[Sat Feb 25 13:48:35 2012] Detection parameters:
  Position = (470.8, 281.2) = 20 33 41.25 41 26 12.1
  Extent = 0.8" x 0.6", rotation angle = 84 degrees
  Source counts = 36.7 +/- 6.2
  Background counts = 2.3
  Rate = 0.001 +/- 0.0002

[Sat Feb 25 13:48:40 2012] Off-axis axis estimate = 4.30'
[Sat Feb 25 15:29:18 2012] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 15:29:18 2012] Initial guess for spatial extent in simple fitting = 0.92"
[Sat Feb 25 15:29:18 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.106
[Sat Feb 25 15:29:18 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 0.92"
[Sat Feb 25 16:21:50 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src11.ximg exists
[Sat Feb 25 16:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src11.csv
[Sat Feb 25 16:21:50 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src11_1.ximg exists
[Sat Feb 25 16:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src11.csv
[Sat Feb 25 16:21:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 16:21:51 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sat Feb 25 16:21:51 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Feb 25 16:21:51 2012] Fit fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Feb 25 16:22:11 2012] Spatial fit model total counts = 39.649000, observed total counts = 41.000000
[Sat Feb 25 16:22:11 2012] Offset between fit and detection position for source 7 = 0.911083 pixels
[Sat Feb 25 16:22:11 2012] 38.720262 total counts/ 0.014962 bgd. counts: snr = 316.428515
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.911083 pixels
  Position = (471.4, 281.9) = 20 33 41.24 41 26 12.2
  Extent = 1.0 (0.8-1.1)", rotation angle = 0
  Source counts = 38.7 +/- 6.2
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sat Feb 25 16:22:11 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 16:22:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 16:22:11 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 16:22:11 2012] Source does appear to be extended
[Sat Feb 25 16:22:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 17:55:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 17:55:54 2012] Initial guess for spatial extent in simple fitting = 0.95"
[Sat Feb 25 17:55:54 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.052
[Sat Feb 25 17:55:54 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 0.95"
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src11.ximg exists
[Sat Feb 25 18:44:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src11.csv
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src11_1.ximg exists
[Sat Feb 25 18:44:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src11.csv
[Sat Feb 25 18:44:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Feb 25 18:44:24 2012] Fit fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Feb 25 18:44:44 2012] Spatial fit model total counts = 40.476900, observed total counts = 41.000000
[Sat Feb 25 18:44:44 2012] Offset between fit and detection position for source 7 = 0.015723 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.015723 pixels
  Position = (471.4, 281.9) = 20 33 41.24 41 26 12.2
  Extent = 0.9 (0.8-1.2)", rotation angle = 0
  Source counts = 39.5 +/- 6.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sat Feb 25 18:44:44 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 18:44:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 18:44:44 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 18:44:44 2012] Source does appear to be extended
[Sat Feb 25 18:44:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 19:42:31 2012] Writing source region out to fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src7_src.reg
[Sat Feb 25 19:42:31 2012] Extracting stamp from image fullrun_ccd3_acisf10959_pi14-548_cl_sm2.00.img.gz, (428, 239) - (515, 325)
[Sat Feb 25 19:42:31 2012] Writing fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src7.gif
[Sat Feb 25 19:47:52 2012] Size of ../../acisf10959/products/events/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src7_src.evt.gz[events] = 39 counts
[Sat Feb 25 19:47:52 2012] Mean chipx,y = (976.74, 501.67)
[Sat Feb 25 19:47:52 2012] Mean tdetx,y = (4630.33, 4037.74)
[Sat Feb 25 19:47:52 2012] chipx,y range = (958.00-995.00, 487.00-520.00)
[Sat Feb 25 19:47:52 2012] Size of ../../acisf10959/products/events/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 34 counts
[Sat Feb 25 19:47:53 2012] Not generating rmf since there are only 39 counts
[Sat Feb 25 19:47:53 2012] arf not found, will run specextract
[Sat Feb 25 19:48:20 2012] ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src7.warf not found
[Sat Feb 25 19:48:20 2012] ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src7.wrmf not found
[Sat Feb 25 19:48:20 2012] Removal of ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src7.soff failed
[Sat Feb 25 20:15:03 2012] Spectrum 7 has only 39 counts, deleting rmf
[Sat Feb 25 20:15:03 2012] 193.491
[Sat Feb 25 20:15:30 2012] Updating aperture counts using extracted products
[Sat Feb 25 20:15:30 2012] Error reading totcts from fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src7_src.pi.gz
[Sat Feb 25 20:15:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 20:15:31 2012] Using photon index=1.80, rate=0.0014, arf fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src7.arf
[Sat Feb 25 20:15:31 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 20:15:31 2012] Updating source flux to 2.2e-14
[Sat Feb 25 20:16:02 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 20:16:03 2012] acisf10959/analysis//spectral/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete