[Sat Feb 25 13:48:35 2012] Detection parameters:
  Position = (184.0, 449.7) = 20 33 53.79 41 27 35.1
  Extent = 0.6" x 0.6", rotation angle = 108 degrees
  Source counts = 15.7 +/- 4.1
  Background counts = 1.3
  Rate = 0.0006 +/- 0.0001

[Sat Feb 25 13:48:40 2012] Off-axis axis estimate = 1.57'
[Sat Feb 25 15:29:18 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 15:29:18 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Sat Feb 25 15:29:18 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.880
[Sat Feb 25 15:29:18 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 0.40"
[Sat Feb 25 16:21:50 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src27.ximg exists
[Sat Feb 25 16:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src27.csv
[Sat Feb 25 16:21:50 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src27_1.ximg exists
[Sat Feb 25 16:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src27.csv
[Sat Feb 25 16:21:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10959_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 16:21:51 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Sat Feb 25 16:21:51 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Feb 25 16:21:51 2012] Fit fullrun_ccd3_acisf10959_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Sat Feb 25 16:22:11 2012] Spatial fit model total counts = 18.857300, observed total counts = 19.000000
[Sat Feb 25 16:22:11 2012] Offset between fit and detection position for source 11 = 0.724298 pixels
[Sat Feb 25 16:22:11 2012] 19.239010 total counts/ 3.172710 bgd. counts: snr = 9.019878
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.724298 pixels
  Position = (184.5, 450.2) = 20 33 53.79 41 27 35.1
  Extent = 0.8 (0.5-0.9)", rotation angle = 0
  Source counts = 16.1 +/- 4.4
  Background counts = 3.2
  Rate = 0.0006 +/- 0.0002
[Sat Feb 25 16:22:11 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 16:22:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 16:22:11 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 16:22:11 2012] Source does appear to be extended
[Sat Feb 25 16:22:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 17:55:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 17:55:54 2012] Initial guess for spatial extent in simple fitting = 0.76"
[Sat Feb 25 17:55:54 2012] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.199
[Sat Feb 25 17:55:54 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 0.76"
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src27.ximg exists
[Sat Feb 25 18:44:24 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src27.csv
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src27_1.ximg exists
[Sat Feb 25 18:44:24 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src27.csv
[Sat Feb 25 18:44:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10959_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Sat Feb 25 18:44:24 2012] fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Sat Feb 25 18:44:24 2012] Fit fullrun_ccd3_acisf10959_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Sat Feb 25 18:44:44 2012] Spatial fit model total counts = 18.466100, observed total counts = 19.000000
[Sat Feb 25 18:44:44 2012] Offset between fit and detection position for source 11 = 0.029856 pixels
[Sat Feb 25 18:44:44 2012] 18.841790 total counts/ 3.231190 bgd. counts: snr = 8.684371
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.029856 pixels
  Position = (184.5, 450.2) = 20 33 53.79 41 27 35.1
  Extent = 0.8 (0.5-1.1)", rotation angle = 0
  Source counts = 15.6 +/- 4.3
  Background counts = 3.2
  Rate = 0.0006 +/- 0.0002
[Sat Feb 25 18:44:44 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 18:44:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 18:44:44 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 18:44:44 2012] Source does appear to be extended
[Sat Feb 25 18:44:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 19:42:31 2012] Writing source region out to fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src11_src.reg
[Sat Feb 25 19:42:31 2012] Extracting stamp from image fullrun_ccd3_acisf10959_pi14-548_cl_sm2.00.img.gz, (150, 415) - (219, 485)
[Sat Feb 25 19:42:31 2012] Writing fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src11.gif
[Sat Feb 25 19:56:14 2012] Size of ../../acisf10959/products/events/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src11_src.evt.gz[events] = 17 counts
[Sat Feb 25 19:56:14 2012] Mean chipx,y = (958.94, 834.41)
[Sat Feb 25 19:56:14 2012] Mean tdetx,y = (4297.59, 4019.94)
[Sat Feb 25 19:56:14 2012] chipx,y range = (941.00-977.00, 819.00-852.00)
[Sat Feb 25 19:56:14 2012] Size of ../../acisf10959/products/events/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 16 counts
[Sat Feb 25 19:56:15 2012] Not generating rmf since there are only 15 counts
[Sat Feb 25 19:56:15 2012] arf not found, will run specextract
[Sat Feb 25 19:56:42 2012] ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src11.warf not found
[Sat Feb 25 19:56:42 2012] ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src11.wrmf not found
[Sat Feb 25 19:56:42 2012] Removal of ../../acisf10959/products/spectra/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src11.soff failed
[Sat Feb 25 20:15:04 2012] Spectrum 11 has only 16 counts, deleting rmf
[Sat Feb 25 20:15:04 2012] 202.104
[Sat Feb 25 20:15:30 2012] Updating aperture counts using extracted products
[Sat Feb 25 20:15:30 2012] Error reading totcts from fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src11_src.pi.gz
[Sat Feb 25 20:15:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 20:15:31 2012] Using photon index=1.80, rate=0.000554, arf fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src11.arf
[Sat Feb 25 20:15:31 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 20:15:31 2012] Updating source flux to 8.3e-15
[Sat Feb 25 20:16:02 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Feb 25 20:16:03 2012] acisf10959/analysis//spectral/fullrun_ccd3_acisf10959_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete