[Thu Oct 20 22:08:02 2011] Detection parameters:
  Position = (330.7, 884.6) = 20 34 26.92 41 17 0.6
  Extent = 0.6" x 0.5", rotation angle = 39 degrees
  Source counts = 12.1 +/- 3.6
  Background counts = 0.9
  Rate = 0.0004 +/- 0.0001

[Thu Oct 20 22:08:03 2011] Off-axis axis estimate = 3.73'
[Thu Oct 20 22:09:06 2011] Using EEF radius (= 0.75 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:06 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Thu Oct 20 22:09:06 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.968
[Thu Oct 20 22:09:06 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 0.75"
[Thu Oct 20 22:09:07 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src31.ximg exists
[Thu Oct 20 22:09:07 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src31_1.ximg exists
[Thu Oct 20 22:09:07 2011] Fit fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src31 appears to have run properly
[Thu Oct 20 22:09:09 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src31.ximg exists
[Thu Oct 20 22:09:09 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src31_1.ximg exists
[Thu Oct 20 22:09:09 2011] Fit fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src31 appears to have run properly
[Thu Oct 20 22:09:24 2011] Spatial fit model total counts = 13.193700, observed total counts = 14.000000
[Thu Oct 20 22:09:24 2011] Offset between fit and detection position for source 32 = 0.575257 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.575257 pixels
  Position = (331.0, 885.0) = 20 34 26.92 41 17 0.5
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 13.7 +/- 3.7
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Thu Oct 20 22:09:24 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:09:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:09:24 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 22:09:24 2011] Source does appear to be extended
[Thu Oct 20 22:09:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 22:09:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:51 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Thu Oct 20 22:09:51 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.997
[Thu Oct 20 22:09:51 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 0.74"
[Thu Oct 20 22:09:52 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src30.ximg exists
[Thu Oct 20 22:09:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src30.csv
[Thu Oct 20 22:09:52 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src30_1.ximg exists
[Thu Oct 20 22:09:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src30.csv
[Thu Oct 20 22:09:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:09:53 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Thu Oct 20 22:09:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src30.csv
[Thu Oct 20 22:09:53 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Thu Oct 20 22:09:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src30.csv
[Thu Oct 20 22:09:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:10:08 2011] Spatial fit model total counts = 12.771600, observed total counts = 14.000000
[Thu Oct 20 22:10:08 2011] Offset between fit and detection position for source 32 = 0.036525 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.036525 pixels
  Position = (331.0, 885.0) = 20 34 26.92 41 17 0.5
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 13.4 +/- 3.7
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Thu Oct 20 22:10:08 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:10:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:10:08 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 22:10:08 2011] Source does appear to be extended
[Thu Oct 20 22:10:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 22:14:52 2011] Not overwriting source region fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src32_src.reg
[Thu Oct 20 22:14:52 2011] Extracting stamp from image fullrun_ccd3_acisf10963_pi14-548_cl_sm2.00.img.gz, (298, 851) - (365, 918)
[Thu Oct 20 22:14:52 2011] Writing fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src32.gif
[Thu Oct 20 22:16:26 2011] ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src32_src.evt and ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src32_bgd.evt exist, delete to re-create
[Thu Oct 20 22:16:26 2011] Size of ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src32_src.evt.gz[events] = 13 counts
[Thu Oct 20 22:16:26 2011] Mean chipx,y = (498.08, 923.69)
[Thu Oct 20 22:16:26 2011] Mean tdetx,y = (4208.31, 3559.08)
[Thu Oct 20 22:16:26 2011] chipx,y range = (483.00-516.00, 907.00-939.00)
[Thu Oct 20 22:16:26 2011] Size of ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src32_bgd.evt.gz[events] = 12 counts
[Thu Oct 20 22:16:26 2011] ../../acisf10963/products/images/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src32_src.img and ../../acisf10963/products/images/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src32_bgd.img exist, delete to re-create
[Thu Oct 20 22:16:26 2011] ../../acisf10963/products/spectra/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src32_src.pi and ../../acisf10963/products/spectra/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src32_bgd.pi exist, delete to re-create
[Thu Oct 20 22:16:26 2011] Not generating rmf since there are only 13 counts
[Thu Oct 20 22:16:29 2011] ../../acisf10963/products/lightcurves/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src32_src.lc and ../../acisf10963/products/lightcurves/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src32_bgd.lc exist, delete to re-create
[Thu Oct 20 22:17:56 2011] 169.849
[Thu Oct 20 22:18:25 2011] Updating aperture counts using extracted products
[Thu Oct 20 22:18:25 2011] Error reading totcts from fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src32_src.pi.gz
[Thu Oct 20 22:18:26 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 22:18:26 2011] Using photon index=1.80, rate=0.000456, arf fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src32.arf
[Thu Oct 20 22:18:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 22:18:26 2011] Updating source flux to 7.9e-15
[Thu Oct 20 22:18:43 2011] Source 32 has fewer than 100.000000 counts, skipping spectral fitting