[Mon Oct 24 22:36:12 2011] Detection parameters:
  Position = (1099.7, 847.4) = 20 33 17.81 41 13 23.7
  Extent = 1.7" x 1.4", rotation angle = 147 degrees
  Source counts = 45.4 +/- 7.5
  Background counts = 10.6
  Rate = 0.002 +/- 0.0003

[Mon Oct 24 22:36:16 2011] Off-axis axis estimate = 6.64'
[Mon Oct 24 22:37:55 2011] Using EEF radius (= 1.97 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 22:37:55 2011] Initial guess for spatial extent in simple fitting = 1.97"
[Mon Oct 24 22:37:55 2011] source mask rpix=4.0, npix_max = 81, mask sum = 81, frac = 1.000
[Mon Oct 24 22:37:55 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 1.97"
[Mon Oct 24 22:37:58 2011] fullrun_ccd2_acisf10961_pi14-548_cl_pass0_src13.ximg exists
[Mon Oct 24 22:37:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10961_pi14-548_cl_pass0_src13.csv
[Mon Oct 24 22:37:58 2011] fullrun_ccd2_acisf10961_pi14-548_cl_pass0_src13_1.ximg exists
[Mon Oct 24 22:37:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10961_pi14-548_cl_pass0_src13.csv
[Mon Oct 24 22:37:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10961_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10961_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 22:38:01 2011] fullrun_ccd2_acisf10961_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Mon Oct 24 22:38:01 2011] fullrun_ccd2_acisf10961_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Oct 24 22:38:01 2011] Fit fullrun_ccd2_acisf10961_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Oct 24 22:38:28 2011] Spatial fit model total counts = 61.998000, observed total counts = 62.000000
[Mon Oct 24 22:38:28 2011] Offset between fit and detection position for source 16 = 1.188993 pixels
[Mon Oct 24 22:38:28 2011] 62.179200 total counts/ 28.640300 bgd. counts: snr = 6.267005
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.188993 pixels
  Position = (1099.2, 848.5) = 20 33 17.85 41 13 24.0
  Extent = 1.4 (0.6-2.0)", rotation angle = 0
  Source counts = 33.5 +/- 7.9
  Background counts = 28.6
  Rate = 0.001 +/- 0.0003
[Mon Oct 24 22:38:28 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 22:38:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 22:38:28 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 22:38:28 2011] Source does appear to be extended
[Mon Oct 24 22:38:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 22:39:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 22:39:17 2011] Initial guess for spatial extent in simple fitting = 1.39"
[Mon Oct 24 22:39:17 2011] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.106
[Mon Oct 24 22:39:17 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 1.39"
[Mon Oct 24 22:39:21 2011] fullrun_ccd2_acisf10961_pi14-548_cl_pass1_src13.ximg exists
[Mon Oct 24 22:39:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10961_pi14-548_cl_pass1_src13.csv
[Mon Oct 24 22:39:21 2011] fullrun_ccd2_acisf10961_pi14-548_cl_pass1_src13_1.ximg exists
[Mon Oct 24 22:39:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10961_pi14-548_cl_pass1_src13.csv
[Mon Oct 24 22:39:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10961_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10961_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 22:39:23 2011] fullrun_ccd2_acisf10961_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Mon Oct 24 22:39:23 2011] fullrun_ccd2_acisf10961_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Oct 24 22:39:23 2011] Fit fullrun_ccd2_acisf10961_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Oct 24 22:39:50 2011] Spatial fit model total counts = 46.999100, observed total counts = 47.000000
[Mon Oct 24 22:39:50 2011] Offset between fit and detection position for source 16 = 0.292239 pixels
[Mon Oct 24 22:39:50 2011] 47.256900 total counts/ 26.393800 bgd. counts: snr = 4.060952
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.292239 pixels
  Position = (1099.0, 848.4) = 20 33 17.86 41 13 23.9
  Extent = 0.8 (0.4-1.7)", rotation angle = 0
  Source counts = 20.9 +/- 6.9
  Background counts = 26.4
  Rate = 0.0007 +/- 0.0002
[Mon Oct 24 22:39:50 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 22:39:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 22:39:50 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 22:39:50 2011] Source does appear to be extended
[Mon Oct 24 22:39:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 22:43:39 2011] Not overwriting source region fullrun_ccd2_acisf10961_pi14-548_pass1_cl_src16_src.reg
[Mon Oct 24 22:43:39 2011] Extracting stamp from image fullrun_ccd2_acisf10961_pi14-548_cl_sm2.00.img.gz, (1062, 811) - (1136, 886)
[Mon Oct 24 22:43:39 2011] Writing fullrun_ccd2_acisf10961_pi14-548_pass1_cl_src16.gif
[Mon Oct 24 22:44:16 2011] ../../acisf10961/products/events/fullrun_ccd2_acisf10961_pi14-548_pass1_cl_src16_src.evt and ../../acisf10961/products/events/fullrun_ccd2_acisf10961_pi14-548_pass1_cl_src16_bgd.evt exist, delete to re-create
[Mon Oct 24 22:44:16 2011] Size of ../../acisf10961/products/events/fullrun_ccd2_acisf10961_pi14-548_pass1_cl_src16_src.evt.gz[events] = 38 counts
[Mon Oct 24 22:44:16 2011] Mean chipx,y = (852.50, 803.18)
[Mon Oct 24 22:44:16 2011] Mean tdetx,y = (3864.18, 3233.50)
[Mon Oct 24 22:44:16 2011] chipx,y range = (835.00-874.00, 779.00-823.00)
[Mon Oct 24 22:44:16 2011] Size of ../../acisf10961/products/events/fullrun_ccd2_acisf10961_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 32 counts
[Mon Oct 24 22:44:16 2011] ../../acisf10961/products/images/fullrun_ccd2_acisf10961_pi14-548_pass1_cl_src16_src.img and ../../acisf10961/products/images/fullrun_ccd2_acisf10961_pi14-548_pass1_cl_src16_bgd.img exist, delete to re-create
[Mon Oct 24 22:44:16 2011] ../../acisf10961/products/spectra/fullrun_ccd2_acisf10961_pi14-548_pass1_cl_src16_src.pi and ../../acisf10961/products/spectra/fullrun_ccd2_acisf10961_pi14-548_pass1_cl_src16_bgd.pi exist, delete to re-create
[Mon Oct 24 22:44:16 2011] Not generating rmf since there are only 20 counts
[Mon Oct 24 22:44:20 2011] ../../acisf10961/products/lightcurves/fullrun_ccd2_acisf10961_pi14-548_pass1_cl_src16_src.lc and ../../acisf10961/products/lightcurves/fullrun_ccd2_acisf10961_pi14-548_pass1_cl_src16_bgd.lc exist, delete to re-create
[Mon Oct 24 22:47:04 2011] 169.975
[Mon Oct 24 22:52:04 2011] Updating aperture counts using extracted products
[Mon Oct 24 22:52:04 2011] Error reading totcts from fullrun_ccd2_acisf10961_pi14-548_pass1_cl_src16_src.pi.gz
[Mon Oct 24 22:52:05 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 22:52:05 2011] Using photon index=1.80, rate=0.000701, arf fullrun_ccd2_acisf10961_pi14-548_pass1_cl_src16.arf
[Mon Oct 24 22:52:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 22:52:05 2011] Updating source flux to 1.2e-14
[Mon Oct 24 22:52:25 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting