[Mon Oct 24 22:36:16 2011] Detection parameters:
  Position = (901.4, 1073.8) = 20 32 46.31 41 11 7.2
  Extent = 3.3" x 2.2", rotation angle = 135 degrees
  Source counts = 514.2 +/- 24.2
  Background counts = 71.8
  Rate = 0.02 +/- 0.0008

[Mon Oct 24 22:36:25 2011] Off-axis axis estimate = 8.28'
[Mon Oct 24 22:38:02 2011] Using EEF radius (= 3.03 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 22:38:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 22:38:02 2011] Initial guess for spatial extent in simple fitting = 3.03"
[Mon Oct 24 22:38:02 2011] source mask rpix=6.2, npix_max = 177, mask sum = 169, frac = 0.951
[Mon Oct 24 22:38:02 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.03"
[Mon Oct 24 22:38:04 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 24 22:38:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 22:38:04 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 24 22:38:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 22:38:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 22:38:05 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 24 22:38:05 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 24 22:38:05 2011] Fit fullrun_ccd3_acisf10961_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 24 22:38:37 2011] Spatial fit model total counts = 581.000000, observed total counts = 581.000000
[Mon Oct 24 22:38:37 2011] Offset between fit and detection position for source 2 = 0.888488 pixels
[Mon Oct 24 22:38:37 2011] 581.278400 total counts/ 94.415400 bgd. counts: snr = 50.105494
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.888488 pixels
  Position = (901.5, 1074.7) = 20 32 46.33 41 11 7.4
  Extent = 2.6 (2.4-2.8)", rotation angle = 0
  Source counts = 486.9 +/- 24.1
  Background counts = 94.4
  Rate = 0.02 +/- 0.0008
[Mon Oct 24 22:38:37 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 22:38:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 22:38:37 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 22:38:37 2011] Source does appear to be extended
[Mon Oct 24 22:38:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 22:39:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 22:39:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 22:39:24 2011] Initial guess for spatial extent in simple fitting = 2.61"
[Mon Oct 24 22:39:24 2011] source mask rpix=5.3, npix_max = 134, mask sum = 121, frac = 0.899
[Mon Oct 24 22:39:24 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.61"
[Mon Oct 24 22:39:25 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 24 22:39:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 22:39:25 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 24 22:39:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 22:39:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 22:39:26 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 24 22:39:26 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 24 22:39:26 2011] Fit fullrun_ccd3_acisf10961_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 24 22:39:59 2011] Spatial fit model total counts = 562.596000, observed total counts = 563.000000
[Mon Oct 24 22:39:59 2011] Offset between fit and detection position for source 2 = 0.084856 pixels
[Mon Oct 24 22:39:59 2011] 562.862700 total counts/ 91.824700 bgd. counts: snr = 49.155960
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.084856 pixels
  Position = (901.4, 1074.7) = 20 32 46.33 41 11 7.4
  Extent = 2.5 (2.3-2.7)", rotation angle = 0
  Source counts = 471.0 +/- 23.7
  Background counts = 91.8
  Rate = 0.02 +/- 0.0008
[Mon Oct 24 22:39:59 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 22:39:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 22:39:59 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 22:39:59 2011] Source does appear to be extended
[Mon Oct 24 22:39:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 22:47:06 2011] Not overwriting source region fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src2_src.reg
[Mon Oct 24 22:47:06 2011] Extracting stamp from image fullrun_ccd3_acisf10961_pi14-548_cl_sm2.00.img.gz, (786, 959) - (1017, 1190)
[Mon Oct 24 22:47:06 2011] Writing fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src2.gif
[Mon Oct 24 22:47:10 2011] ../../acisf10961/products/events/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src2_src.evt and ../../acisf10961/products/events/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Oct 24 22:47:10 2011] Size of ../../acisf10961/products/events/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src2_src.evt.gz[events] = 547 counts
[Mon Oct 24 22:47:10 2011] Mean chipx,y = (83.25, 494.62)
[Mon Oct 24 22:47:10 2011] Mean tdetx,y = (4637.38, 3144.25)
[Mon Oct 24 22:47:10 2011] chipx,y range = (47.00-116.00, 459.00-523.00)
[Mon Oct 24 22:47:10 2011] Size of ../../acisf10961/products/events/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 286 counts
[Mon Oct 24 22:47:10 2011] ../../acisf10961/products/images/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src2_src.img and ../../acisf10961/products/images/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Oct 24 22:47:10 2011] ../../acisf10961/products/spectra/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src2_src.pi and ../../acisf10961/products/spectra/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Oct 24 22:47:13 2011] ../../acisf10961/products/lightcurves/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src2_src.lc and ../../acisf10961/products/lightcurves/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Oct 24 22:51:24 2011] Keeping rmf generated by specextract
[Mon Oct 24 22:51:24 2011] 163.744
[Mon Oct 24 22:52:06 2011] Updating aperture counts using extracted products
[Mon Oct 24 22:52:06 2011] Error reading totcts from fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Oct 24 22:52:07 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 22:52:07 2011] Using photon index=1.80, rate=0.0158, arf fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src2.arf
[Mon Oct 24 22:52:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 22:52:07 2011] Updating source flux to 2.8e-13
[Mon Oct 24 22:52:57 2011] Reading fit data from acisf10961/analysis//spectral/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src2_pl.csv
[Mon Oct 24 22:52:57 2011] Spectral fit parameter nH value = 1.32517e+22
[Mon Oct 24 22:52:57 2011] Spectral fit parameter PhoIndex value = 1.81388
[Mon Oct 24 22:52:57 2011] Failed to get F(0.3-8.0) from acisf10961/analysis//spectral/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Oct 24 22:52:57 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 22:52:57 2011] Using Nh = 1.3e+22, photon index=1.81, rate=0.0158, arf fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src2.arf
[Mon Oct 24 22:52:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 22:52:57 2011] Updating source flux to 2.9e-13