (= 2.65 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:51 2011] Initial guess for spatial extent in simple fitting = 2.65"
[Thu Oct 20 22:09:51 2011] source mask rpix=5.4, npix_max = 138, mask sum = 144, frac = 1.037
[Thu Oct 20 22:09:51 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 2.65"
[Thu Oct 20 22:09:52 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src23.ximg exists
[Thu Oct 20 22:09:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src23.csv
[Thu Oct 20 22:09:52 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src23_1.ximg exists
[Thu Oct 20 22:09:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src23.csv
[Thu Oct 20 22:09:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:09:53 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Thu Oct 20 22:09:53 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Oct 20 22:09:53 2011] Fit fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Thu Oct 20 22:10:08 2011] Spatial fit model total counts = 30.000100, observed total counts = 30.000000
[Thu Oct 20 22:10:08 2011] Offset between fit and detection position for source 39 = 0.808089 pixels
[Thu Oct 20 22:10:08 2011] 29.561900 total counts/ 17.804700 bgd. counts: snr = 2.786356
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.808089 pixels
  Position = (970.7, 415.9) = 20 33 59.04 41 13 9.3
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 11.8 +/- 5.4
  Background counts = 17.8
  Rate = 0.0004 +/- 0.0002
[Thu Oct 20 22:10:08 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:10:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:10:08 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 22:10:08 2011] Source does appear to be extended
[Thu Oct 20 22:10:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 22:14:52 2011] Not overwriting source region fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src39_src.reg
[Thu Oct 20 22:14:52 2011] Extracting stamp from image fullrun_ccd3_acisf10963_pi14-548_cl_sm2.00.img.gz, (924, 370) - (1017, 462)
[Thu Oct 20 22:14:52 2011] Writing fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src39.gif
[Thu Oct 20 22:16:03 2011] ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src39_src.evt and ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src39_bgd.evt exist, delete to re-create
[Thu Oct 20 22:16:03 2011] Size of ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src39_src.evt.gz[events] = 15 counts
[Thu Oct 20 22:16:03 2011] Mean chipx,y = (630.60, 139.13)
[Thu Oct 20 22:16:03 2011] Mean tdetx,y = (4992.87, 3691.60)
[Thu Oct 20 22:16:03 2011] chipx,y range = (607.00-642.00, 117.00-154.00)
[Thu Oct 20 22:16:03 2011] Size of ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src39_bgd.evt.gz[events] = 36 counts
[Thu Oct 20 22:16:03 2011] ../../acisf10963/products/images/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src39_src.img and ../../acisf10963/products/images/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src39_bgd.img exist, delete to re-create
[Thu Oct 20 22:16:03 2011] ../../acisf10963/products/spectra/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src39_src.pi and ../../acisf10963/products/spectra/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src39_bgd.pi exist, delete to re-create
[Thu Oct 20 22:16:03 2011] Not generating rmf since there are only 11 counts
[Thu Oct 20 22:16:06 2011] ../../acisf10963/products/lightcurves/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src39_src.lc and ../../acisf10963/products/lightcurves/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src39_bgd.lc exist, delete to re-create
[Thu Oct 20 22:17:56 2011] 172.799
[Thu Oct 20 22:18:25 2011] Updating aperture counts using extracted products
[Thu Oct 20 22:18:25 2011] Error reading totcts from fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src39_src.pi.gz
[Thu Oct 20 22:18:26 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 22:18:26 2011] Using photon index=1.80, rate=0.0004, arf fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src39.arf
[Thu Oct 20 22:18:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 22:18:26 2011] Updating source flux to 6.8e-15
[Thu Oct 20 22:18:43 2011] Source 39 has fewer than 100.000000 counts, skipping spectral fitting