[Mon Oct 24 22:36:17 2011] Detection parameters:
  Position = (433.0, 1181.1) = 20 33 6.72 41 12 0.3
  Extent = 2.0" x 1.3", rotation angle = 166 degrees
  Source counts = 23.6 +/- 6.0
  Background counts = 12.4
  Rate = 0.0008 +/- 0.0002

[Mon Oct 24 22:36:25 2011] Off-axis axis estimate = 6.09'
[Mon Oct 24 22:38:02 2011] Using EEF radius (= 1.68 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 22:38:02 2011] Initial guess for spatial extent in simple fitting = 1.68"
[Mon Oct 24 22:38:02 2011] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.049
[Mon Oct 24 22:38:02 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 1.68"
[Mon Oct 24 22:38:04 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src22.ximg exists
[Mon Oct 24 22:38:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src22.csv
[Mon Oct 24 22:38:04 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src22_1.ximg exists
[Mon Oct 24 22:38:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src22.csv
[Mon Oct 24 22:38:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 22:38:05 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Mon Oct 24 22:38:05 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Mon Oct 24 22:38:05 2011] Fit fullrun_ccd3_acisf10961_pi14-548_cl_pass0_tfrozen_src22 appears to have run properly
[Mon Oct 24 22:38:37 2011] Spatial fit model total counts = 35.690100, observed total counts = 36.000000
[Mon Oct 24 22:38:37 2011] Offset between fit and detection position for source 20 = 2.581537 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.581537 pixels
  Position = (435.5, 1181.4) = 20 33 6.63 41 12 0.2
  Extent = 2.3 (1.7-2.8)", rotation angle = 0
  Source counts = 35.1 +/- 5.9
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Mon Oct 24 22:38:37 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 22:38:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 22:38:37 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 22:38:37 2011] Source does appear to be extended
[Mon Oct 24 22:38:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 22:39:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 22:39:24 2011] Initial guess for spatial extent in simple fitting = 2.33"
[Mon Oct 24 22:39:24 2011] source mask rpix=4.7, npix_max = 110, mask sum = 121, frac = 1.099
[Mon Oct 24 22:39:24 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 2.33"
[Mon Oct 24 22:39:26 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src22.ximg exists
[Mon Oct 24 22:39:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src22.csv
[Mon Oct 24 22:39:26 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src22_1.ximg exists
[Mon Oct 24 22:39:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src22.csv
[Mon Oct 24 22:39:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 22:39:27 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass1_tfrozen_src22.ximg exists
[Mon Oct 24 22:39:27 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass1_tfrozen_src22_1.ximg exists
[Mon Oct 24 22:39:27 2011] Fit fullrun_ccd3_acisf10961_pi14-548_cl_pass1_tfrozen_src22 appears to have run properly
[Mon Oct 24 22:39:59 2011] Spatial fit model total counts = 53.236500, observed total counts = 53.000000
[Mon Oct 24 22:39:59 2011] Offset between fit and detection position for source 20 = 1.229377 pixels
[Mon Oct 24 22:39:59 2011] 54.396800 total counts/ 32.956700 bgd. counts: snr = 3.734693
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.229377 pixels
  Position = (434.3, 1181.2) = 20 33 6.69 41 12 0.1
  Extent = 1.7 (1.2-2.8)", rotation angle = 0
  Source counts = 21.4 +/- 7.4
  Background counts = 33.0
  Rate = 0.0007 +/- 0.0002
[Mon Oct 24 22:39:59 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 22:39:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 22:39:59 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 22:39:59 2011] Source does appear to be extended
[Mon Oct 24 22:39:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 22:47:06 2011] Not overwriting source region fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src20_src.reg
[Mon Oct 24 22:47:06 2011] Extracting stamp from image fullrun_ccd3_acisf10961_pi14-548_cl_sm2.00.img.gz, (355, 1102) - (514, 1261)
[Mon Oct 24 22:47:06 2011] Writing fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src20.gif
[Mon Oct 24 22:48:10 2011] ../../acisf10961/products/events/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src20_src.evt and ../../acisf10961/products/events/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Mon Oct 24 22:48:10 2011] Size of ../../acisf10961/products/events/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src20_src.evt.gz[events] = 47 counts
[Mon Oct 24 22:48:10 2011] Mean chipx,y = (202.98, 961.26)
[Mon Oct 24 22:48:10 2011] Mean tdetx,y = (4170.74, 3263.98)
[Mon Oct 24 22:48:10 2011] chipx,y range = (173.00-226.00, 939.00-985.00)
[Mon Oct 24 22:48:10 2011] Size of ../../acisf10961/products/events/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 236 counts
[Mon Oct 24 22:48:10 2011] ../../acisf10961/products/images/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src20_src.img and ../../acisf10961/products/images/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Mon Oct 24 22:48:10 2011] ../../acisf10961/products/spectra/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src20_src.pi and ../../acisf10961/products/spectra/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Mon Oct 24 22:48:10 2011] Not generating rmf since there are only 21 counts
[Mon Oct 24 22:48:13 2011] ../../acisf10961/products/lightcurves/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src20_src.lc and ../../acisf10961/products/lightcurves/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Mon Oct 24 22:51:25 2011] 172.39
[Mon Oct 24 22:52:06 2011] Updating aperture counts using extracted products
[Mon Oct 24 22:52:06 2011] Error reading totcts from fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src20_src.pi.gz
[Mon Oct 24 22:52:07 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 22:52:07 2011] Using photon index=1.80, rate=0.00072, arf fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src20.arf
[Mon Oct 24 22:52:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 22:52:07 2011] Updating source flux to 1.2e-14
[Mon Oct 24 22:52:46 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting