[Sat Feb 25 13:48:35 2012] Detection parameters:
  Position = (923.4, 861.4) = 20 33 21.40 41 30 57.2
  Extent = 1.7" x 1.0", rotation angle = 147 degrees
  Source counts = 52.8 +/- 7.6
  Background counts = 5.2
  Rate = 0.002 +/- 0.0003

[Sat Feb 25 13:48:40 2012] Off-axis axis estimate = 7.83'
[Sat Feb 25 15:29:18 2012] Using EEF radius (= 2.71 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 15:29:18 2012] Initial guess for spatial extent in simple fitting = 2.71"
[Sat Feb 25 15:29:18 2012] source mask rpix=5.5, npix_max = 144, mask sum = 120, frac = 0.831
[Sat Feb 25 15:29:18 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 2.71"
[Sat Feb 25 16:21:50 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src5.ximg exists
[Sat Feb 25 16:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src5.csv
[Sat Feb 25 16:21:50 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src5_1.ximg exists
[Sat Feb 25 16:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src5.csv
[Sat Feb 25 16:21:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 16:21:50 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sat Feb 25 16:21:50 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Feb 25 16:21:50 2012] Fit fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Feb 25 16:22:11 2012] Spatial fit model total counts = 85.995000, observed total counts = 86.000000
[Sat Feb 25 16:22:11 2012] Offset between fit and detection position for source 5 = 1.357368 pixels
[Sat Feb 25 16:22:11 2012] 85.523300 total counts/ 28.408400 bgd. counts: snr = 10.715835
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.357368 pixels
  Position = (924.4, 860.6) = 20 33 21.37 41 30 56.6
  Extent = 1.8 (1.5-2.3)", rotation angle = 0
  Source counts = 57.1 +/- 9.2
  Background counts = 28.4
  Rate = 0.002 +/- 0.0003
[Sat Feb 25 16:22:11 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 16:22:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 16:22:11 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 16:22:11 2012] Source does appear to be extended
[Sat Feb 25 16:22:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 17:55:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 17:55:54 2012] Initial guess for spatial extent in simple fitting = 1.84"
[Sat Feb 25 17:55:54 2012] source mask rpix=3.7, npix_max = 72, mask sum = 70, frac = 0.971
[Sat Feb 25 17:55:54 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 1.84"
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src5.ximg exists
[Sat Feb 25 18:44:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src5.csv
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src5_1.ximg exists
[Sat Feb 25 18:44:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src5.csv
[Sat Feb 25 18:44:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Feb 25 18:44:24 2012] Fit fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Feb 25 18:44:44 2012] Spatial fit model total counts = 71.763200, observed total counts = 72.000000
[Sat Feb 25 18:44:44 2012] Offset between fit and detection position for source 5 = 0.323816 pixels
[Sat Feb 25 18:44:44 2012] 70.607200 total counts/ 17.674300 bgd. counts: snr = 12.590836
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.323816 pixels
  Position = (924.8, 860.6) = 20 33 21.36 41 30 56.6
  Extent = 1.8 (1.3-2.5)", rotation angle = 0
  Source counts = 52.9 +/- 8.4
  Background counts = 17.7
  Rate = 0.002 +/- 0.0003
[Sat Feb 25 18:44:44 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 18:44:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 18:44:44 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 18:44:44 2012] Source does appear to be extended
[Sat Feb 25 18:44:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 19:42:31 2012] Writing source region out to fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src5_src.reg
[Sat Feb 25 19:42:31 2012] Extracting stamp from image fullrun_ccd3_acisf10959_pi14-548_cl_sm2.00.img.gz, (844, 780) - (1005, 941)
[Sat Feb 25 19:42:31 2012] Writing fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src5.gif
[Sat Feb 25 19:44:35 2012] Size of ../../acisf10959/products/events/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src5_src.evt.gz[events] = 74 counts
[Sat Feb 25 19:44:35 2012] Mean chipx,y = (255.18, 365.73)
[Sat Feb 25 19:44:35 2012] Mean tdetx,y = (4766.27, 3316.18)
[Sat Feb 25 19:44:35 2012] chipx,y range = (231.00-277.00, 338.00-386.00)
[Sat Feb 25 19:44:35 2012] Size of ../../acisf10959/products/events/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 84 counts
[Sat Feb 25 19:44:36 2012] Not generating rmf since there are only 52 counts
[Sat Feb 25 19:44:36 2012] arf not found, will run specextract
[Sat Feb 25 19:44:58 2012] ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src5.warf not found
[Sat Feb 25 19:44:58 2012] ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src5.wrmf not found
[Sat Feb 25 19:44:58 2012] Removal of ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src5.soff failed
[Sat Feb 25 20:15:03 2012] Spectrum 5 has only 53 counts, deleting rmf
[Sat Feb 25 20:15:03 2012] 162.195
[Sat Feb 25 20:15:30 2012] Updating aperture counts using extracted products
[Sat Feb 25 20:15:30 2012] Error reading totcts from fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src5_src.pi.gz
[Sat Feb 25 20:15:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 20:15:31 2012] Using photon index=1.80, rate=0.00188, arf fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src5.arf
[Sat Feb 25 20:15:31 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 20:15:31 2012] Updating source flux to 3.4e-14
[Sat Feb 25 20:16:02 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 20:16:03 2012] acisf10959/analysis//spectral/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete