[Thu Oct 20 22:07:57 2011] Detection parameters:
  Position = (795.0, 434.0) = 20 34 27.81 41 5 46.3
  Extent = 2.5" x 1.1", rotation angle = 148 degrees
  Source counts = 10.9 +/- 4.0
  Background counts = 5.1
  Rate = 0.0004 +/- 0.0001

[Thu Oct 20 22:07:58 2011] Off-axis axis estimate = 8.71'
[Thu Oct 20 22:09:03 2011] Using EEF radius (= 3.35 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:03 2011] Initial guess for spatial extent in simple fitting = 3.35"
[Thu Oct 20 22:09:03 2011] source mask rpix=6.8, npix_max = 213, mask sum = 196, frac = 0.917
[Thu Oct 20 22:09:03 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 3.35"
[Thu Oct 20 22:09:04 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass0_src23.ximg exists
[Thu Oct 20 22:09:04 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass0_src23_1.ximg exists
[Thu Oct 20 22:09:04 2011] Fit fullrun_ccd1_acisf10963_pi14-548_cl_pass0_src23 appears to have run properly
[Thu Oct 20 22:09:05 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Thu Oct 20 22:09:05 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Oct 20 22:09:05 2011] Fit fullrun_ccd1_acisf10963_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Oct 20 22:09:18 2011] Spatial fit model total counts = 21.923000, observed total counts = 22.000000
[Thu Oct 20 22:09:18 2011] Offset between fit and detection position for source 12 = 2.073234 pixels
[Thu Oct 20 22:09:18 2011] 22.034600 total counts/ 11.738500 bgd. counts: snr = 3.005152
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 2.073234 pixels
  Position = (793.1, 434.8) = 20 34 27.92 41 5 46.4
  Extent = 0.8" x 0.8", rotation angle = 0
  Source counts = 10.3 +/- 4.7
  Background counts = 11.7
  Rate = 0.0004 +/- 0.0002
[Thu Oct 20 22:09:18 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:09:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:09:18 2011] Assessing source extent using major
[Thu Oct 20 22:09:18 2011] Source does appear to be extended
[Thu Oct 20 22:09:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 22:09:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 22:09:48 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Thu Oct 20 22:09:48 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.825
[Thu Oct 20 22:09:48 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 0.84"
[Thu Oct 20 22:09:49 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass1_src22.ximg exists
[Thu Oct 20 22:09:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10963_pi14-548_cl_pass1_src22.csv
[Thu Oct 20 22:09:49 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass1_src22_1.ximg exists
[Thu Oct 20 22:09:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10963_pi14-548_cl_pass1_src22.csv
[Thu Oct 20 22:09:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10963_pi14-548_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10963_pi14-548_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:09:50 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass1_tfrozen_src22.ximg exists
[Thu Oct 20 22:09:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10963_pi14-548_cl_pass1_tfrozen_src22.csv
[Thu Oct 20 22:09:50 2011] fullrun_ccd1_acisf10963_pi14-548_cl_pass1_tfrozen_src22_1.ximg exists
[Thu Oct 20 22:09:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10963_pi14-548_cl_pass1_tfrozen_src22.csv
[Thu Oct 20 22:09:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10963_pi14-548_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10963_pi14-548_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 22:10:02 2011] Spatial fit model total counts = 9.668210, observed total counts = 11.000000
[Thu Oct 20 22:10:02 2011] Offset between fit and detection position for source 12 = 0.149329 pixels
[Thu Oct 20 22:10:02 2011] 9.763760 total counts/ 0.000000 bgd. counts: snr = 100607076711737.531250
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.149329 pixels
  Position = (793.2, 434.9) = 20 34 27.91 41 5 46.4
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 9.8 +/- 3.1
  Background counts = 0.0
  Rate = 0.0003 +/- 0.0001
[Thu Oct 20 22:10:02 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 22:10:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 22:10:02 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 22:10:02 2011] Source does appear to be extended
[Thu Oct 20 22:10:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 22:11:52 2011] Not overwriting source region fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src12_src.reg
[Thu Oct 20 22:11:52 2011] Extracting stamp from image fullrun_ccd1_acisf10963_pi14-548_cl_sm2.00.img.gz, (763, 405) - (824, 465)
[Thu Oct 20 22:11:52 2011] Writing fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src12.gif
[Thu Oct 20 22:13:05 2011] ../../acisf10963/products/events/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src12_src.evt and ../../acisf10963/products/events/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Thu Oct 20 22:13:06 2011] Size of ../../acisf10963/products/events/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src12_src.evt.gz[events] = 10 counts
[Thu Oct 20 22:13:06 2011] Mean chipx,y = (698.00, 316.50)
[Thu Oct 20 22:13:06 2011] Mean tdetx,y = (4815.50, 4805.00)
[Thu Oct 20 22:13:06 2011] chipx,y range = (697.00-699.00, 306.00-327.00)
[Thu Oct 20 22:13:06 2011] Size of ../../acisf10963/products/events/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 10 counts
[Thu Oct 20 22:13:06 2011] ../../acisf10963/products/images/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src12_src.img and ../../acisf10963/products/images/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Thu Oct 20 22:13:06 2011] ../../acisf10963/products/spectra/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src12_src.pi and ../../acisf10963/products/spectra/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Thu Oct 20 22:13:06 2011] Not generating rmf since there are only 9 counts
[Thu Oct 20 22:13:08 2011] ../../acisf10963/products/lightcurves/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src12_src.lc and ../../acisf10963/products/lightcurves/fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Thu Oct 20 22:13:37 2011] 167.872
[Thu Oct 20 22:18:24 2011] Updating aperture counts using extracted products
[Thu Oct 20 22:18:24 2011] Error reading totcts from fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src12_src.pi.gz
[Thu Oct 20 22:18:24 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 22:18:24 2011] Using photon index=1.80, rate=0.000332, arf fullrun_ccd1_acisf10963_pi14-548_pass1_cl_src12.arf
[Thu Oct 20 22:18:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 22:18:24 2011] Updating source flux to 5.7e-15
[Thu Oct 20 22:18:33 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting