[Mon Oct 24 22:36:06 2011] Detection parameters:
  Position = (1083.5, 938.6) = 20 33 39.46 41 6 33.9
  Extent = 0.5" x 0.5", rotation angle = 49 degrees
  Source counts = 12.9 +/- 3.7
  Background counts = 1.1
  Rate = 0.0004 +/- 0.0001

[Mon Oct 24 22:36:08 2011] Off-axis axis estimate = 2.91'
[Mon Oct 24 22:37:51 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 22:37:51 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Mon Oct 24 22:37:51 2011] source mask rpix=1.1, npix_max = 10, mask sum = 6, frac = 0.555
[Mon Oct 24 22:37:51 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.56"
[Mon Oct 24 22:37:52 2011] fullrun_ccd0_acisf10961_pi14-548_cl_pass0_src9.ximg exists
[Mon Oct 24 22:37:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10961_pi14-548_cl_pass0_src9.csv
[Mon Oct 24 22:37:52 2011] fullrun_ccd0_acisf10961_pi14-548_cl_pass0_src9_1.ximg exists
[Mon Oct 24 22:37:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10961_pi14-548_cl_pass0_src9.csv
[Mon Oct 24 22:37:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10961_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10961_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 22:37:53 2011] fullrun_ccd0_acisf10961_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Mon Oct 24 22:37:53 2011] fullrun_ccd0_acisf10961_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Oct 24 22:37:53 2011] Fit fullrun_ccd0_acisf10961_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Oct 24 22:38:18 2011] Spatial fit model total counts = 22.971400, observed total counts = 21.000000
[Mon Oct 24 22:38:18 2011] Offset between fit and detection position for source 12 = 0.705430 pixels
[Mon Oct 24 22:38:18 2011] 23.171740 total counts/ 1.837140 bgd. counts: snr = 15.740314
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.705430 pixels
  Position = (1083.8, 938.0) = 20 33 39.47 41 6 33.3
  Extent = 0.8 (0.4-1.1)", rotation angle = 0
  Source counts = 21.3 +/- 4.8
  Background counts = 1.8
  Rate = 0.0007 +/- 0.0002
[Mon Oct 24 22:38:18 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 22:38:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 22:38:18 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 22:38:18 2011] Source does appear to be extended
[Mon Oct 24 22:38:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 22:39:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 22:39:13 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Mon Oct 24 22:39:13 2011] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.631
[Mon Oct 24 22:39:13 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.83"
[Mon Oct 24 22:39:15 2011] fullrun_ccd0_acisf10961_pi14-548_cl_pass1_src9.ximg exists
[Mon Oct 24 22:39:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10961_pi14-548_cl_pass1_src9.csv
[Mon Oct 24 22:39:15 2011] fullrun_ccd0_acisf10961_pi14-548_cl_pass1_src9_1.ximg exists
[Mon Oct 24 22:39:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10961_pi14-548_cl_pass1_src9.csv
[Mon Oct 24 22:39:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10961_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10961_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 22:39:15 2011] fullrun_ccd0_acisf10961_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Mon Oct 24 22:39:15 2011] fullrun_ccd0_acisf10961_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Oct 24 22:39:15 2011] Fit fullrun_ccd0_acisf10961_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Oct 24 22:39:39 2011] Spatial fit model total counts = 21.656700, observed total counts = 21.000000
[Mon Oct 24 22:39:39 2011] Offset between fit and detection position for source 12 = 0.182809 pixels
[Mon Oct 24 22:39:39 2011] 21.739540 total counts/ 1.462440 bgd. counts: snr = 16.767442
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.182809 pixels
  Position = (1084.0, 938.0) = 20 33 39.46 41 6 33.3
  Extent = 0.8 (0.5-1.0)", rotation angle = 0
  Source counts = 20.3 +/- 4.7
  Background counts = 1.5
  Rate = 0.0007 +/- 0.0002
[Mon Oct 24 22:39:39 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 22:39:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 22:39:39 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 22:39:39 2011] Source does appear to be extended
[Mon Oct 24 22:39:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 22:40:32 2011] Not overwriting source region fullrun_ccd0_acisf10961_pi14-548_pass1_cl_src12_src.reg
[Mon Oct 24 22:40:32 2011] Extracting stamp from image fullrun_ccd0_acisf10961_pi14-548_cl_sm2.00.img.gz, (1047, 901) - (1121, 975)
[Mon Oct 24 22:40:32 2011] Writing fullrun_ccd0_acisf10961_pi14-548_pass1_cl_src12.gif
[Mon Oct 24 22:41:02 2011] ../../acisf10961/products/events/fullrun_ccd0_acisf10961_pi14-548_pass1_cl_src12_src.evt and ../../acisf10961/products/events/fullrun_ccd0_acisf10961_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Mon Oct 24 22:41:02 2011] Size of ../../acisf10961/products/events/fullrun_ccd0_acisf10961_pi14-548_pass1_cl_src12_src.evt.gz[events] = 20 counts
[Mon Oct 24 22:41:02 2011] Mean chipx,y = (924.90, 746.25)
[Mon Oct 24 22:41:02 2011] Mean tdetx,y = (3807.25, 4207.10)
[Mon Oct 24 22:41:02 2011] chipx,y range = (908.00-944.00, 730.00-765.00)
[Mon Oct 24 22:41:02 2011] Size of ../../acisf10961/products/events/fullrun_ccd0_acisf10961_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 22 counts
[Mon Oct 24 22:41:02 2011] ../../acisf10961/products/images/fullrun_ccd0_acisf10961_pi14-548_pass1_cl_src12_src.img and ../../acisf10961/products/images/fullrun_ccd0_acisf10961_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Mon Oct 24 22:41:02 2011] ../../acisf10961/products/spectra/fullrun_ccd0_acisf10961_pi14-548_pass1_cl_src12_src.pi and ../../acisf10961/products/spectra/fullrun_ccd0_acisf10961_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Mon Oct 24 22:41:02 2011] Not generating rmf since there are only 20 counts
[Mon Oct 24 22:41:05 2011] ../../acisf10961/products/lightcurves/fullrun_ccd0_acisf10961_pi14-548_pass1_cl_src12_src.lc and ../../acisf10961/products/lightcurves/fullrun_ccd0_acisf10961_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Mon Oct 24 22:42:15 2011] 188.178
[Mon Oct 24 22:52:03 2011] Updating aperture counts using extracted products
[Mon Oct 24 22:52:03 2011] Error reading totcts from fullrun_ccd0_acisf10961_pi14-548_pass1_cl_src12_src.pi.gz
[Mon Oct 24 22:52:03 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 22:52:03 2011] Using photon index=1.80, rate=0.000681, arf fullrun_ccd0_acisf10961_pi14-548_pass1_cl_src12.arf
[Mon Oct 24 22:52:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 22:52:03 2011] Updating source flux to 1.1e-14
[Mon Oct 24 22:52:18 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting