[Mon Oct 24 22:36:22 2011] Detection parameters: Position = (762.3, 997.5) = 20 32 52.38 41 10 29.8 Extent = 1.7" x 0.7", rotation angle = 83 degrees Source counts = 15.6 +/- 4.6 Background counts = 5.4 Rate = 0.0005 +/- 0.0002 [Mon Oct 24 22:36:25 2011] Off-axis axis estimate = 6.99' [Mon Oct 24 22:38:02 2011] Using EEF radius (= 2.17 ")to estimate initial spatial extent for simple fitting [Mon Oct 24 22:38:02 2011] Initial guess for spatial extent in simple fitting = 2.17" [Mon Oct 24 22:38:02 2011] source mask rpix=4.4, npix_max = 96, mask sum = 90, frac = 0.932 [Mon Oct 24 22:38:02 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 2.17" [Mon Oct 24 22:38:04 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src41.ximg exists [Mon Oct 24 22:38:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src41.csv [Mon Oct 24 22:38:04 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src41_1.ximg exists [Mon Oct 24 22:38:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src41.csv [Mon Oct 24 22:38:04 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src41_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Oct 24 22:38:06 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_tfrozen_src41.ximg exists [Mon Oct 24 22:38:06 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_tfrozen_src41_1.ximg exists [Mon Oct 24 22:38:06 2011] Fit fullrun_ccd3_acisf10961_pi14-548_cl_pass0_tfrozen_src41 appears to have run properly [Mon Oct 24 22:38:37 2011] Spatial fit model total counts = 27.502000, observed total counts = 32.000000 [Mon Oct 24 22:38:37 2011] Offset between fit and detection position for source 50 = 3.085381 pixels [Mon Oct 24 22:38:37 2011] 27.493420 total counts/ 25.873700 bgd. counts: snr = 0.318428 Spatial fit parameters: Offset between fit and detection position for source 50 = 3.085381 pixels Position = (764.2, 1000.0) = 20 32 52.32 41 10 30.7 Extent = 1.5" x 1.5", rotation angle = 0 Source counts = 1.6 +/- 5.2 Background counts = 25.9 Rate = 5e-05 +/- 0.0002 Deleting source due to low Poisson probability