[Mon Oct  3 04:56:14 2011] Detection parameters:
  Position = (748.8, 114.0) = 20 31 37.48 41 13 22.6
  Extent = 0.9" x 0.7", rotation angle = 91 degrees
  Source counts = 335.9 +/- 20.3
  Background counts = 76.1
  Rate = 0.01 +/- 0.0007

[Mon Oct  3 04:56:14 2011] Off-axis axis estimate = 11.34'
[Mon Oct  3 04:58:16 2011] Using EEF radius (= 5.73 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 04:58:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 04:58:16 2011] Initial guess for spatial extent in simple fitting = 5.73"
[Mon Oct  3 04:58:16 2011] source mask rpix=11.6, npix_max = 589, mask sum = 502, frac = 0.851
[Mon Oct  3 04:58:16 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 5.73"
[Mon Oct  3 04:58:18 2011] fullrun_ccd1_acisf10962_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct  3 04:58:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10962_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 04:58:18 2011] fullrun_ccd1_acisf10962_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct  3 04:58:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10962_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 04:58:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10962_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10962_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 04:58:18 2011] fullrun_ccd1_acisf10962_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct  3 04:58:18 2011] fullrun_ccd1_acisf10962_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct  3 04:58:18 2011] Fit fullrun_ccd1_acisf10962_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct  3 04:59:00 2011] Spatial fit model total counts = 690.684000, observed total counts = 674.000000
[Mon Oct  3 04:59:00 2011] Offset between fit and detection position for source 55 = 0.782138 pixels
[Mon Oct  3 04:59:00 2011] 690.860000 total counts/ 158.101000 bgd. counts: snr = 42.370490
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.782138 pixels
  Position = (749.0, 113.3) = 20 31 37.49 41 13 21.9
  Extent = 4.2 (3.9-4.6)", rotation angle = 0
  Source counts = 532.8 +/- 26.3
  Background counts = 158.1
  Rate = 0.02 +/- 0.0009
[Mon Oct  3 04:59:00 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 04:59:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 04:59:00 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 04:59:00 2011] Source does appear to be extended
[Mon Oct  3 04:59:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 04:59:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 04:59:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 04:59:51 2011] Initial guess for spatial extent in simple fitting = 4.21"
[Mon Oct  3 04:59:51 2011] source mask rpix=8.5, npix_max = 327, mask sum = 273, frac = 0.834
[Mon Oct  3 04:59:51 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.21"
[Mon Oct  3 04:59:52 2011] fullrun_ccd1_acisf10962_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct  3 04:59:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10962_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 04:59:52 2011] fullrun_ccd1_acisf10962_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct  3 04:59:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10962_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 04:59:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10962_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10962_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 04:59:52 2011] fullrun_ccd1_acisf10962_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct  3 04:59:52 2011] fullrun_ccd1_acisf10962_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct  3 04:59:52 2011] Fit fullrun_ccd1_acisf10962_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct  3 05:00:30 2011] Spatial fit model total counts = 640.118000, observed total counts = 638.000000
[Mon Oct  3 05:00:30 2011] Offset between fit and detection position for source 55 = 0.275181 pixels
[Mon Oct  3 05:00:30 2011] 640.348000 total counts/ 136.141000 bgd. counts: snr = 43.212999
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.275181 pixels
  Position = (749.1, 113.0) = 20 31 37.49 41 13 21.8
  Extent = 4.0 (3.6-4.3)", rotation angle = 0
  Source counts = 504.2 +/- 25.3
  Background counts = 136.1
  Rate = 0.02 +/- 0.0009
[Mon Oct  3 05:00:30 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 05:00:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 05:00:30 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 05:00:30 2011] Source does appear to be extended
[Mon Oct  3 05:00:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 05:03:21 2011] Not overwriting source region fullrun_ccd1_acisf10962_pi14-548_pass1_cl_src55_src.reg
[Mon Oct  3 05:03:21 2011] Extracting stamp from image fullrun_ccd1_acisf10962_pi14-548_cl_sm2.00.img.gz, (568, 0) - (930, 294)
[Mon Oct  3 05:03:21 2011] Writing fullrun_ccd1_acisf10962_pi14-548_pass1_cl_src55.gif
[Mon Oct  3 05:03:25 2011] ../../acisf10962/products/events/fullrun_ccd1_acisf10962_pi14-548_pass1_cl_src55_src.evt and ../../acisf10962/products/events/fullrun_ccd1_acisf10962_pi14-548_pass1_cl_src55_bgd.evt exist, delete to re-create
[Mon Oct  3 05:03:25 2011] Size of ../../acisf10962/products/events/fullrun_ccd1_acisf10962_pi14-548_pass1_cl_src55_src.evt.gz[events] = 612 counts
[Mon Oct  3 05:03:25 2011] Mean chipx,y = (1000.91, 186.71)
[Mon Oct  3 05:03:25 2011] Mean tdetx,y = (4945.29, 5107.91)
[Mon Oct  3 05:03:25 2011] chipx,y range = (959.00-1023.00, 143.00-230.00)
[Mon Oct  3 05:03:25 2011] Size of ../../acisf10962/products/events/fullrun_ccd1_acisf10962_pi14-548_pass1_cl_src55_bgd.evt.gz[events] = 292 counts
[Mon Oct  3 05:03:25 2011] ../../acisf10962/products/images/fullrun_ccd1_acisf10962_pi14-548_pass1_cl_src55_src.img and ../../acisf10962/products/images/fullrun_ccd1_acisf10962_pi14-548_pass1_cl_src55_bgd.img exist, delete to re-create
[Mon Oct  3 05:03:25 2011] ../../acisf10962/products/spectra/fullrun_ccd1_acisf10962_pi14-548_pass1_cl_src55_src.pi and ../../acisf10962/products/spectra/fullrun_ccd1_acisf10962_pi14-548_pass1_cl_src55_bgd.pi exist, delete to re-create
[Mon Oct  3 05:03:28 2011] ../../acisf10962/products/lightcurves/fullrun_ccd1_acisf10962_pi14-548_pass1_cl_src55_src.lc and ../../acisf10962/products/lightcurves/fullrun_ccd1_acisf10962_pi14-548_pass1_cl_src55_bgd.lc exist, delete to re-create
[Mon Oct  3 05:06:09 2011] Keeping rmf generated by specextract
[Mon Oct  3 05:06:09 2011] 146.002
[Mon Oct  3 05:13:20 2011] Updating aperture counts using extracted products
[Mon Oct  3 05:13:20 2011] Error reading totcts from fullrun_ccd1_acisf10962_pi14-548_pass1_cl_src55_src.pi.gz
[Mon Oct  3 05:13:20 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 05:13:20 2011] Using photon index=1.80, rate=0.0172, arf fullrun_ccd1_acisf10962_pi14-548_pass1_cl_src55.arf
[Mon Oct  3 05:13:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 05:13:20 2011] Updating source flux to 3.5e-13
[Mon Oct  3 05:13:48 2011] Reading fit data from acisf10962/analysis//spectral/fullrun_ccd1_acisf10962_pi14-548_pass1_cl_src55_pl.csv
[Mon Oct  3 05:13:48 2011] Spectral fit parameter nH value = 1.06839e+22
[Mon Oct  3 05:13:48 2011] Spectral fit parameter PhoIndex value = 3.94815
[Mon Oct  3 05:13:48 2011] Failed to get F(0.3-8.0) from acisf10962/analysis//spectral/fullrun_ccd1_acisf10962_pi14-548_pass1_cl_src55_pl.csv, possibly due to different flux energy range selected
[Mon Oct  3 05:13:48 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 05:13:48 2011] Using Nh = 1.1e+22, photon index=3.95, rate=0.0172, arf fullrun_ccd1_acisf10962_pi14-548_pass1_cl_src55.arf
[Mon Oct  3 05:13:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 05:13:48 2011] Updating source flux to 1.7e-13