[Sat Feb 25 13:48:35 2012] Detection parameters:
  Position = (137.0, 558.5) = 20 33 55.85 41 28 28.6
  Extent = 0.5" x 0.5", rotation angle = 176 degrees
  Source counts = 26.3 +/- 5.2
  Background counts = 0.7
  Rate = 0.0009 +/- 0.0002

[Sat Feb 25 13:48:40 2012] Off-axis axis estimate = 0.95'
[Sat Feb 25 15:29:18 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 15:29:18 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Feb 25 15:29:18 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.926
[Sat Feb 25 15:29:18 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 0.38"
[Sat Feb 25 16:21:50 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src14.ximg exists
[Sat Feb 25 16:21:50 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src14_1.ximg exists
[Sat Feb 25 16:21:50 2012] Fit fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src14 appears to have run properly
[Sat Feb 25 16:21:51 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Sat Feb 25 16:21:51 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Feb 25 16:21:51 2012] Fit fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Sat Feb 25 16:22:11 2012] Spatial fit model total counts = 27.177100, observed total counts = 30.000000
[Sat Feb 25 16:22:11 2012] Offset between fit and detection position for source 14 = 0.842032 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.842032 pixels
  Position = (137.7, 559.0) = 20 33 55.84 41 28 28.6
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 26.1 +/- 5.1
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Sat Feb 25 16:22:11 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 16:22:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 16:22:11 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 16:22:11 2012] Source does appear to be extended
[Sat Feb 25 16:22:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 17:55:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 17:55:54 2012] Initial guess for spatial extent in simple fitting = 0.36"
[Sat Feb 25 17:55:54 2012] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.003
[Sat Feb 25 17:55:54 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 0.36"
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src14.ximg exists
[Sat Feb 25 18:44:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src14.csv
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src14_1.ximg exists
[Sat Feb 25 18:44:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src14.csv
[Sat Feb 25 18:44:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Sat Feb 25 18:44:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src14.csv
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Sat Feb 25 18:44:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src14.csv
[Sat Feb 25 18:44:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 18:44:44 2012] Spatial fit model total counts = 26.828400, observed total counts = 29.000000
[Sat Feb 25 18:44:44 2012] Offset between fit and detection position for source 14 = 0.004719 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.004719 pixels
  Position = (137.7, 559.0) = 20 33 55.84 41 28 28.6
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 26.2 +/- 5.1
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Sat Feb 25 18:44:44 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 18:44:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 18:44:44 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 18:44:44 2012] Source does appear to be extended
[Sat Feb 25 18:44:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 19:42:31 2012] Writing source region out to fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src14_src.reg
[Sat Feb 25 19:42:31 2012] Extracting stamp from image fullrun_ccd3_acisf10959_pi14-548_cl_sm2.00.img.gz, (121, 543) - (154, 575)
[Sat Feb 25 19:42:31 2012] Writing fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src14.gif
[Sat Feb 25 19:49:17 2012] Size of ../../acisf10959/products/events/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src14_src.evt.gz[events] = 26 counts
[Sat Feb 25 19:49:17 2012] Mean chipx,y = (886.19, 928.42)
[Sat Feb 25 19:49:17 2012] Mean tdetx,y = (4203.58, 3947.19)
[Sat Feb 25 19:49:17 2012] chipx,y range = (869.00-901.00, 911.00-944.00)
[Sat Feb 25 19:49:17 2012] Size of ../../acisf10959/products/events/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 5 counts
[Sat Feb 25 19:49:18 2012] Not generating rmf since there are only 26 counts
[Sat Feb 25 19:49:18 2012] arf not found, will run specextract
[Sat Feb 25 19:49:46 2012] ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src14.warf not found
[Sat Feb 25 19:49:46 2012] ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src14.wrmf not found
[Sat Feb 25 19:49:46 2012] Removal of ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src14.soff failed
[Sat Feb 25 20:15:03 2012] Spectrum 14 has only 26 counts, deleting rmf
[Sat Feb 25 20:15:03 2012] 200.896
[Sat Feb 25 20:15:30 2012] Updating aperture counts using extracted products
[Sat Feb 25 20:15:30 2012] Error reading totcts from fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src14_src.pi.gz
[Sat Feb 25 20:15:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 20:15:31 2012] Using photon index=1.80, rate=0.000929, arf fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src14.arf
[Sat Feb 25 20:15:31 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 20:15:31 2012] Updating source flux to 1.4e-14
[Sat Feb 25 20:16:02 2012] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 20:16:03 2012] acisf10959/analysis//spectral/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete