[Mon Oct  3 04:56:04 2011] Detection parameters:
  Position = (392.7, 818.5) = 20 32 33.81 41 23 5.3
  Extent = 4.0" x 1.9", rotation angle = 10 degrees
  Source counts = 33.8 +/- 7.1
  Background counts = 17.2
  Rate = 0.001 +/- 0.0002

[Mon Oct  3 04:56:07 2011] Off-axis axis estimate = 8.76'
[Mon Oct  3 04:58:08 2011] Using EEF radius (= 3.39 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 04:58:08 2011] Initial guess for spatial extent in simple fitting = 3.39"
[Mon Oct  3 04:58:08 2011] source mask rpix=6.9, npix_max = 218, mask sum = 209, frac = 0.957
[Mon Oct  3 04:58:08 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 3.39"
[Mon Oct  3 04:58:09 2011] fullrun_ccd0_acisf10962_pi14-548_cl_pass0_src19.ximg exists
[Mon Oct  3 04:58:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10962_pi14-548_cl_pass0_src19.csv
[Mon Oct  3 04:58:09 2011] fullrun_ccd0_acisf10962_pi14-548_cl_pass0_src19_1.ximg exists
[Mon Oct  3 04:58:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10962_pi14-548_cl_pass0_src19.csv
[Mon Oct  3 04:58:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10962_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10962_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 04:58:13 2011] fullrun_ccd0_acisf10962_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Mon Oct  3 04:58:16 2011] fullrun_ccd0_acisf10962_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Oct  3 04:58:16 2011] Fit fullrun_ccd0_acisf10962_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Mon Oct  3 04:58:55 2011] Spatial fit model total counts = 83.362600, observed total counts = 83.000000
[Mon Oct  3 04:58:55 2011] Offset between fit and detection position for source 29 = 0.781871 pixels
[Mon Oct  3 04:58:55 2011] 83.170600 total counts/ 63.164100 bgd. counts: snr = 2.517306
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.781871 pixels
  Position = (391.9, 818.6) = 20 32 33.87 41 23 5.1
  Extent = 1.1 (0.8-2.0)", rotation angle = 0
  Source counts = 20.0 +/- 9.1
  Background counts = 63.2
  Rate = 0.0007 +/- 0.0003
[Mon Oct  3 04:58:55 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 04:58:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 04:58:55 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 04:58:55 2011] Source does appear to be extended
[Mon Oct  3 04:58:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 04:59:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 04:59:41 2011] Initial guess for spatial extent in simple fitting = 1.12"
[Mon Oct  3 04:59:41 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.972
[Mon Oct  3 04:59:41 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 1.12"
[Mon Oct  3 04:59:50 2011] fullrun_ccd0_acisf10962_pi14-548_cl_pass1_src18.ximg exists
[Mon Oct  3 04:59:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10962_pi14-548_cl_pass1_src18.csv
[Mon Oct  3 04:59:50 2011] fullrun_ccd0_acisf10962_pi14-548_cl_pass1_src18_1.ximg exists
[Mon Oct  3 04:59:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10962_pi14-548_cl_pass1_src18.csv
[Mon Oct  3 04:59:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10962_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10962_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 04:59:51 2011] fullrun_ccd0_acisf10962_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Mon Oct  3 04:59:51 2011] fullrun_ccd0_acisf10962_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Oct  3 04:59:51 2011] Fit fullrun_ccd0_acisf10962_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Mon Oct  3 05:00:27 2011] Spatial fit model total counts = 32.966300, observed total counts = 34.000000
[Mon Oct  3 05:00:27 2011] Offset between fit and detection position for source 29 = 0.418627 pixels
[Mon Oct  3 05:00:27 2011] 33.201500 total counts/ 16.142000 bgd. counts: snr = 4.246075
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.418627 pixels
  Position = (391.6, 818.3) = 20 32 33.88 41 23 4.9
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 17.1 +/- 5.8
  Background counts = 16.1
  Rate = 0.0006 +/- 0.0002
[Mon Oct  3 05:00:27 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 05:00:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 05:00:27 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 05:00:27 2011] Source does appear to be extended
[Mon Oct  3 05:00:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 05:01:08 2011] Not overwriting source region fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src29_src.reg
[Mon Oct  3 05:01:08 2011] Extracting stamp from image fullrun_ccd0_acisf10962_pi14-548_cl_sm2.00.img.gz, (346, 772) - (438, 864)
[Mon Oct  3 05:01:08 2011] Writing fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src29.gif
[Mon Oct  3 05:02:13 2011] ../../acisf10962/products/events/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src29_src.evt and ../../acisf10962/products/events/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Mon Oct  3 05:02:13 2011] Size of ../../acisf10962/products/events/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src29_src.evt.gz[events] = 24 counts
[Mon Oct  3 05:02:13 2011] Mean chipx,y = (483.08, 187.29)
[Mon Oct  3 05:02:13 2011] Mean tdetx,y = (3248.29, 4648.92)
[Mon Oct  3 05:02:13 2011] chipx,y range = (462.00-501.00, 168.00-205.00)
[Mon Oct  3 05:02:13 2011] Size of ../../acisf10962/products/events/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 40 counts
[Mon Oct  3 05:02:13 2011] ../../acisf10962/products/images/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src29_src.img and ../../acisf10962/products/images/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Mon Oct  3 05:02:13 2011] ../../acisf10962/products/spectra/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src29_src.pi and ../../acisf10962/products/spectra/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src29_bgd.pi exist, delete to re-create
[Mon Oct  3 05:02:13 2011] Not generating rmf since there are only 17 counts
[Mon Oct  3 05:02:16 2011] ../../acisf10962/products/lightcurves/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src29_src.lc and ../../acisf10962/products/lightcurves/fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Mon Oct  3 05:03:21 2011] 162.48
[Mon Oct  3 05:13:19 2011] Updating aperture counts using extracted products
[Mon Oct  3 05:13:19 2011] Error reading totcts from fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src29_src.pi.gz
[Mon Oct  3 05:13:20 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 05:13:20 2011] Using photon index=1.80, rate=0.000581, arf fullrun_ccd0_acisf10962_pi14-548_pass1_cl_src29.arf
[Mon Oct  3 05:13:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 05:13:20 2011] Updating source flux to 1.1e-14
[Mon Oct  3 05:13:34 2011] Source 29 has fewer than 100.000000 counts, skipping spectral fitting