[Mon Oct  3 04:56:06 2011] Detection parameters:
  Position = (302.0, 602.7) = 20 32 37.75 41 21 19.0
  Extent = 1.4" x 0.8", rotation angle = 128 degrees
  Source counts = 26.7 +/- 6.6
  Background counts = 16.3
  Rate = 0.0009 +/- 0.0002

[Mon Oct  3 04:56:07 2011] Off-axis axis estimate = 9.92'
[Mon Oct  3 04:58:08 2011] Using EEF radius (= 4.36 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 04:58:08 2011] Initial guess for spatial extent in simple fitting = 4.36"
[Mon Oct  3 04:58:08 2011] source mask rpix=8.9, npix_max = 350, mask sum = 330, frac = 0.942
[Mon Oct  3 04:58:08 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 4.36"
[Mon Oct  3 04:58:10 2011] fullrun_ccd0_acisf10962_pi14-548_cl_pass0_src29.ximg exists
[Mon Oct  3 04:58:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10962_pi14-548_cl_pass0_src29.csv
[Mon Oct  3 04:58:10 2011] fullrun_ccd0_acisf10962_pi14-548_cl_pass0_src29_1.ximg exists
[Mon Oct  3 04:58:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10962_pi14-548_cl_pass0_src29.csv
[Mon Oct  3 04:58:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10962_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10962_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 04:58:16 2011] fullrun_ccd0_acisf10962_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Mon Oct  3 04:58:16 2011] fullrun_ccd0_acisf10962_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Oct  3 04:58:16 2011] Fit fullrun_ccd0_acisf10962_pi14-548_cl_pass0_tfrozen_src29 appears to have run properly
[Mon Oct  3 04:58:55 2011] Spatial fit model total counts = 100.774000, observed total counts = 96.000000
[Mon Oct  3 04:58:55 2011] Offset between fit and detection position for source 52 = 4.165661 pixels
[Mon Oct  3 04:58:55 2011] 101.396200 total counts/ 51.921000 bgd. counts: snr = 6.866193
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 4.165661 pixels
  Position = (305.2, 605.4) = 20 32 37.64 41 21 20.1
  Extent = 5.0 (3.5-7.0)", rotation angle = 0
  Source counts = 49.5 +/- 10.1
  Background counts = 51.9
  Rate = 0.002 +/- 0.0003
[Mon Oct  3 04:58:55 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 04:58:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 04:58:55 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 04:58:55 2011] Source does appear to be extended
[Mon Oct  3 04:58:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 04:59:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 04:59:41 2011] Initial guess for spatial extent in simple fitting = 5.02"
[Mon Oct  3 04:59:41 2011] source mask rpix=10.2, npix_max = 458, mask sum = 422, frac = 0.920
[Mon Oct  3 04:59:41 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 5.02"
[Mon Oct  3 04:59:50 2011] fullrun_ccd0_acisf10962_pi14-548_cl_pass1_src28.ximg exists
[Mon Oct  3 04:59:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10962_pi14-548_cl_pass1_src28.csv
[Mon Oct  3 04:59:50 2011] fullrun_ccd0_acisf10962_pi14-548_cl_pass1_src28_1.ximg exists
[Mon Oct  3 04:59:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10962_pi14-548_cl_pass1_src28.csv
[Mon Oct  3 04:59:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10962_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10962_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 04:59:51 2011] fullrun_ccd0_acisf10962_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Mon Oct  3 04:59:51 2011] fullrun_ccd0_acisf10962_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Mon Oct  3 04:59:51 2011] Fit fullrun_ccd0_acisf10962_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Mon Oct  3 05:00:27 2011] Spatial fit model total counts = 127.847000, observed total counts = 123.000000
[Mon Oct  3 05:00:27 2011] Offset between fit and detection position for source 52 = 0.151849 pixels
[Mon Oct  3 05:00:27 2011] 128.722500 total counts/ 83.722800 bgd. counts: snr = 4.917991
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.151849 pixels
  Position = (305.2, 605.5) = 20 32 37.64 41 21 20.1
  Extent = 4.7 (3.4-6.6)", rotation angle = 0
  Source counts = 45.0 +/- 11.3
  Background counts = 83.7
  Rate = 0.002 +/- 0.0004
[Mon Oct  3 05:00:27 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 05:00:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 05:00:27 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 05:00:27 2011] Source does appear to be extended
[Mon Oct  3 05:00:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 05:01:08 2011] Not overwriting source region fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src52_src.reg
[Mon Oct  3 05:01:08 2011] Extracting stamp from image fullrun_ccd0_acisf10962_pi14-548_cl_sm2.00.img.gz, (91, 391) - (519, 820)
[Mon Oct  3 05:01:08 2011] Writing fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src52.gif
[Mon Oct  3 05:03:03 2011] ../../acisf10962/products/events/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src52_src.evt and ../../acisf10962/products/events/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src52_bgd.evt exist, delete to re-create
[Mon Oct  3 05:03:03 2011] Size of ../../acisf10962/products/events/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src52_src.evt.gz[events] = 95 counts
[Mon Oct  3 05:03:03 2011] Mean chipx,y = (256.18, 205.02)
[Mon Oct  3 05:03:03 2011] Mean tdetx,y = (3266.02, 4875.82)
[Mon Oct  3 05:03:03 2011] chipx,y range = (206.00-300.00, 157.00-253.00)
[Mon Oct  3 05:03:03 2011] Size of ../../acisf10962/products/events/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src52_bgd.evt.gz[events] = 750 counts
[Mon Oct  3 05:03:03 2011] ../../acisf10962/products/images/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src52_src.img and ../../acisf10962/products/images/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src52_bgd.img exist, delete to re-create
[Mon Oct  3 05:03:03 2011] ../../acisf10962/products/spectra/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src52_src.pi and ../../acisf10962/products/spectra/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src52_bgd.pi exist, delete to re-create
[Mon Oct  3 05:03:03 2011] Not generating rmf since there are only 44 counts
[Mon Oct  3 05:03:06 2011] ../../acisf10962/products/lightcurves/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src52_src.lc and ../../acisf10962/products/lightcurves/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src52_bgd.lc exist, delete to re-create
[Mon Oct  3 05:03:21 2011] 152.167
[Mon Oct  3 05:13:19 2011] Updating aperture counts using extracted products
[Mon Oct  3 05:13:19 2011] Error reading totcts from fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src52_src.pi.gz
[Mon Oct  3 05:13:20 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 05:13:20 2011] Using photon index=1.80, rate=0.00153, arf fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src52.arf
[Mon Oct  3 05:13:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 05:13:20 2011] Updating source flux to 2.9e-14
[Mon Oct  3 05:13:34 2011] Source 52 has fewer than 100.000000 counts, skipping spectral fitting