[Thu Oct 20 22:07:57 2011] Detection parameters:
  Position = (256.3, 889.7) = 20 34 51.27 41 9 30.5
  Extent = 0.7" x 0.5", rotation angle = 138 degrees
  Source counts = 24.7 +/- 5.1
  Background counts = 1.3
  Rate = 0.0008 +/- 0.0002

[Thu Oct 20 22:07:58 2011] Off-axis axis estimate = 5.14'
[Thu Oct 20 22:09:03 2011] Using EEF radius (= 1.24 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:03 2011] Initial guess for spatial extent in simple fitting = 1.24"
[Thu Oct 20 22:09:03 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.992
[Thu Oct 20 22:09:03 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 1.24"
[Thu Oct 20 22:09:04 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass0_src9.ximg exists
[Thu Oct 20 22:09:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10963_pi14-548_cl_pass0_src9.csv
[Thu Oct 20 22:09:04 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass0_src9_1.ximg exists
[Thu Oct 20 22:09:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10963_pi14-548_cl_pass0_src9.csv
[Thu Oct 20 22:09:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10963_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10963_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:09:05 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Thu Oct 20 22:09:05 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Oct 20 22:09:05 2011] Fit fullrun_ccd1_acisf10963_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Oct 20 22:09:18 2011] Spatial fit model total counts = 39.252700, observed total counts = 42.000000
[Thu Oct 20 22:09:18 2011] Offset between fit and detection position for source 5 = 0.933188 pixels
[Thu Oct 20 22:09:18 2011] 38.179700 total counts/ 2.460200 bgd. counts: snr = 22.772996
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.933188 pixels
  Position = (255.4, 889.4) = 20 34 51.33 41 9 30.1
  Extent = 1.1 (0.7-1.3)", rotation angle = 0
  Source counts = 35.7 +/- 6.2
  Background counts = 2.5
  Rate = 0.001 +/- 0.0002
[Thu Oct 20 22:09:18 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:09:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:09:18 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 22:09:18 2011] Source does appear to be extended
[Thu Oct 20 22:09:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 22:09:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:48 2011] Initial guess for spatial extent in simple fitting = 1.13"
[Thu Oct 20 22:09:48 2011] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.798
[Thu Oct 20 22:09:48 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 1.13"
[Thu Oct 20 22:09:49 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass1_src9.ximg exists
[Thu Oct 20 22:09:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10963_pi14-548_cl_pass1_src9.csv
[Thu Oct 20 22:09:49 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass1_src9_1.ximg exists
[Thu Oct 20 22:09:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10963_pi14-548_cl_pass1_src9.csv
[Thu Oct 20 22:09:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10963_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10963_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:09:49 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Thu Oct 20 22:09:49 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Oct 20 22:09:49 2011] Fit fullrun_ccd1_acisf10963_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Oct 20 22:10:02 2011] Spatial fit model total counts = 38.143700, observed total counts = 42.000000
[Thu Oct 20 22:10:02 2011] Offset between fit and detection position for source 5 = 0.804716 pixels
[Thu Oct 20 22:10:02 2011] 36.674330 total counts/ 5.402330 bgd. counts: snr = 13.454424
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.804716 pixels
  Position = (256.0, 890.0) = 20 34 51.31 41 9 30.4
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 31.3 +/- 6.1
  Background counts = 5.4
  Rate = 0.001 +/- 0.0002
[Thu Oct 20 22:10:02 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:10:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:10:02 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 22:10:02 2011] Source does appear to be extended
[Thu Oct 20 22:10:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 22:11:52 2011] Not overwriting source region fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src5_src.reg
[Thu Oct 20 22:11:52 2011] Extracting stamp from image fullrun_ccd1_acisf10963_pi14-548_cl_sm2.00.img.gz, (214, 848) - (298, 932)
[Thu Oct 20 22:11:52 2011] Writing fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src5.gif
[Thu Oct 20 22:12:17 2011] ../../acisf10963/products/events/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src5_src.evt and ../../acisf10963/products/events/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Thu Oct 20 22:12:17 2011] Size of ../../acisf10963/products/events/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src5_src.evt.gz[events] = 39 counts
[Thu Oct 20 22:12:17 2011] Mean chipx,y = (527.59, 999.28)
[Thu Oct 20 22:12:17 2011] Mean tdetx,y = (4132.72, 4634.59)
[Thu Oct 20 22:12:17 2011] chipx,y range = (505.00-545.00, 981.00-1017.00)
[Thu Oct 20 22:12:17 2011] Size of ../../acisf10963/products/events/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 15 counts
[Thu Oct 20 22:12:17 2011] ../../acisf10963/products/images/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src5_src.img and ../../acisf10963/products/images/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Thu Oct 20 22:12:17 2011] ../../acisf10963/products/spectra/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src5_src.pi and ../../acisf10963/products/spectra/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Thu Oct 20 22:12:17 2011] Not generating rmf since there are only 31 counts
[Thu Oct 20 22:12:22 2011] ../../acisf10963/products/lightcurves/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src5_src.lc and ../../acisf10963/products/lightcurves/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Thu Oct 20 22:13:37 2011] 172.99
[Thu Oct 20 22:18:24 2011] Updating aperture counts using extracted products
[Thu Oct 20 22:18:24 2011] Error reading totcts from fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src5_src.pi.gz
[Thu Oct 20 22:18:24 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 22:18:24 2011] Using photon index=1.80, rate=0.00106, arf fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src5.arf
[Thu Oct 20 22:18:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 22:18:24 2011] Updating source flux to 1.8e-14
[Thu Oct 20 22:18:33 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting