[Mon Oct 24 22:36:08 2011] Detection parameters:
  Position = (736.3, 1018.8) = 20 33 14.40 41 3 10.3
  Extent = 0.6" x 0.5", rotation angle = 105 degrees
  Source counts = 28.9 +/- 5.6
  Background counts = 2.1
  Rate = 0.001 +/- 0.0002

[Mon Oct 24 22:36:10 2011] Off-axis axis estimate = 4.12'
[Mon Oct 24 22:37:53 2011] Using EEF radius (= 0.87 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 22:37:53 2011] Initial guess for spatial extent in simple fitting = 0.87"
[Mon Oct 24 22:37:53 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.979
[Mon Oct 24 22:37:53 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.87"
[Mon Oct 24 22:37:54 2011] fullrun_ccd1_acisf10961_pi14-548_cl_pass0_src9.ximg exists
[Mon Oct 24 22:37:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10961_pi14-548_cl_pass0_src9.csv
[Mon Oct 24 22:37:54 2011] fullrun_ccd1_acisf10961_pi14-548_cl_pass0_src9_1.ximg exists
[Mon Oct 24 22:37:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10961_pi14-548_cl_pass0_src9.csv
[Mon Oct 24 22:37:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10961_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10961_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 22:37:55 2011] fullrun_ccd1_acisf10961_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Mon Oct 24 22:37:55 2011] fullrun_ccd1_acisf10961_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Oct 24 22:37:55 2011] Fit fullrun_ccd1_acisf10961_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Oct 24 22:38:21 2011] Spatial fit model total counts = 34.645400, observed total counts = 34.000000
[Mon Oct 24 22:38:21 2011] Offset between fit and detection position for source 7 = 0.834434 pixels
[Mon Oct 24 22:38:21 2011] 35.139950 total counts/ 6.924550 bgd. counts: snr = 10.722361
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.834434 pixels
  Position = (736.9, 1019.3) = 20 33 14.40 41 3 10.3
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 28.2 +/- 5.9
  Background counts = 6.9
  Rate = 0.0009 +/- 0.0002
[Mon Oct 24 22:38:21 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 22:38:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 22:38:21 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 22:38:21 2011] Source does appear to be extended
[Mon Oct 24 22:38:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 22:39:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 22:39:16 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Mon Oct 24 22:39:16 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.131
[Mon Oct 24 22:39:16 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.68"
[Mon Oct 24 22:39:16 2011] fullrun_ccd1_acisf10961_pi14-548_cl_pass1_src9.ximg exists
[Mon Oct 24 22:39:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10961_pi14-548_cl_pass1_src9.csv
[Mon Oct 24 22:39:16 2011] fullrun_ccd1_acisf10961_pi14-548_cl_pass1_src9_1.ximg exists
[Mon Oct 24 22:39:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10961_pi14-548_cl_pass1_src9.csv
[Mon Oct 24 22:39:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10961_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10961_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 22:39:17 2011] fullrun_ccd1_acisf10961_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Mon Oct 24 22:39:17 2011] fullrun_ccd1_acisf10961_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Oct 24 22:39:17 2011] Fit fullrun_ccd1_acisf10961_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Oct 24 22:39:43 2011] Spatial fit model total counts = 34.623200, observed total counts = 34.000000
[Mon Oct 24 22:39:43 2011] Offset between fit and detection position for source 7 = 0.012714 pixels
[Mon Oct 24 22:39:43 2011] 34.881070 total counts/ 6.466470 bgd. counts: snr = 11.173981
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.012714 pixels
  Position = (736.9, 1019.3) = 20 33 14.40 41 3 10.3
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 28.4 +/- 5.9
  Background counts = 6.5
  Rate = 0.001 +/- 0.0002
[Mon Oct 24 22:39:43 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 22:39:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 22:39:43 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 22:39:43 2011] Source does appear to be extended
[Mon Oct 24 22:39:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 22:42:16 2011] Not overwriting source region fullrun_ccd1_acisf10961_pi14-548_pass1_cl_src7_src.reg
[Mon Oct 24 22:42:16 2011] Extracting stamp from image fullrun_ccd1_acisf10961_pi14-548_cl_sm2.00.img.gz, (706, 988) - (768, 1051)
[Mon Oct 24 22:42:16 2011] Writing fullrun_ccd1_acisf10961_pi14-548_pass1_cl_src7.gif
[Mon Oct 24 22:42:43 2011] ../../acisf10961/products/events/fullrun_ccd1_acisf10961_pi14-548_pass1_cl_src7_src.evt and ../../acisf10961/products/events/fullrun_ccd1_acisf10961_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Mon Oct 24 22:42:43 2011] Size of ../../acisf10961/products/events/fullrun_ccd1_acisf10961_pi14-548_pass1_cl_src7_src.evt.gz[events] = 31 counts
[Mon Oct 24 22:42:43 2011] Mean chipx,y = (199.48, 622.10)
[Mon Oct 24 22:42:43 2011] Mean tdetx,y = (4509.90, 4306.48)
[Mon Oct 24 22:42:43 2011] chipx,y range = (180.00-216.00, 605.00-640.00)
[Mon Oct 24 22:42:43 2011] Size of ../../acisf10961/products/events/fullrun_ccd1_acisf10961_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 32 counts
[Mon Oct 24 22:42:43 2011] ../../acisf10961/products/images/fullrun_ccd1_acisf10961_pi14-548_pass1_cl_src7_src.img and ../../acisf10961/products/images/fullrun_ccd1_acisf10961_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Mon Oct 24 22:42:43 2011] ../../acisf10961/products/spectra/fullrun_ccd1_acisf10961_pi14-548_pass1_cl_src7_src.pi and ../../acisf10961/products/spectra/fullrun_ccd1_acisf10961_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Mon Oct 24 22:42:43 2011] Not generating rmf since there are only 28 counts
[Mon Oct 24 22:42:46 2011] ../../acisf10961/products/lightcurves/fullrun_ccd1_acisf10961_pi14-548_pass1_cl_src7_src.lc and ../../acisf10961/products/lightcurves/fullrun_ccd1_acisf10961_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Mon Oct 24 22:43:38 2011] 192.244
[Mon Oct 24 22:52:04 2011] Updating aperture counts using extracted products
[Mon Oct 24 22:52:04 2011] Error reading totcts from fullrun_ccd1_acisf10961_pi14-548_pass1_cl_src7_src.pi.gz
[Mon Oct 24 22:52:04 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 22:52:04 2011] Using photon index=1.80, rate=0.000954, arf fullrun_ccd1_acisf10961_pi14-548_pass1_cl_src7.arf
[Mon Oct 24 22:52:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 22:52:04 2011] Updating source flux to 1.5e-14
[Mon Oct 24 22:52:24 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 24 22:52:25 2011] acisf10961/analysis//spectral/fullrun_ccd1_acisf10961_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete