[Mon Oct 24 22:36:22 2011] Detection parameters:
  Position = (621.6, 409.6) = 20 32 58.54 41 5 40.6
  Extent = 0.8" x 0.5", rotation angle = 71 degrees
  Source counts = 12.7 +/- 3.9
  Background counts = 2.3
  Rate = 0.0004 +/- 0.0001

[Mon Oct 24 22:36:25 2011] Off-axis axis estimate = 4.95'
[Mon Oct 24 22:38:02 2011] Using EEF radius (= 1.16 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 22:38:02 2011] Initial guess for spatial extent in simple fitting = 1.16"
[Mon Oct 24 22:38:02 2011] source mask rpix=2.4, npix_max = 32, mask sum = 25, frac = 0.763
[Mon Oct 24 22:38:02 2011] Giving source the simple spatial ID 48 for pass 0, mean size = 1.16"
[Mon Oct 24 22:38:05 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src48.ximg exists
[Mon Oct 24 22:38:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src48.csv
[Mon Oct 24 22:38:05 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src48_1.ximg exists
[Mon Oct 24 22:38:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src48.csv
[Mon Oct 24 22:38:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 22:38:06 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_tfrozen_src48.ximg exists
[Mon Oct 24 22:38:06 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_tfrozen_src48_1.ximg exists
[Mon Oct 24 22:38:06 2011] Fit fullrun_ccd3_acisf10961_pi14-548_cl_pass0_tfrozen_src48 appears to have run properly
[Mon Oct 24 22:38:37 2011] Spatial fit model total counts = 20.771300, observed total counts = 21.000000
[Mon Oct 24 22:38:37 2011] Offset between fit and detection position for source 43 = 1.832118 pixels
[Mon Oct 24 22:38:37 2011] 20.273200 total counts/ 10.092900 bgd. counts: snr = 3.204443
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 1.832118 pixels
  Position = (622.6, 411.1) = 20 32 58.52 41 5 41.1
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 10.2 +/- 4.5
  Background counts = 10.1
  Rate = 0.0003 +/- 0.0002
[Mon Oct 24 22:38:37 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 22:38:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 22:38:37 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 22:38:37 2011] Source does appear to be extended
[Mon Oct 24 22:38:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 22:39:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 22:39:24 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Mon Oct 24 22:39:24 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.930
[Mon Oct 24 22:39:24 2011] Giving source the simple spatial ID 46 for pass 1, mean size = 0.52"
[Mon Oct 24 22:39:26 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src46.ximg exists
[Mon Oct 24 22:39:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src46.csv
[Mon Oct 24 22:39:26 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src46_1.ximg exists
[Mon Oct 24 22:39:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src46.csv
[Mon Oct 24 22:39:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 22:39:27 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass1_tfrozen_src46.ximg exists
[Mon Oct 24 22:39:27 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass1_tfrozen_src46_1.ximg exists
[Mon Oct 24 22:39:27 2011] Fit fullrun_ccd3_acisf10961_pi14-548_cl_pass1_tfrozen_src46 appears to have run properly
[Mon Oct 24 22:39:59 2011] Spatial fit model total counts = 22.971900, observed total counts = 23.000000
[Mon Oct 24 22:39:59 2011] Offset between fit and detection position for source 43 = 0.046747 pixels
[Mon Oct 24 22:39:59 2011] 22.041680 total counts/ 12.094500 bgd. counts: snr = 2.860263
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.046747 pixels
  Position = (622.6, 411.2) = 20 32 58.52 41 5 41.2
  Extent = 0.5 (0.4-0.9)", rotation angle = 0
  Source counts = 9.9 +/- 4.7
  Background counts = 12.1
  Rate = 0.0003 +/- 0.0002
[Mon Oct 24 22:39:59 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 22:39:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 22:39:59 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 22:39:59 2011] Source does appear to be extended
[Mon Oct 24 22:39:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 22:47:07 2011] Not overwriting source region fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src43_src.reg
[Mon Oct 24 22:47:07 2011] Extracting stamp from image fullrun_ccd3_acisf10961_pi14-548_cl_sm2.00.img.gz, (600, 388) - (645, 434)
[Mon Oct 24 22:47:07 2011] Writing fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src43.gif
[Mon Oct 24 22:49:21 2011] ../../acisf10961/products/events/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src43_src.evt and ../../acisf10961/products/events/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src43_bgd.evt exist, delete to re-create
[Mon Oct 24 22:49:21 2011] Size of ../../acisf10961/products/events/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src43_src.evt.gz[events] = 13 counts
[Mon Oct 24 22:49:21 2011] Mean chipx,y = (804.54, 440.54)
[Mon Oct 24 22:49:21 2011] Mean tdetx,y = (4691.46, 3865.54)
[Mon Oct 24 22:49:21 2011] chipx,y range = (787.00-817.00, 421.00-454.00)
[Mon Oct 24 22:49:21 2011] Size of ../../acisf10961/products/events/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src43_bgd.evt.gz[events] = 11 counts
[Mon Oct 24 22:49:21 2011] ../../acisf10961/products/images/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src43_src.img and ../../acisf10961/products/images/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src43_bgd.img exist, delete to re-create
[Mon Oct 24 22:49:21 2011] ../../acisf10961/products/spectra/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src43_src.pi and ../../acisf10961/products/spectra/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src43_bgd.pi exist, delete to re-create
[Mon Oct 24 22:49:21 2011] Not generating rmf since there are only 9 counts
[Mon Oct 24 22:49:24 2011] ../../acisf10961/products/lightcurves/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src43_src.lc and ../../acisf10961/products/lightcurves/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src43_bgd.lc exist, delete to re-create
[Mon Oct 24 22:51:26 2011] 188.802
[Mon Oct 24 22:52:07 2011] Updating aperture counts using extracted products
[Mon Oct 24 22:52:07 2011] Error reading totcts from fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src43_src.pi.gz
[Mon Oct 24 22:52:08 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 22:52:08 2011] Using photon index=1.80, rate=0.000334, arf fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src43.arf
[Mon Oct 24 22:52:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 22:52:08 2011] Updating source flux to 5.3e-15
[Mon Oct 24 22:52:46 2011] Source 43 has fewer than 100.000000 counts, skipping spectral fitting