[Sat Feb 25 13:48:38 2012] Detection parameters:
  Position = (423.5, 1012.4) = 20 33 43.29 41 32 11.9
  Extent = 1.1" x 0.5", rotation angle = 130 degrees
  Source counts = 20.0 +/- 4.7
  Background counts = 2.0
  Rate = 0.0007 +/- 0.0002

[Sat Feb 25 13:48:40 2012] Off-axis axis estimate = 5.03'
[Sat Feb 25 15:29:18 2012] Using EEF radius (= 1.19 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 15:29:18 2012] Initial guess for spatial extent in simple fitting = 1.19"
[Sat Feb 25 15:29:18 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.879
[Sat Feb 25 15:29:18 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 1.19"
[Sat Feb 25 16:21:50 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src19.ximg exists
[Sat Feb 25 16:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src19.csv
[Sat Feb 25 16:21:50 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src19_1.ximg exists
[Sat Feb 25 16:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src19.csv
[Sat Feb 25 16:21:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 16:21:51 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Sat Feb 25 16:21:51 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Feb 25 16:21:51 2012] Fit fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Feb 25 16:22:11 2012] Spatial fit model total counts = 27.999600, observed total counts = 28.000000
[Sat Feb 25 16:22:11 2012] Offset between fit and detection position for source 51 = 0.940292 pixels
[Sat Feb 25 16:22:11 2012] 27.563200 total counts/ 11.135700 bgd. counts: snr = 4.922806
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 0.940292 pixels
  Position = (424.0, 1013.2) = 20 33 43.29 41 32 12.0
  Extent = 0.8 (0.5-1.2)", rotation angle = 0
  Source counts = 16.4 +/- 5.3
  Background counts = 11.1
  Rate = 0.0006 +/- 0.0002
[Sat Feb 25 16:22:11 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 16:22:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 16:22:11 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 16:22:11 2012] Source does appear to be extended
[Sat Feb 25 16:22:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 17:55:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 17:55:54 2012] Initial guess for spatial extent in simple fitting = 0.85"
[Sat Feb 25 17:55:54 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.806
[Sat Feb 25 17:55:54 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 0.85"
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src19.ximg exists
[Sat Feb 25 18:44:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src19.csv
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src19_1.ximg exists
[Sat Feb 25 18:44:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src19.csv
[Sat Feb 25 18:44:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Feb 25 18:44:24 2012] Fit fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Feb 25 18:44:44 2012] Spatial fit model total counts = 28.998900, observed total counts = 29.000000
[Sat Feb 25 18:44:44 2012] Offset between fit and detection position for source 51 = 0.066220 pixels
[Sat Feb 25 18:44:44 2012] 28.193300 total counts/ 12.863000 bgd. counts: snr = 4.274443
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 0.066220 pixels
  Position = (424.0, 1013.3) = 20 33 43.29 41 32 12.0
  Extent = 0.8 (0.5-1.3)", rotation angle = 0
  Source counts = 15.3 +/- 5.3
  Background counts = 12.9
  Rate = 0.0005 +/- 0.0002
[Sat Feb 25 18:44:44 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 18:44:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 18:44:44 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 18:44:44 2012] Source does appear to be extended
[Sat Feb 25 18:44:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 19:42:31 2012] Writing source region out to fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src51_src.reg
[Sat Feb 25 19:42:31 2012] Extracting stamp from image fullrun_ccd3_acisf10959_pi14-548_cl_sm2.00.img.gz, (388, 977) - (460, 1050)
[Sat Feb 25 19:42:31 2012] Writing fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src51.gif
[Sat Feb 25 19:51:53 2012] Size of ../../acisf10959/products/events/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src51_src.evt.gz[events] = 23 counts
[Sat Feb 25 19:51:53 2012] Mean chipx,y = (350.61, 880.43)
[Sat Feb 25 19:51:53 2012] Mean tdetx,y = (4251.57, 3411.61)
[Sat Feb 25 19:51:53 2012] chipx,y range = (329.00-367.00, 863.00-902.00)
[Sat Feb 25 19:51:53 2012] Size of ../../acisf10959/products/events/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src51_bgd.evt.gz[events] = 23 counts
[Sat Feb 25 19:51:54 2012] Not generating rmf since there are only 15 counts
[Sat Feb 25 19:51:54 2012] arf not found, will run specextract
[Sat Feb 25 19:52:22 2012] ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src51.warf not found
[Sat Feb 25 19:52:22 2012] ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src51.wrmf not found
[Sat Feb 25 19:52:22 2012] Removal of ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src51.soff failed
[Sat Feb 25 20:15:04 2012] Spectrum 51 has only 15 counts, deleting rmf
[Sat Feb 25 20:15:04 2012] 179.705
[Sat Feb 25 20:15:30 2012] Updating aperture counts using extracted products
[Sat Feb 25 20:15:30 2012] Error reading totcts from fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src51_src.pi.gz
[Sat Feb 25 20:15:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 20:15:31 2012] Using photon index=1.80, rate=0.000544, arf fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src51.arf
[Sat Feb 25 20:15:31 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 20:15:31 2012] Updating source flux to 9e-15
[Sat Feb 25 20:16:02 2012] Source 51 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 20:16:03 2012] acisf10959/analysis//spectral/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src51_pl.csv not found, spectral fit skipped or did not complete