[Thu Oct 20 22:08:02 2011] Detection parameters:
  Position = (401.4, 629.4) = 20 34 23.84 41 14 55.0
  Extent = 0.5" x 0.5", rotation angle = 180 degrees
  Source counts = 16.0 +/- 4.1
  Background counts = 1.0
  Rate = 0.0005 +/- 0.0001

[Thu Oct 20 22:08:03 2011] Off-axis axis estimate = 3.10'
[Thu Oct 20 22:09:06 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:06 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Thu Oct 20 22:09:06 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.759
[Thu Oct 20 22:09:06 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 0.60"
[Thu Oct 20 22:09:07 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src24.ximg exists
[Thu Oct 20 22:09:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src24.csv
[Thu Oct 20 22:09:07 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src24_1.ximg exists
[Thu Oct 20 22:09:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src24.csv
[Thu Oct 20 22:09:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:09:09 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src24.ximg exists
[Thu Oct 20 22:09:09 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src24_1.ximg exists
[Thu Oct 20 22:09:09 2011] Fit fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src24 appears to have run properly
[Thu Oct 20 22:09:24 2011] Spatial fit model total counts = 24.177500, observed total counts = 25.000000
[Thu Oct 20 22:09:24 2011] Offset between fit and detection position for source 27 = 0.496161 pixels
[Thu Oct 20 22:09:24 2011] 24.858100 total counts/ 10.447800 bgd. counts: snr = 4.458211
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.496161 pixels
  Position = (401.7, 629.8) = 20 34 23.85 41 14 55.0
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 14.4 +/- 5.0
  Background counts = 10.4
  Rate = 0.0005 +/- 0.0002
[Thu Oct 20 22:09:24 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:09:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:09:24 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 22:09:24 2011] Source does appear to be extended
[Thu Oct 20 22:09:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 22:09:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:51 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Thu Oct 20 22:09:51 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.830
[Thu Oct 20 22:09:51 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 0.56"
[Thu Oct 20 22:09:52 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src24.ximg exists
[Thu Oct 20 22:09:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src24.csv
[Thu Oct 20 22:09:52 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src24_1.ximg exists
[Thu Oct 20 22:09:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src24.csv
[Thu Oct 20 22:09:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:09:53 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src24.ximg exists
[Thu Oct 20 22:09:53 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src24_1.ximg exists
[Thu Oct 20 22:09:53 2011] Fit fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src24 appears to have run properly
[Thu Oct 20 22:10:08 2011] Spatial fit model total counts = 25.742600, observed total counts = 26.000000
[Thu Oct 20 22:10:08 2011] Offset between fit and detection position for source 27 = 0.033989 pixels
[Thu Oct 20 22:10:08 2011] 26.309900 total counts/ 11.316200 bgd. counts: snr = 4.457163
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.033989 pixels
  Position = (401.7, 629.8) = 20 34 23.85 41 14 55.0
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 15.0 +/- 5.1
  Background counts = 11.3
  Rate = 0.0005 +/- 0.0002
[Thu Oct 20 22:10:08 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:10:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:10:08 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 22:10:08 2011] Source does appear to be extended
[Thu Oct 20 22:10:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 22:14:52 2011] Not overwriting source region fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src27_src.reg
[Thu Oct 20 22:14:52 2011] Extracting stamp from image fullrun_ccd3_acisf10963_pi14-548_cl_sm2.00.img.gz, (376, 605) - (427, 655)
[Thu Oct 20 22:14:52 2011] Writing fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src27.gif
[Thu Oct 20 22:16:06 2011] ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src27_src.evt and ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src27_bgd.evt exist, delete to re-create
[Thu Oct 20 22:16:06 2011] Size of ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src27_src.evt.gz[events] = 18 counts
[Thu Oct 20 22:16:06 2011] Mean chipx,y = (696.28, 745.00)
[Thu Oct 20 22:16:06 2011] Mean tdetx,y = (4387.00, 3757.28)
[Thu Oct 20 22:16:06 2011] chipx,y range = (678.00-709.00, 726.00-757.00)
[Thu Oct 20 22:16:06 2011] Size of ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 19 counts
[Thu Oct 20 22:16:06 2011] ../../acisf10963/products/images/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src27_src.img and ../../acisf10963/products/images/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src27_bgd.img exist, delete to re-create
[Thu Oct 20 22:16:06 2011] ../../acisf10963/products/spectra/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src27_src.pi and ../../acisf10963/products/spectra/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src27_bgd.pi exist, delete to re-create
[Thu Oct 20 22:16:06 2011] Not generating rmf since there are only 14 counts
[Thu Oct 20 22:16:10 2011] ../../acisf10963/products/lightcurves/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src27_src.lc and ../../acisf10963/products/lightcurves/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src27_bgd.lc exist, delete to re-create
[Thu Oct 20 22:17:56 2011] 193.952
[Thu Oct 20 22:18:25 2011] Updating aperture counts using extracted products
[Thu Oct 20 22:18:25 2011] Error reading totcts from fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src27_src.pi.gz
[Thu Oct 20 22:18:26 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 22:18:26 2011] Using photon index=1.80, rate=0.00051, arf fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src27.arf
[Thu Oct 20 22:18:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 22:18:26 2011] Updating source flux to 7.8e-15
[Thu Oct 20 22:18:43 2011] Source 27 has fewer than 100.000000 counts, skipping spectral fitting