[Thu Oct 20 22:07:57 2011] Detection parameters:
  Position = (393.0, 971.1) = 20 34 45.31 41 10 10.5
  Extent = 0.8" x 0.5", rotation angle = 90 degrees
  Source counts = 56.6 +/- 7.6
  Background counts = 1.4
  Rate = 0.002 +/- 0.0003

[Thu Oct 20 22:07:58 2011] Off-axis axis estimate = 4.13'
[Thu Oct 20 22:09:03 2011] Using EEF radius (= 0.87 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:03 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Thu Oct 20 22:09:03 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.778
[Thu Oct 20 22:09:03 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.87"
[Thu Oct 20 22:09:04 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass0_src5.ximg exists
[Thu Oct 20 22:09:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10963_pi14-548_cl_pass0_src5.csv
[Thu Oct 20 22:09:04 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass0_src5_1.ximg exists
[Thu Oct 20 22:09:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10963_pi14-548_cl_pass0_src5.csv
[Thu Oct 20 22:09:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10963_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10963_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:09:04 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Thu Oct 20 22:09:04 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Oct 20 22:09:04 2011] Fit fullrun_ccd1_acisf10963_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Oct 20 22:09:18 2011] Spatial fit model total counts = 57.955100, observed total counts = 58.000000
[Thu Oct 20 22:09:18 2011] Offset between fit and detection position for source 6 = 0.826119 pixels
[Thu Oct 20 22:09:18 2011] 58.035920 total counts/ 4.664220 bgd. counts: snr = 24.712775
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.826119 pixels
  Position = (393.6, 971.7) = 20 34 45.31 41 10 10.6
  Extent = 0.8 (0.6-0.9)", rotation angle = 0
  Source counts = 53.4 +/- 7.6
  Background counts = 4.7
  Rate = 0.002 +/- 0.0003
[Thu Oct 20 22:09:18 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:09:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:09:18 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 22:09:18 2011] Source does appear to be extended
[Thu Oct 20 22:09:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 22:09:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:48 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Thu Oct 20 22:09:48 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.956
[Thu Oct 20 22:09:48 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.76"
[Thu Oct 20 22:09:49 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass1_src5.ximg exists
[Thu Oct 20 22:09:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10963_pi14-548_cl_pass1_src5.csv
[Thu Oct 20 22:09:49 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass1_src5_1.ximg exists
[Thu Oct 20 22:09:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10963_pi14-548_cl_pass1_src5.csv
[Thu Oct 20 22:09:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10963_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10963_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:09:49 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Thu Oct 20 22:09:49 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Oct 20 22:09:49 2011] Fit fullrun_ccd1_acisf10963_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Oct 20 22:10:02 2011] Spatial fit model total counts = 57.648100, observed total counts = 58.000000
[Thu Oct 20 22:10:02 2011] Offset between fit and detection position for source 6 = 0.029170 pixels
[Thu Oct 20 22:10:02 2011] 57.690350 total counts/ 5.077350 bgd. counts: snr = 23.349335
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.029170 pixels
  Position = (393.6, 971.7) = 20 34 45.31 41 10 10.6
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 52.6 +/- 7.6
  Background counts = 5.1
  Rate = 0.002 +/- 0.0003
[Thu Oct 20 22:10:02 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:10:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:10:02 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 22:10:02 2011] Source does appear to be extended
[Thu Oct 20 22:10:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 22:11:52 2011] Not overwriting source region fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src6_src.reg
[Thu Oct 20 22:11:52 2011] Extracting stamp from image fullrun_ccd1_acisf10963_pi14-548_cl_sm2.00.img.gz, (360, 938) - (427, 1005)
[Thu Oct 20 22:11:52 2011] Writing fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src6.gif
[Thu Oct 20 22:12:03 2011] ../../acisf10963/products/events/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src6_src.evt and ../../acisf10963/products/events/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Thu Oct 20 22:12:03 2011] Size of ../../acisf10963/products/events/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src6_src.evt.gz[events] = 56 counts
[Thu Oct 20 22:12:03 2011] Mean chipx,y = (388.29, 915.93)
[Thu Oct 20 22:12:03 2011] Mean tdetx,y = (4216.07, 4495.29)
[Thu Oct 20 22:12:03 2011] chipx,y range = (371.00-407.00, 896.00-932.00)
[Thu Oct 20 22:12:03 2011] Size of ../../acisf10963/products/events/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 9 counts
[Thu Oct 20 22:12:03 2011] ../../acisf10963/products/images/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src6_src.img and ../../acisf10963/products/images/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Thu Oct 20 22:12:03 2011] ../../acisf10963/products/spectra/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src6_src.pi and ../../acisf10963/products/spectra/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Thu Oct 20 22:12:03 2011] Not generating rmf since there are only 52 counts
[Thu Oct 20 22:12:05 2011] ../../acisf10963/products/lightcurves/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src6_src.lc and ../../acisf10963/products/lightcurves/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Thu Oct 20 22:13:37 2011] 189.958
[Thu Oct 20 22:18:24 2011] Updating aperture counts using extracted products
[Thu Oct 20 22:18:24 2011] Error reading totcts from fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src6_src.pi.gz
[Thu Oct 20 22:18:24 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 22:18:24 2011] Using photon index=1.80, rate=0.00179, arf fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src6.arf
[Thu Oct 20 22:18:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 22:18:24 2011] Updating source flux to 2.8e-14
[Thu Oct 20 22:18:33 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting