[Thu Oct 20 22:08:01 2011] Detection parameters:
  Position = (484.6, 617.1) = 20 34 20.21 41 14 48.9
  Extent = 0.8" x 0.5", rotation angle = 109 degrees
  Source counts = 14.7 +/- 4.0
  Background counts = 1.3
  Rate = 0.0005 +/- 0.0001

[Thu Oct 20 22:08:03 2011] Off-axis axis estimate = 3.75'
[Thu Oct 20 22:09:06 2011] Using EEF radius (= 0.76 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:06 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Thu Oct 20 22:09:06 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.960
[Thu Oct 20 22:09:06 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 0.76"
[Thu Oct 20 22:09:07 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src26.ximg exists
[Thu Oct 20 22:09:07 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src26_1.ximg exists
[Thu Oct 20 22:09:07 2011] Fit fullrun_ccd3_acisf10963_pi14-548_cl_pass0_src26 appears to have run properly
[Thu Oct 20 22:09:09 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Thu Oct 20 22:09:09 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Oct 20 22:09:09 2011] Fit fullrun_ccd3_acisf10963_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Thu Oct 20 22:09:24 2011] Spatial fit model total counts = 17.620400, observed total counts = 18.000000
[Thu Oct 20 22:09:24 2011] Offset between fit and detection position for source 26 = 1.135364 pixels
[Thu Oct 20 22:09:24 2011] 17.031180 total counts/ 3.473980 bgd. counts: snr = 7.273716
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.135364 pixels
  Position = (484.9, 618.1) = 20 34 20.22 41 14 49.2
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 13.6 +/- 4.1
  Background counts = 3.5
  Rate = 0.0005 +/- 0.0001
[Thu Oct 20 22:09:24 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:09:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:09:24 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 22:09:24 2011] Source does appear to be extended
[Thu Oct 20 22:09:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 22:09:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:51 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Thu Oct 20 22:09:51 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.294
[Thu Oct 20 22:09:51 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 0.62"
[Thu Oct 20 22:09:52 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src26.ximg exists
[Thu Oct 20 22:09:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src26.csv
[Thu Oct 20 22:09:52 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src26_1.ximg exists
[Thu Oct 20 22:09:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src26.csv
[Thu Oct 20 22:09:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10963_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:09:53 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Thu Oct 20 22:09:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src26.csv
[Thu Oct 20 22:09:53 2011] fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Thu Oct 20 22:09:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src26.csv
[Thu Oct 20 22:09:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10963_pi14-548_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:10:08 2011] Spatial fit model total counts = 16.644500, observed total counts = 18.000000
[Thu Oct 20 22:10:08 2011] Offset between fit and detection position for source 26 = 0.087278 pixels
[Thu Oct 20 22:10:08 2011] 15.601120 total counts/ 2.152720 bgd. counts: snr = 9.165937
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.087278 pixels
  Position = (485.0, 618.2) = 20 34 20.22 41 14 49.2
  Extent = 0.8 (0.5-1.5)" x 0.3 (0.2-0.6)", rotation angle = 68 (45-92) degrees
  Source counts = 13.4 +/- 3.9
  Background counts = 2.2
  Rate = 0.0005 +/- 0.0001
[Thu Oct 20 22:10:08 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:10:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:10:08 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 22:10:08 2011] Source does appear to be extended
[Thu Oct 20 22:10:08 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.86
[Thu Oct 20 22:14:52 2011] Not overwriting source region fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src26_src.reg
[Thu Oct 20 22:14:52 2011] Extracting stamp from image fullrun_ccd3_acisf10963_pi14-548_cl_sm2.00.img.gz, (448, 582) - (522, 655)
[Thu Oct 20 22:14:52 2011] Writing fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src26.gif
[Thu Oct 20 22:16:12 2011] ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src26_src.evt and ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Thu Oct 20 22:16:12 2011] Size of ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src26_src.evt.gz[events] = 15 counts
[Thu Oct 20 22:16:12 2011] Mean chipx,y = (660.07, 662.27)
[Thu Oct 20 22:16:12 2011] Mean tdetx,y = (4469.73, 3721.07)
[Thu Oct 20 22:16:12 2011] chipx,y range = (649.00-681.00, 646.00-679.00)
[Thu Oct 20 22:16:12 2011] Size of ../../acisf10963/products/events/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 15 counts
[Thu Oct 20 22:16:12 2011] ../../acisf10963/products/images/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src26_src.img and ../../acisf10963/products/images/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Thu Oct 20 22:16:12 2011] ../../acisf10963/products/spectra/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src26_src.pi and ../../acisf10963/products/spectra/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Thu Oct 20 22:16:12 2011] Not generating rmf since there are only 13 counts
[Thu Oct 20 22:16:15 2011] ../../acisf10963/products/lightcurves/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src26_src.lc and ../../acisf10963/products/lightcurves/fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Thu Oct 20 22:17:56 2011] 191.168
[Thu Oct 20 22:18:25 2011] Updating aperture counts using extracted products
[Thu Oct 20 22:18:25 2011] Error reading totcts from fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src26_src.pi.gz
[Thu Oct 20 22:18:26 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 22:18:26 2011] Using photon index=1.80, rate=0.000458, arf fullrun_ccd3_acisf10963_pi14-548_pass1_cl_src26.arf
[Thu Oct 20 22:18:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 22:18:26 2011] Updating source flux to 7.1e-15
[Thu Oct 20 22:18:43 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting