[Mon Oct 24 22:36:17 2011] Detection parameters:
  Position = (140.4, 646.0) = 20 33 19.48 41 7 37.1
  Extent = 0.8" x 0.5", rotation angle = 61 degrees
  Source counts = 29.8 +/- 5.7
  Background counts = 2.2
  Rate = 0.001 +/- 0.0002

[Mon Oct 24 22:36:25 2011] Off-axis axis estimate = 1.15'
[Mon Oct 24 22:38:02 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 22:38:02 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 24 22:38:02 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.923
[Mon Oct 24 22:38:02 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.38"
[Mon Oct 24 22:38:04 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src15.ximg exists
[Mon Oct 24 22:38:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src15.csv
[Mon Oct 24 22:38:04 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src15_1.ximg exists
[Mon Oct 24 22:38:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src15.csv
[Mon Oct 24 22:38:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10961_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 22:38:05 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Mon Oct 24 22:38:05 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Oct 24 22:38:05 2011] Fit fullrun_ccd3_acisf10961_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Oct 24 22:38:37 2011] Spatial fit model total counts = 35.627600, observed total counts = 36.000000
[Mon Oct 24 22:38:37 2011] Offset between fit and detection position for source 14 = 0.957440 pixels
[Mon Oct 24 22:38:37 2011] 35.621260 total counts/ 9.762360 bgd. counts: snr = 8.276232
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.957440 pixels
  Position = (141.0, 646.8) = 20 33 19.48 41 7 37.3
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 25.9 +/- 6.0
  Background counts = 9.8
  Rate = 0.0009 +/- 0.0002
[Mon Oct 24 22:38:37 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 22:38:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 22:38:37 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 22:38:37 2011] Source does appear to be extended
[Mon Oct 24 22:38:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 22:39:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 22:39:24 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Oct 24 22:39:24 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.605
[Mon Oct 24 22:39:24 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.39"
[Mon Oct 24 22:39:25 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src15.ximg exists
[Mon Oct 24 22:39:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src15.csv
[Mon Oct 24 22:39:25 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src15_1.ximg exists
[Mon Oct 24 22:39:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src15.csv
[Mon Oct 24 22:39:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10961_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 22:39:27 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Mon Oct 24 22:39:27 2011] fullrun_ccd3_acisf10961_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Oct 24 22:39:27 2011] Fit fullrun_ccd3_acisf10961_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Oct 24 22:39:59 2011] Spatial fit model total counts = 37.999800, observed total counts = 38.000000
[Mon Oct 24 22:39:59 2011] Offset between fit and detection position for source 14 = 0.007096 pixels
[Mon Oct 24 22:39:59 2011] 37.837800 total counts/ 11.913900 bgd. counts: snr = 7.510578
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.007096 pixels
  Position = (141.0, 646.8) = 20 33 19.48 41 7 37.3
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 25.9 +/- 6.2
  Background counts = 11.9
  Rate = 0.0009 +/- 0.0002
[Mon Oct 24 22:39:59 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 22:39:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 22:39:59 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 22:39:59 2011] Source does appear to be extended
[Mon Oct 24 22:39:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 22:47:06 2011] Not overwriting source region fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src14_src.reg
[Mon Oct 24 22:47:06 2011] Extracting stamp from image fullrun_ccd3_acisf10961_pi14-548_cl_sm2.00.img.gz, (124, 630) - (158, 664)
[Mon Oct 24 22:47:06 2011] Writing fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src14.gif
[Mon Oct 24 22:47:51 2011] ../../acisf10961/products/events/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src14_src.evt and ../../acisf10961/products/events/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Mon Oct 24 22:47:51 2011] Size of ../../acisf10961/products/events/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src14_src.evt.gz[events] = 27 counts
[Mon Oct 24 22:47:51 2011] Mean chipx,y = (813.11, 979.52)
[Mon Oct 24 22:47:51 2011] Mean tdetx,y = (4152.48, 3874.11)
[Mon Oct 24 22:47:51 2011] chipx,y range = (797.00-832.00, 961.00-993.00)
[Mon Oct 24 22:47:51 2011] Size of ../../acisf10961/products/events/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 11 counts
[Mon Oct 24 22:47:51 2011] ../../acisf10961/products/images/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src14_src.img and ../../acisf10961/products/images/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Mon Oct 24 22:47:51 2011] ../../acisf10961/products/spectra/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src14_src.pi and ../../acisf10961/products/spectra/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Mon Oct 24 22:47:51 2011] Not generating rmf since there are only 25 counts
[Mon Oct 24 22:47:53 2011] ../../acisf10961/products/lightcurves/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src14_src.lc and ../../acisf10961/products/lightcurves/fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Mon Oct 24 22:51:25 2011] 199.098
[Mon Oct 24 22:52:06 2011] Updating aperture counts using extracted products
[Mon Oct 24 22:52:06 2011] Error reading totcts from fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src14_src.pi.gz
[Mon Oct 24 22:52:07 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 22:52:07 2011] Using photon index=1.80, rate=0.000871, arf fullrun_ccd3_acisf10961_pi14-548_pass1_cl_src14.arf
[Mon Oct 24 22:52:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 22:52:07 2011] Updating source flux to 1.3e-14
[Mon Oct 24 22:52:46 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting