[Thu Oct 20 22:08:02 2011] Detection parameters:
  Position = (703.0, 332.8) = 20 34 10.70 41 12 28.9
  Extent = 0.8" x 0.5", rotation angle = 173 degrees
  Source counts = 14.9 +/- 4.0
  Background counts = 1.1
  Rate = 0.0005 +/- 0.0001

[Thu Oct 20 22:08:03 2011] Off-axis axis estimate = 5.74'
[Thu Oct 20 22:09:06 2011] Using EEF radius (= 1.50 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:06 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Thu Oct 20 22:09:06 2011] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.107
[Thu Oct 20 22:09:06 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 1.50"
[Thu Oct 20 22:09:07 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src25.ximg exists
[Thu Oct 20 22:09:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src25.csv
[Thu Oct 20 22:09:07 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src25_1.ximg exists
[Thu Oct 20 22:09:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src25.csv
[Thu Oct 20 22:09:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:09:09 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Thu Oct 20 22:09:09 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Oct 20 22:09:09 2011] Fit fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Thu Oct 20 22:09:24 2011] Spatial fit model total counts = 35.555200, observed total counts = 36.000000
[Thu Oct 20 22:09:24 2011] Offset between fit and detection position for source 36 = 1.914599 pixels
[Thu Oct 20 22:09:24 2011] 35.041540 total counts/ 6.608440 bgd. counts: snr = 11.060499
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 1.914599 pixels
  Position = (703.9, 331.1) = 20 34 10.68 41 12 27.8
  Extent = 1.3 (0.9-2.0)", rotation angle = 0
  Source counts = 28.4 +/- 5.9
  Background counts = 6.6
  Rate = 0.001 +/- 0.0002
[Thu Oct 20 22:09:24 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:09:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:09:24 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 22:09:24 2011] Source does appear to be extended
[Thu Oct 20 22:09:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 22:09:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:51 2011] Initial guess for spatial extent in simple fitting = 1.29"
[Thu Oct 20 22:09:51 2011] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.919
[Thu Oct 20 22:09:51 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 1.29"
[Thu Oct 20 22:09:52 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src25.ximg exists
[Thu Oct 20 22:09:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src25.csv
[Thu Oct 20 22:09:52 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src25_1.ximg exists
[Thu Oct 20 22:09:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src25.csv
[Thu Oct 20 22:09:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:09:53 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Thu Oct 20 22:09:53 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Oct 20 22:09:53 2011] Fit fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Thu Oct 20 22:10:08 2011] Spatial fit model total counts = 32.698200, observed total counts = 34.000000
[Thu Oct 20 22:10:08 2011] Offset between fit and detection position for source 36 = 0.383121 pixels
[Thu Oct 20 22:10:08 2011] 32.105870 total counts/ 4.471670 bgd. counts: snr = 13.068087
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.383121 pixels
  Position = (704.2, 330.8) = 20 34 10.67 41 12 27.7
  Extent = 1.2 (0.9-1.8)", rotation angle = 0
  Source counts = 27.6 +/- 5.7
  Background counts = 4.5
  Rate = 0.0009 +/- 0.0002
[Thu Oct 20 22:10:08 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:10:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:10:08 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 22:10:08 2011] Source does appear to be extended
[Thu Oct 20 22:10:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 22:14:52 2011] Not overwriting source region fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src36_src.reg
[Thu Oct 20 22:14:52 2011] Extracting stamp from image fullrun_ccd3_acisf10963_pi14-548_cl_sm2.00.img.gz, (647, 274) - (761, 388)
[Thu Oct 20 22:14:52 2011] Writing fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src36.gif
[Thu Oct 20 22:16:10 2011] ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src36_src.evt and ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src36_bgd.evt exist, delete to re-create
[Thu Oct 20 22:16:10 2011] Size of ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src36_src.evt.gz[events] = 37 counts
[Thu Oct 20 22:16:10 2011] Mean chipx,y = (817.62, 336.32)
[Thu Oct 20 22:16:10 2011] Mean tdetx,y = (4795.68, 3878.62)
[Thu Oct 20 22:16:10 2011] chipx,y range = (800.00-840.00, 317.00-360.00)
[Thu Oct 20 22:16:10 2011] Size of ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 53 counts
[Thu Oct 20 22:16:10 2011] ../../acisf10963/products/images/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src36_src.img and ../../acisf10963/products/images/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src36_bgd.img exist, delete to re-create
[Thu Oct 20 22:16:10 2011] ../../acisf10963/products/spectra/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src36_src.pi and ../../acisf10963/products/spectra/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src36_bgd.pi exist, delete to re-create
[Thu Oct 20 22:16:10 2011] Not generating rmf since there are only 27 counts
[Thu Oct 20 22:16:12 2011] ../../acisf10963/products/lightcurves/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src36_src.lc and ../../acisf10963/products/lightcurves/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src36_bgd.lc exist, delete to re-create
[Thu Oct 20 22:17:56 2011] 185.162
[Thu Oct 20 22:18:25 2011] Updating aperture counts using extracted products
[Thu Oct 20 22:18:25 2011] Error reading totcts from fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src36_src.pi.gz
[Thu Oct 20 22:18:26 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 22:18:26 2011] Using photon index=1.80, rate=0.000941, arf fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src36.arf
[Thu Oct 20 22:18:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 22:18:26 2011] Updating source flux to 1.5e-14
[Thu Oct 20 22:18:43 2011] Source 36 has fewer than 100.000000 counts, skipping spectral fitting