[Thu Oct 20 22:07:59 2011] Detection parameters:
  Position = (815.1, 128.5) = 20 34 45.75 41 14 39.4
  Extent = 0.5" x 0.5", rotation angle = 140 degrees
  Source counts = 96.4 +/- 9.9
  Background counts = 1.6
  Rate = 0.003 +/- 0.0003

[Thu Oct 20 22:08:00 2011] Off-axis axis estimate = 1.21'
[Thu Oct 20 22:09:05 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:05 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Oct 20 22:09:05 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.920
[Thu Oct 20 22:09:05 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Thu Oct 20 22:09:05 2011] fullrun_ccd2_acisf10963_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 20 22:09:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10963_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 22:09:05 2011] fullrun_ccd2_acisf10963_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 20 22:09:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10963_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 22:09:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10963_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10963_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:09:06 2011] fullrun_ccd2_acisf10963_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 20 22:09:06 2011] fullrun_ccd2_acisf10963_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 20 22:09:06 2011] Fit fullrun_ccd2_acisf10963_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 20 22:09:19 2011] Spatial fit model total counts = 99.328000, observed total counts = 99.000000
[Thu Oct 20 22:09:19 2011] Offset between fit and detection position for source 2 = 0.705028 pixels
[Thu Oct 20 22:09:19 2011] 99.477950 total counts/ 4.181750 bgd. counts: snr = 46.601141
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.705028 pixels
  Position = (815.6, 129.0) = 20 34 45.75 41 14 39.4
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 95.3 +/- 10.0
  Background counts = 4.2
  Rate = 0.003 +/- 0.0003
[Thu Oct 20 22:09:19 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:09:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:09:19 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 22:09:19 2011] Source does appear to be extended
[Thu Oct 20 22:09:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 22:09:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:50 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Thu Oct 20 22:09:50 2011] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.717
[Thu Oct 20 22:09:50 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.47"
[Thu Oct 20 22:09:50 2011] fullrun_ccd2_acisf10963_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 20 22:09:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10963_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 22:09:50 2011] fullrun_ccd2_acisf10963_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 20 22:09:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10963_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 22:09:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10963_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10963_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:09:51 2011] fullrun_ccd2_acisf10963_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 20 22:09:51 2011] fullrun_ccd2_acisf10963_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 20 22:09:51 2011] Fit fullrun_ccd2_acisf10963_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 20 22:10:04 2011] Spatial fit model total counts = 100.158000, observed total counts = 100.000000
[Thu Oct 20 22:10:04 2011] Offset between fit and detection position for source 2 = 0.005504 pixels
[Thu Oct 20 22:10:04 2011] 100.474500 total counts/ 6.116700 bgd. counts: snr = 38.152168
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.005504 pixels
  Position = (815.6, 129.1) = 20 34 45.75 41 14 39.4
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 94.4 +/- 10.0
  Background counts = 6.1
  Rate = 0.003 +/- 0.0003
[Thu Oct 20 22:10:04 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:10:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:10:04 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 22:10:04 2011] Source does appear to be extended
[Thu Oct 20 22:10:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 22:13:38 2011] Not overwriting source region fullrun_ccd2_acisf10963_pi14-548_pass1_cl_src2_src.reg
[Thu Oct 20 22:13:38 2011] Extracting stamp from image fullrun_ccd2_acisf10963_pi14-548_cl_sm2.00.img.gz, (795, 108) - (836, 150)
[Thu Oct 20 22:13:38 2011] Writing fullrun_ccd2_acisf10963_pi14-548_pass1_cl_src2.gif
[Thu Oct 20 22:13:41 2011] ../../acisf10963/products/events/fullrun_ccd2_acisf10963_pi14-548_pass1_cl_src2_src.evt and ../../acisf10963/products/events/fullrun_ccd2_acisf10963_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Thu Oct 20 22:13:41 2011] Size of ../../acisf10963/products/events/fullrun_ccd2_acisf10963_pi14-548_pass1_cl_src2_src.evt.gz[events] = 96 counts
[Thu Oct 20 22:13:41 2011] Mean chipx,y = (73.31, 898.22)
[Thu Oct 20 22:13:41 2011] Mean tdetx,y = (3959.22, 4012.69)
[Thu Oct 20 22:13:41 2011] chipx,y range = (53.00-88.00, 879.00-914.00)
[Thu Oct 20 22:13:41 2011] Size of ../../acisf10963/products/events/fullrun_ccd2_acisf10963_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 10 counts
[Thu Oct 20 22:13:41 2011] ../../acisf10963/products/images/fullrun_ccd2_acisf10963_pi14-548_pass1_cl_src2_src.img and ../../acisf10963/products/images/fullrun_ccd2_acisf10963_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Thu Oct 20 22:13:41 2011] ../../acisf10963/products/spectra/fullrun_ccd2_acisf10963_pi14-548_pass1_cl_src2_src.pi and ../../acisf10963/products/spectra/fullrun_ccd2_acisf10963_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Thu Oct 20 22:13:41 2011] Not generating rmf since there are only 94 counts
[Thu Oct 20 22:13:44 2011] ../../acisf10963/products/lightcurves/fullrun_ccd2_acisf10963_pi14-548_pass1_cl_src2_src.lc and ../../acisf10963/products/lightcurves/fullrun_ccd2_acisf10963_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Thu Oct 20 22:14:51 2011] 201.251
[Thu Oct 20 22:18:25 2011] Updating aperture counts using extracted products
[Thu Oct 20 22:18:25 2011] Error reading totcts from fullrun_ccd2_acisf10963_pi14-548_pass1_cl_src2_src.pi.gz
[Thu Oct 20 22:18:25 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 22:18:25 2011] Using photon index=1.80, rate=0.00321, arf fullrun_ccd2_acisf10963_pi14-548_pass1_cl_src2.arf
[Thu Oct 20 22:18:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 22:18:25 2011] Updating source flux to 4.7e-14
[Thu Oct 20 22:18:42 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct 20 22:18:43 2011] acisf10963/analysis//spectral/fullrun_ccd2_acisf10963_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete