[Sat Feb 25 13:48:36 2012] Detection parameters:
  Position = (514.3, 267.1) = 20 33 39.34 41 26 5.1
  Extent = 1.1" x 0.5", rotation angle = 109 degrees
  Source counts = 11.4 +/- 3.6
  Background counts = 1.6
  Rate = 0.0004 +/- 0.0001

[Sat Feb 25 13:48:40 2012] Off-axis axis estimate = 4.66'
[Sat Feb 25 15:29:18 2012] Using EEF radius (= 1.05 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 15:29:18 2012] Initial guess for spatial extent in simple fitting = 1.05"
[Sat Feb 25 15:29:18 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.079
[Sat Feb 25 15:29:18 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 1.05"
[Sat Feb 25 16:21:50 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src37.ximg exists
[Sat Feb 25 16:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src37.csv
[Sat Feb 25 16:21:50 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src37_1.ximg exists
[Sat Feb 25 16:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src37.csv
[Sat Feb 25 16:21:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 16:21:51 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Sat Feb 25 16:21:51 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Sat Feb 25 16:21:51 2012] Fit fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src37 appears to have run properly
[Sat Feb 25 16:22:11 2012] Source 30 is offset by 8.582086 and 4.105052 pixels which is larger than
2 X fitted extent = 1.073764 x 1.073764, not incorporating fit results
[Sat Feb 25 16:22:11 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 16:22:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 16:22:11 2012] Assessing source extent using major
[Sat Feb 25 16:22:11 2012] Source does appear to be extended
[Sat Feb 25 16:22:11 2012] Computing asymmetry using major and minor axis, asym = 2.23
[Sat Feb 25 16:22:11 2012] Source is asymmetric
[Sat Feb 25 17:55:54 2012] Using EEF radius (= 1.05 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 17:55:54 2012] Initial guess for spatial extent in simple fitting = 1.05"
[Sat Feb 25 17:55:54 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.079
[Sat Feb 25 17:55:54 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 1.05"
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src37.ximg exists
[Sat Feb 25 18:44:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src37.csv
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src37_1.ximg exists
[Sat Feb 25 18:44:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src37.csv
[Sat Feb 25 18:44:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src37.ximg exists
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src37_1.ximg exists
[Sat Feb 25 18:44:24 2012] Fit fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src37 appears to have run properly
[Sat Feb 25 18:44:44 2012] Spatial fit model total counts = 15.546300, observed total counts = 17.000000
[Sat Feb 25 18:44:44 2012] Offset between fit and detection position for source 30 = 1.071032 pixels
[Sat Feb 25 18:44:44 2012] 15.743790 total counts/ 3.948790 bgd. counts: snr = 5.935618
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.071032 pixels
  Position = (515.4, 266.8) = 20 33 39.32 41 26 4.8
  Extent = 1.5" x 0.5", rotation angle = 99
  Source counts = 11.8 +/- 4.0
  Background counts = 3.9
  Rate = 0.0004 +/- 0.0001
[Sat Feb 25 18:44:44 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 18:44:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 18:44:44 2012] Assessing source extent using major
[Sat Feb 25 18:44:44 2012] Source does appear to be extended
[Sat Feb 25 18:44:44 2012] Computing asymmetry using major and minor axis, asym = 3.02
[Sat Feb 25 18:44:44 2012] Source is asymmetric
[Sat Feb 25 19:42:32 2012] Writing source region out to fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src30_src.reg
[Sat Feb 25 19:42:32 2012] Extracting stamp from image fullrun_ccd3_acisf10959_pi14-548_cl_sm2.00.img.gz, (448, 200) - (582, 334)
[Sat Feb 25 19:42:32 2012] Writing fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src30.gif
[Sat Feb 25 20:01:45 2012] Size of ../../acisf10959/products/events/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src30_src.evt.gz[events] = 13 counts
[Sat Feb 25 20:01:45 2012] Mean chipx,y = (969.08, 458.00)
[Sat Feb 25 20:01:45 2012] Mean tdetx,y = (4674.00, 4030.08)
[Sat Feb 25 20:01:45 2012] chipx,y range = (952.00-989.00, 439.00-472.00)
[Sat Feb 25 20:01:45 2012] Size of ../../acisf10959/products/events/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 75 counts
[Sat Feb 25 20:01:46 2012] Not generating rmf since there are only 11 counts
[Sat Feb 25 20:01:46 2012] arf not found, will run specextract
[Sat Feb 25 20:02:10 2012] ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src30.warf not found
[Sat Feb 25 20:02:10 2012] ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src30.wrmf not found
[Sat Feb 25 20:02:10 2012] Removal of ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src30.soff failed
[Sat Feb 25 20:15:04 2012] Spectrum 30 has only 12 counts, deleting rmf
[Sat Feb 25 20:15:04 2012] 191.727
[Sat Feb 25 20:15:30 2012] Updating aperture counts using extracted products
[Sat Feb 25 20:15:30 2012] Error reading totcts from fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src30_src.pi.gz
[Sat Feb 25 20:15:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 20:15:31 2012] Using photon index=1.80, rate=0.000419, arf fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src30.arf
[Sat Feb 25 20:15:31 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 20:15:31 2012] Updating source flux to 6.5e-15
[Sat Feb 25 20:16:02 2012] Flag b found in src. 30 procflags, skipping spectral fitting
[Sat Feb 25 20:16:02 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 20:16:03 2012] acisf10959/analysis//spectral/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete